• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.597-605
• /
• 2019

IPM bridge is an integral bridge that can be applied from span 30.0m up to 120.0m, the shape conditions of IPM bridge is also applicable to the rahmen bridge. In this study, to perform the structural analysis of Rahmen bridge and IPM Bridge, the researchers compared the distribution types such as load, moment, and displacement of those bridges. Structural analysis was carried out on four span models ranging from single span bridges to four spans of 120.0 m, based on span length of 30.0 m. Structural analysis was carried out on those bridge with span 30.0m up to 120.0m. The conclusions drawn from this study are as follows. 1) The bending moments were calculated to be large for the Rahmen bridge, and the horizontal displacements were estimated to be large for the IPM bridge. 2) Since the bending moments are derived by the span length rather than the extension of the bridge, the permissible bending moment for the span length should be considered in the design. 3) The pile bent of the IPM bridge did not exceed the plastic moment of the steel pipe pile at 120.0m span, but because the horizontal displacement in the shrinkage direction is close to 25mm, the design considerations are needed. 4) In the actual design, it is important to ensure stability against member forces, so review of the negative moment is most important.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.4
• /
• pp.7-20
• /
• 2004

This study was executed to find out how to improve the planting and use of landscaping plants in Chuncheon. The number of street trees was 17,877 in 2003. The major species of street trees were Ginkgo biloba(52.7％), Prunus sargentii(15.3％), Zelkova serrata(8.9％), Platanus occidentalis(7.3％). Salix babylonica and Platanus occidentalis were decreased, while Prunus sargentii and Zelkova serrata were increased. Salix babylonica is a good species for a lakeside city, but its seeds cause allergies to some people. Most of the trees have been removed in Chuncheon. The planting of Salix babylonica(♂) resulted in no problems, and it should be propagated to plant. The soil of several areas was analysed to investigate soil conditions. The outskirts of city had good conditions in pH, organic matter and minerals, but the downtown areas had high alkalic, due to alkali from footpath concrete blocks. Appropriate pruning adds to the aesthetic and prolongs the useful life; it also requires less managing of insects and diseases to maintain good healthy of street trees. Street trees were not properly pruned due to electric lines and shortage of pruning information. The pruning was controlled by Korea Electric Power Co, which has no pruning information. Pruning must be maintained by a professional landscape company to maintain good shape such as with Bonsai. The Shrubs planting zone between street trees and other trees, and preservation plates were established for healthy of street trees. They have to be repaired and maintained well to keep better environmental conditions. The number of tree and flower species of 68 schools in Chuncheon were 12 and 16, respectively. The species that showed high preference were Juniperus chinensis, Pinus koraiensis, Pinus densiflora, Rosa centifolia, Forsythia koreana, and Rhododendron schlippenbachii. The high frequency of the protection trees designated by Chuncheon were Pinus densiflora, Ginko biloba, Zelkova serrata, Quercus species. It was thought that the diversification of street tree species, the selection of street trees suitable to each space, the generalization of use of native species, the appropriate pruning and proper fertilization, the control of pests and diseases, and the opinions of citizens concerning landscape plants were needed to improve the planting, use and maintenance of landscaping plants in Chuncheon.

• The Korean Journal of Community Living Science
• /
• v.20 no.2
• /
• pp.157-168
• /
• 2009

This study was carried out to investigate the effect of eating behavior, physical status and tendency of eating disorder on the right eating habit. The subjects of this study were 324 middle school students and 340 high school students in Osan city GyeongGi province. The average of weight and height in the middle and high school students were 48.7kg, 160.0cm and 56.8kg, 164.8cm respectively. In PIBW values, 92.9% of middle school students and 99.1% of high school students were almost close to the average. The 28.5% of high school and 21.5% of middle school students were aware of themselves as overweight. The risk of eating disorders in high school students(16.4%) were higher than that in middle school students(4.9%). Moreover, the risk of eating disorders in girls high school students(19.3%) was significantly higher than those of middle school students(5.2%) (p<0.001). The thought of food problems were realized in 57.4% of in high school students and in 39.9% of in middle school students. The intake of food group frequency, middle school students ate more fruit than high school students(p<0.01). Boys ate more frequently soy beans (p<0.05) and algae(p<0.1) than girls in high school students. The meat intake was more frequent in high school students, but the eggs and milk were more in middle school students. The boys' intakes of fish and milk were more often than the girls' in high school students. Eating disorders and food intake frequency scores were closely correlated with weights(PIBW and the gap of ideal. weight with real weight). In conclusion, the education about realizing exact healthy body shape and how to modify behavior to prevent eating disorders should be planned since junior high school. Especially in high school girls, the variety food intake education would be needed. Proper recognition of the weight is required for good food intake and for prevent eating disorders.

• Journal of Biomedical Engineering Research
• /
• v.38 no.1
• /
• pp.9-15
• /
• 2017

Recently, flexible cages have been introduced in an attempt to absorb and reduce the abnormal load transfer along the anterior parts of the spine. They are designed to be used with the pedicle screw systems to allow some mobility at the index level while containing ROM at the adjacent level. In this study, a finite element (FE) study was performed to assess biomechanical efficacies of the flexible cage when combined with pedicle screws with flexible rods. The post-operated models were constructed by modifying the L4-5 of a previously-validated 3-D FE model of the intact lumbar spine (L2-S1): (1) Type 1, flexible cage only; (2) Type 2, pedicle screws with flexible rods; (3) Type 3, interbody fusion cage plus pedicle screws with rigid rods; (4) Type 4, interbody fusion cage plus Type 2; (5) Type 5, Type 1 plus Type 2. Flexion/extension of 10 Nm with a compressive follower load of 400N was applied. As compared to the Type 3 (62~65%) and Type 4 (59~62%), Type 5 (53~55%) was able to limit the motion at the operated level effectively, despite moderate reduction at the adjacent level. It was also able to shift the load back to the anterior portions of the spine thus relieving excessively high posterior load transfer and to reduce stress on the endplate by absorbing the load with its flexible shape design features. The likelihood of component failure of flexble cage remained less than 30% regardless of loading conditions when combined with pedicle screws with flexible rods. Our study demonstrated that flexible cages when combined with posterior dynamic system may help reduce subsidence of cage and degeneration process at the adjacent levels while effectively providing stability at the operated level.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.3
• /
• pp.254-261
• /
• 2012

To reduce the injury by continuous cropping of sweet potato (Ipomoea batatas (L.) Lam.), the farmer's plant and virus-free plant were cultivated with the density of $70{\times}25cm$ (June 10, 2011) in continuous cropping soil (CCS) and subsoiling reversion soil (SRS). Fertilizer was applied at the rates of 55-63-156 $kg\;ha^{-1}$ ($N-P_2O_5-K_2O$) and 10 $ton\;ha^{-1}$ of cattle manure in CCS, and it was applied the 50% increased cattle manure compost and nitrogen in DRS. Symptoms of viral infection were revealed in the farmer's plant at 30 days after planting, but there were no symptoms in virus-free plant. The yield of virus-free plant was more increased 15% and 10.5% than that of farmer's plant in DRS and CCS, respectively. The yield of sweetpotato in SRS was more increased 8.8% and 3.2% in farmer's plant and virus-free plant compared to CCS, respectively. In DRS, the rate of marketable tuber of virus-free plant was increased by 80% compared to the farmer's plant (60.1%). The virus-free plant was produced the tuber with more brilliant peel color and well-formed shape compared to the farmer's plant. The increased yield of virus-free plant and in SRS soil condition showed a positive relationship (p=0.05) with the number of leaf per plant at 30 days and the number of branch per plant at 120 days after planting. The results showed that the early growth after planting was very important for the development of storage root. Therefore, the deep-subsoil reversion and cultivation of virus-free plant could be reduced the injury by continuous cropping of sweet potato, and increased farm income.

• Journal of Wetlands Research
• /
• v.11 no.3
• /
• pp.161-169
• /
• 2009

Rainfall-runoff procedures of urban area are more complicated than agricultural procedures. Extension and development of town leads to shift of the basin characteristics and it makes more difficult to use runoff models. In this study, the changes of hydrologic circumstances and the shape of hydrograph due to the urbanization in Cho-kyung river basin has been assessed which is the representative urban stream in Jeonju city. The urbanization can be classified as four typical year. The natural basin period(1924) that is before the urban development, the period of construction of Chonbuk National University campus (1963), the period of construction of residential area(1986), and urbanization process has been finally completed in 1995. The rainfall-runoff analysis has been carried out by Storm Water Management Model(SWMM) under condition of the basin characteristics and impervious area of each period. It was found that hydrologic characteristics such as river length, roughness coefficient, and coefficient of surface storage has been decreased. According to the land use change, the pervious area was decreased from 97.7% to 42%, while the impervious area was increased from 0.6% to 34%. The time of concentration was shorten from 90 minutes to 37 minutes. Along with decreasing the time of concentration, the peak discharge was increased from $4.37m^3/s$ to $111.13m^3/s$, and the runoff rate was also increased from 0.8% to 68%.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.4
• /
• pp.223-233
• /
• 2021

Systematic and continuous monitoring and management of the energy consumption of buildings are important for estimating building energy efficiency, and ultimately aim to cope with climate change and establish effective policies for environment, and energy supply and demand policies. Globally, buildings consume 36% of total energy and account for 39% of carbon dioxide emissions. The purpose of this study is to generate three-dimensional thermo-spatial building models with photogrammetric technique using drone TIR (Thermal Infrared) images to measure the temperature emitted from a building, that is essential for the building energy rating system. The aerial triangulation was performed with both optical and TIR images taken from the sensor mounted on the drone, and the accuracy of the models was analyzed. In addition, the thermo-spatial models of temperature distribution of the buildings in three-dimension were visualized. Although shape of the objects 3D building modeling is relatively inaccurate as the spatial and radiometric resolution of the TIR images are lower than that of optical images, TIR imagery could be used effectively to measure the thermal energy of the buildings based on spatial information. This paper could be meaningful to present extension of photogrammetry to various application. The energy consumption could be quantitatively estimated using the temperature emitted from the individual buildings that eventually would be uses as essential information for building energy efficiency rating system.

• Journal of Life Science
• /
• v.26 no.3
• /
• pp.289-295
• /
• 2016

Sorbus commixta, a flowering plant in the Rosaceae family, is native to Japan and Ulleung Island, Korea. This plant is also called maga-mok or mai-mok in Korea because the bud of the stem has a similar shape to the teeth of a horse. In this study, hot water extracts from different parts of S. commixta, such as leaf, stem, and immature and mature fruits, were prepared, and their antithrombosis and antioxidant activities were evaluated. The extraction yield and pH of stem extracts were 3.99% and 5.5, respectively. The stem extracts contained 89.2 mg/g of total polyphenols and 28.3 mg/g of total flavonoids. The hot water extracts prepared from the leaf, stem, immature, and mature fruit of S. commixta exhibited no hemolytic activity against human red blood cells, up to a concentration of 0.5 mg/ml. In an anticoagulation assay, the stem extracts showed strong extension in thrombin, prothrombin, and activated partial thromboplastin times, whereas the other extracts had no anticoagulation activity. In a platelet aggregation inhibitory activity assay, all the extracts tested had no inhibitory activity against human platelets. With regard to antioxidation activity, the stem extracts showed stronger radical scavenging activity and reducing power activity than the other extracts. The calculated RC₅₀s, the concentration required for 50% radical scavenging activity, for DPPH anions, ABTS cations, and nitrite of the crude stem extracts were 119.7, 53.3, and 117.5 μg/ml, respectively, whereas they were 13.7, 5.2, and 14.9 μg/ml for DPPH anions, ABTS cations, and nitrite, respectively, for vitamin C. The results suggest that the stem extracts of S. commixta have strong potential for use as a novel resource for antithrombosis agents.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.1
• /
• pp.1-10
• /
• 2022

In this study, the two horizontal shroud tidal current energy converter, which can generate power even under low flow speed conditions, was developed. In order to determine the shape of the shroud system, a three-dimensional numerical simulation test was conducted, and a 1/6 scale down model was made to perform a hydraulic model experiment. The hydraulic model experiment was performed under four flow conditions, and the flow speed, torque, and RPM were measured for each experimental case. As a result of the numerical simulation test, it was found that the flow speeds passing through the nozzle were increased by about 2~3 times in the cylinder, and when the extension ratio was 2:1, the highest flow speed was shown. In addition, it was found that the flow speeds increased 2.8 times when the diameter ratio between the nozzle and the cylinder was 1.5:1. Meanwhile, as a result of the hydraulic model experiment, it was found that when the tip speed ratio was between 1.75 and 2, the power coefficient was 0.32 to 0.34.

• Journal of Biomedical Engineering Research
• /
• v.28 no.3
• /
• pp.397-409
• /
• 2007

Owing to needs of biomechanical comprehension and analysis to obtain various medical treatment designs which are related with the spine in order to cure and diagnose LBP patients, the FE modeling and nonlinear analysis of lumbosacrum including a partial ilium and iliolumbar ligaments, were carried out. First, we investigated whether the geometrical configuration of vertebrae displayed by DICOM slice files is regular and normal condition. After constructing spinal vertebrae including a partial ilium, a sacrum and five lumbars (from L1 to L5)with anatomical shape reconstructed using softwares such as image modeler and CAD modeler, we added iliolumbar ligaments, lumbar ligaments, discs and facet joints, etc.. And also, we assigned material property and discretized the model using proper finite element types, thus it was completely modeled through the above procedure. For the verification of each segment, average sagittal ROM, average coronal ROM and average transversal ROM under various loading conditions(${\pm}10Nm$), average vertical displacement under compression(400N), ALL(Anterior Longitudinal Ligament) and PLL(Posterior Longitudinal Ligament) force at L12 level, strains of seven ligaments on sagittal plane at L45 level and maximal strain of disc fibers according to various loading conditions at L45 level, etc., they were compared with experimental results. For the verification of multilevel-lumbosacrum spine including partial ilium and iliolumbar ligaments, the cases with and without iliolumbar ligaments were compared with ROM of experiment. The results were obtained from analysis of the verified FE model as follows: I) Iliolumbar ligaments played a stabilizing role as mainly posterior iliolumbar ligaments under flexion and as both posterior and anterior iliolumbar ligaments of one side under lateral bending. 2) The iliolumbar ligaments decreased total ROM of 1-8% in total model according to various motion conditions, which changed facet contact forces of L5S level by approximately 0.8-1.4 times and disc forces of L5S level by approximately 0.8-1.5 times more than casewithout ilioligaments, under various loading conditions. 3) The force of lower discs such as L45 and L5S was bigger than upper discs under flexion, left and right bending and left and right twisting, except extension. 4) It was predicted that strains of posterior ligaments among iliolumbar ligaments would produce the maximum 16% under flexion and the maximum 10% under twisting. 5) It's expected that this present model applies to the development and design of artificial disc, since it was comparatively in agreement with the experimental datum.