• Korean Journal of Microbiology
• /
• v.28 no.3
• /
• pp.278-282
• /
• 1990

Diffusion and partition of progesterone into the polyacrylamide gel was examined. Diffusion coefficient of progesterone decreased down to an asymptotic value as the concentration of the organic solvents in the diffusing medium increased. However the partition coefficient diminished steadily. Crosslinking density in the gel didn't affected the diffusion coefficient considerably but lowered the partition coefficient due to the contraction of pore volume of the gel. Progesterone showed higher diffusion coefficient as well as partition coefficient in the polyurethane than in the polyacrylamide gel, which seems to be ascribed to the difference in hydrophobicity, pore volume and pore size of the polymer matrix.

• Journal of Korean Society for Atmospheric Environment
• /
• v.2 no.2
• /
• pp.41-50
• /
• 1986

Urban aerosol concentrations in the size range of $0.01 \sim 1.0 \mum$ have been measured by using an electrical aerosol analyzer from May through October, 1984. The total diurnal variation of the number concentration indicates that a minimum value is observed at 3 hr and a sharp increase is noticed early in the morning with a subsequent slow and continuous increase from around 7 hr until 20 hr. After that it is decreased to reach its minimum by dawn. However, both surface and volume concentrations have shown that their first maxima at 8 hr and their second at about 20 hr simultaneously. It is found that the aerosol number is mainly governed by the particles in the size range of $0.01 \sim 0.1 \mum$, while most volume is in $0.1 \sim 1.0 \mum$ size range. It is known fact that particles of $0.1 \sim 1.0 \mum$ size range affect the visibility reduction in the atmosphere. The monthly variation of aerosol concentration remarks its minimum in summer. The main factors influencing the aerosol concentration are emission of autoexhausts, various processes of production and removal, and meteorological parameters.

• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.1
• /
• pp.65-75
• /
• 2016

Purpose : By analyzing seroma volume changes in the patients who underwent Partial breast radiation therapy after breast conserving surgery, we try to contribute to the improvement of radiotherapy effect. Materials and Methods : Enrolled 20 patients who underwent partial breast radiation therapy by ViewRay MRIdian System were subject. After seeking for the size of the removed sample in the patients during surgery and obtained seroma volume changes on a weekly basis. On the Basis of acquired volume, it was compared with age, term from start of the first treatment after surgery, BMI (body mass index) and the extracted sample size during surgery. And using the ViewRay MRIdian RTP System, the figure was analyzed by PTV(=seroma volume + margin) to obtain a specific volume of the Partial breast radiation therapy. Results : The changes of seroma volume from MR simulation to the first treatment (a week) is 0~5% in 8, 5~10% in 3, 10 to 15% in 2, and 20% or more in 5 people. Two patients(A, B patient) among subjects showed the biggest change. The A patient's 100% of the prescribed dose volume is 213.08 cc, PTV is 181.93 cc, seroma volume is 15.3 cc in initial plan. However, while seroma volume decreased 65.36% to 5.3 cc, 100% of the prescribed dose volume was reduced to 3.4% to 102.43 cc and PTV also did 43.6% to 102.54 cc. In the case of the B patient, seroma volume decreased 42.57% from 20.2 cc to 11.6 cc. Because of that, 100% of the prescribed dose volume decreased 8.1% and PTV also did to 40%. Conclusion : As the period between the first therapy and surgery is shorter, the patient is elder and the size of sample is smaller than 100 cc, the change grow bigger. It is desirable to establish an adaptive plan according to each patient's changes of seroma volume through continuous observation. Because partial breast patients is more sensitive than WBRT patients about dose conformity in accordance with the volume change.

• Transactions of Materials Processing
• /
• v.11 no.8
• /
• pp.682-690
• /
• 2002

The formation of adiabatic shearband in tungsten heavy alloys(WHA) was studied in this investigation. Five prismatic specimens were loaded by high velocity impacts and treated as plane strain problems. To find out the effect of particle's volume ratio, specimens containing 81%, 93% and 97% volume percents of tungsten particles were used. Also the effects of particle's geometry and size on the formation of shearband were studied for 81% volume percent alloys by small size particle model, large size particle model and undulated particle models, and the results were discussed.be used to diagnose the causes of necking and fracture in industrial practice and to investigate whether these defects were caused by material property variation, changes in lubrication, or incorrect press settings. In non-axisymmetric deep drawing, three modes of forming regimes are found: draw, stretch, plane strain. The stretch mode for non-axisymmetric deep drawing could be defined when the major and minor strains are positive. The draw mode could be defined when the major strain is positive and minor strain is negative, and plane strain mode could be defined when the major strain is positive and minor strain is zero. Through experiments the draw mode was shown on the wall and flange are one of a drawn cup, while the plane strain and the stretch mode were on the punch head and the punch corner area respectively, We observed that the punch load of elliptical deep drawing was decreased according to increase of die corner radius and the thickness deformation of minor side was more large than major side.

• Bulletin of the Korean Chemical Society
• /
• v.5 no.3
• /
• pp.112-117
• /
• 1984

The association constants (K) of 3,5,N-trimethyl pyridinium iodide in 95 volume percent ethanol-water mixed solvent were determined by a modified UV and conductance method at $25^{\circ},\;30{\circ},\;40{\circ}\;and\;50{\circ}C$ over the pressure range 1 to 2000 bars. The association process is enhanced with increasing pressure and decreasing temperature. From K values, we obtained the total partial molar volume change (${\Delta}V$) and some thermodynamic parameters. The electrostriction volume (${\Delta}V_{el}$) and intrinsic volume (${\Delta}V_{in}$) were also evaluated. The values of ${\Delta}V,\;{\Delta}V_{el},\;{\Delta}V_{in}$ are negative, negative and positive, respectively, and the absolute values of all these three decrease with increasing pressure and temperature. The ion-pair size (a) were varied 3 to 6 ${\AA}$, with pressure and temperature. The solvation number (n) decreased from 2 to 0.5 with increasing temperature.

• Journal of Power System Engineering
• /
• v.11 no.1
• /
• pp.115-120
• /
• 2007

The effect of grain size on the damping capacity of Fe-26Mn-2Al alloy studied in this paper has been investigated after changing the microstructure by cold rolling and changing grain size. Micro structures in Fe-26Mn-2Al at room temperature consist of a large quantity of austenite and a small quantity of ${\varepsilon}\;and\;{\alpha}'$ martensite. And ${\varepsilon}\;and\;{\alpha}'$ martensite was increased by increasing the degree of cold rolling. The content of deformation induced martensite was increased with increasing the degree of cold rolling. Damping capacity was linearly increased with increasing ${\varepsilon}$ martensite content, which suggests that stacking faults and ${\varepsilon}$ martensite variant boundaries are the principle damping sources. With increasing the grain size in Fe-26Mn-2Al alloy, the damping capacity was increased due to increasing the volume fraction of ${\varepsilon}$ martensite by decrement in stability of austenite phase. With decreasing the grain size, the content of deformation induced martensite was decreased and the damping capacity was decreased.

• KCID journal
• /
• v.17 no.2
• /
• pp.57-70
• /
• 2010

This study was performed to analyze the affect of water supply capacity followed by allocating flood control volume in heightening reservoir, of which Baekgog reservoir was selected as a case study in here. Baekgog reservoir is located in Jincheon county, Chungbuk province, of which full water level will be heightened from EL. 100. 1m to EL. 102.1m, and total storage from 21.75M $m^3$ to 26.67M $m^3$. Flood inflow with 200year frequency was estimated to 997 $m^3$/s in peak flow and 22.54M $m^3$ in total volume. Reservoir flood routing was conducted to determine flood limited water levels, which was determined to have scenarios such as EL 97-98-99m in periods of 6.21.-7.20., 7.21.-8.20., and 8.21.-9.20., respectively, EL 97-97-97m, EL 98-98-98m in present reservoir, and EL 99-100-101m, EL 99-99-99m, and EL 100-100-100m in heightened reservoir. Reservoir inflow was simulated by DAWAST model. Annual paddy irrigation requirement was estimated to 33.19M $m^3$ to 2,975ha. Instream flow was allocated to 0.14mm/d from October to April. Operation rule curve was drawn using inflow, irrigation and instream flow requirements data. In case of withdrawal limit reservoir operation using operation rule curve, reduction rates of annual irrigation supply before and after flood control by reservoir were 2.0~4.3% in present size and 1.5~3.6% in heightened size. Reliability on water supply was decreased from 77.3% to 63.6~68.2% in present size and from 81.6% to 72.7~79.5% in heightened size. And reduction rates of water storage at the end of year before and after flood control by reservoir were 7.3~16.5% in present size and 7.7~16.9% in heightened size. But water supplies were done without any water deficiency through withdrawal limit reservoir operation in spite of low flood regulating water level.

• Journal of the Korean Society of Radiology
• /
• v.82 no.6
• /
• pp.1534-1544
• /
• 2021

Purpose To examine the effect of lung volume on the size and volume of pulmonary subsolid nodules (SSNs) measured on CT. Materials and Methods A total of 42 SSNs from 31 patients were included. CT examination was first performed at total lung capacity (TLC), and a section containing the nodule was additionally scanned at tidal volume (TV). The diameter and volume of each SSN, as well as the cross-sectional lung area containing the nodule, were measured. The significance of the changes in measurements between TLC and TV within the same individuals was evaluated. Results The lung area and the diameter and volume of SSNs decreased significantly at TV by 12.7 cm², 0.5 mm, and 46.4 mm³ on average, respectively (p < 0.001), compared to those at TLC. Changes in lung area between TV and TLC were positively correlated with the change in SSN diameter (p = 0.027) and volume (p = 0.014). However, after correction (by considering the change in lung area), the changes in SSN diameter (p = 0.124) and volume (p = 0.062) were not significantly different. Conclusion SSN size and volume can be significantly affected by lung volume during CT scans of the same individuals.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.3
• /
• pp.53-58
• /
• 2002

This paper was performed to investigate the effect of pore structure on ink residual behavior. To prepare different coating structures as substrates against inks, fine, medium and coarse calcium carbonate were used in the coating color. It is well known ink properties can affect to print qualities. After printing on the coated paper, ink layer can consider as third structure addition to paper and coating layer. To compare effect of ink properties on the surface structure and print qualities, several properties of ink were also adopted as raw material. Particle size of pigment effect on gloss evaluation of coated paper increased with calendering. It was shown that ink transfer rate increased as surface of the sample was smooth. The ink contained low viscosity resin evaluated more print gloss. Finer pigment particle size, smaller pore size and higher porosity. Pore volume of coated paper was slightly decreased with printing as the coating was prepared with the finest particle size. However, it founded that ink resin could not affect on pore volume and distribution of printed paper

• Biomolecules & Therapeutics
• /
• v.20 no.2
• /
• pp.239-244
• /
• 2012

This study examined the inhibitory effects of 4-guanidinobutyric acid (4GBA), an alkaloid, against gastric lesions by assessing the inhibition of Helicobacter pylori (H. pylori) and gastric cancer cells. Acute and chronic gastritis were also observed using HCl/ethanol (EtOH) and indomethacin-induced gastric lesion models, respectively. 4GBA inhibited the growth of H. pylori in a dose dependent manner, and showed acid-neutralizing capacity. In the pylorus ligated rats, 4GBA decreased the volume of gastric secretion and gastric acid output slightly, and increased the pH. 4GBA at a dose of 100 mg/kg reduced the size of HCl/EtOH-induced gastric lesions (70.8%) and indomethacin-induced gastric lesions (38.8%). The antigastritic action of 4GBA might be associated with the acid-neutralizing capacity, anti-H. pylori action, and decreased volume of gastric secretion. These results suggest that 4GBA might be useful in the treatment and/or protection of gastritis.