• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• 제5권1호
• /
• pp.70-82
• /
• 1994

본 연구에서는 다양한 임상 집단과 정상 집단의 아동들을 대상으로 한국판 아동용 Luria-Nebraska 신경심리 검사(LNNB-C)의 타당도와 임상적 유용성에 대해 알아보았다. 8세에서 12세 연령 범위의 뇌손상 집단(N=19), 뇌손상이 의심되는 ADHD 집단(N=16), 소아정신과 장애 집단(N=16), 그리고 정상 아동 집단(N=147)을 대상으로 한국판 LNNB-C의 진단적 변별력을 검증하였고, BGT, KEDI-WISC와의 상관 관계를 알아보았다. 정상 집단과 뇌손상 집단간에 LNNB-C 모든 척도상에서 유의미한 차이가 있었으며, 정상 집단과 ADHD 집단간에도 뇌손상 진단에 중요한 11개 임상 척도와 3개의 요약 척도에서 모두 유의미한 차이가 있었다. ADHD와 뇌손상 집단간에는 요약 척도(병리 척도, 좌반구 척도 및 우반구 척도)에서 유의미한 차이가 있었으므로, 요약 척도가 ADHD와 뇌손상 집단을 변별하는데 있어 중요한 척도임이 시사되었다. 정상 집단과 소아정신과 장애 집단간에는 모든 척도상에서 유의미한 차이가 없었다. LNNB-C 척도점수에 의한 판별 분석 결과, LNNB-C 척도가 전상 집단의 98.6%를 정확히 정상 집단으로, ADHB집단의 62.5%를 ADHD 집단으로, 그리고 뇌손상 집단의 73.7%를 뇌손상 집단으로 정확히 판별하였으며, 전체 정확 판별율이 92.9%였다. 전체 문항들중에서는 정상 집단과 뇌손상 집단을 유의미하게 변별해주는 문항이 131개 (87.9%)였으며, 정상과 ADHD 집단을 변별해주는 문항이 55개(36.9%), ABHD와 뇌손상 집단을 구분해주는 문항이 52개(34.9%), 그리고 ABHD와 소아정신과 집단을 구분해주는 문항이 23개 (15.4%)인 것으로 나타났다. LNNB-C 임상 척도들과 BGT 오류 점수간에 유의미한 정적 상관관계가 있었고, 몇개의 척도를 제외하고는 LNNB-C와 KEDI-WISC 척도 점수들간에도 유의미한 부적 상관이 있는 것으로 나타났으며, 특히 LNNB-C의 지적 과정 척도(C11)와 FSIQ간에 가장 높은 부적 상관을 보여주었다. 이러한 절과들은 모두 뇌손상을 진단하는 신경심리 검사로서 한국판 LNNB-C의 타당도 및 진단 변별력이 우수함을 입증해주는 결과라 할 수 있다.

• Elastomers and Composites
• /
• 제55권2호
• /
• pp.81-87
• /
• 2020

Service life prediction and evaluation of rubber components is the foundational technology necessary for securing the safety and reliability of the product and to ensure an optimum design. Even though the domestic industry has recognized the importance thereof, technology for a systematic design and analysis of the same has not yet been established. In order to develop this technology, identifying the fatigue damage parameters that affect service life is imperative. Most anti-vibration rubber components had been damaged by repeated load and aging. Hence, the evaluation of the fatigue characteristics is indispensable. Therefore, in this paper, we propose a method that can predict the service life of rubber components relatively accurately in a short period of time. This method works even in the initial designing stage. We followed the service life prediction procedure of the proposed rubber components. The weak part of the rubber and the maximum strain were analyzed using finite element analysis of the rubber bushing for the tracked vehicles. In order to predict the service life of the rubber components that were in storage for a certain period of time, the fatigue test was performed on the three-dimensional dumbbell specimen, based on the results obtained by the rubber material acceleration test. The service life formula of the rubber bushing for tracked vehicles was derived using both finite element analysis and the fatigue test. The service life of the rubber bushing for tracked vehicles was estimated to be about 1.7 million cycles at room temperature (initial stage) and about 400,000 cycles when kept in storage for 3 years. Through this paper, the service life for various rubber parts is expected be predicted and evaluated. This will contribute to improving the durability and reliability of rubber components.

• 한국식품영양과학회지
• /
• 제19권2호
• /
• pp.133-142
• /
• 1990

This study was attempted to compare the nutritive value of leaf with stem of the water cress Oenanthe stolonifera DC. in order to improve the eating habits and as a part of studying on the effective curing nutrients for the damaged liver. The contents of moisture crude proteinon the effective curing nutrients for the damaged liver. The contents of moisture crude protein crude fat and crude ash were 90.40% 2.85%, 0.42% and 0.74% in leaf while the contents of moisture crude protein crude fat and crude ash were 95.15% 0.77% 0.09%, and 0.64% of moisture crude protein crude fat and crude ash were 95.15% 0.77% 0.09% and 0.64% in stem respectively. The quantitative fractionation of proteini of both leaf and stem ranked albumin the highest content followed globulin prolamin and glutelin in order. It has been sh-own by SDS-polyacrylamide gel electrophoresis that water extractable protein of leaf 11 bands but those of stem were not detected. The scope of molecular weight for the main protein of water extractable protein of leaf was between 34.700 and 45,000. The amounts of extractive-nitrogen from leaf and stem of the water cress were 241.02mg% and 271.67mg% respec-tively. The amounts of free amino acid-nitrogen from the leaf and stem were 89.02mg% and 32.02mg% respectively. In free amino acid-nitrogen from the leaf and stem were 89.02mg% and 32.02mg% respectively. In free amino acid composition of both leaf and stem the major components were aspartic acid and glutamic acid. In total amino acid composition of water cress leaf aspartic and glutamic acid were the major components. Whereas alanine and thr-eonine were the major components in stem The assessment of water cress leaf and stem with chemical score. EAAl Rl showed that the values of stem were lower tendancy than those of leaf. Limiting amino acid of leaf was tryptophan while that of stem was lysine.

• 한국농공학회지
• /
• 제24권1호
• /
• pp.23-30
• /
• 1982

The aim of this report is to analyze the Occurring rate of damage at each region of head works and to clear its damaged mechanism, centering around the destroyed situations of head works along both Musim and Bochong Rivers suffered from the storm flood occurred on July 22, 1980. The results obtained from the investigation of 25 head works taken for samples are summarized as follows. 1. The occurring rate of damage at each region of head works showed the largest number of 100 percentage in the revetment and protected riverbed work respectively, in the order of the next largest number, 68 percentage in weir body, 56 percentage in apron and 36 percentage in bank. 2. The destructive damage of revetment influenced largely on sweeping bank away, and destructive sufferings of weir body and protected bed work affected on the destructi on of apron, otherwise the destructive sufferings of apron reversely also acted on the- destruction of weirbody and protected bed work. In other hand, partial damage of weir body at the side of revetment is largely influenced by destructive sweeping away of bank. 3. It was showed that the destructive phenomena of weir body occurred largely at the part of concentrated flow and also had a deep relation with scoring by concentrated flow around upstream foundation of weir. 4. The suffered region of revetment is the down stream part just near weir body and the degree of damage is more severe at the curved part of bank that center of flow is concentrated.

• Korean Journal of Acupuncture
• /
• 제20권4호
• /
• pp.99-119
• /
• 2003

Objectives : The Jap Byoung(雜病) of the Young Chu(靈樞), one of the classical book of oriental medicine contains symptoms and remedies for various diseases that can be seen on human body. But it is too difficult to understand the Jap Byoung(雜病), because it is written in old chinese and there are many printer's error and omissions or adds in this book. As a consequence of above reason, the writer of this article has researched to find out the exact meaning of that. Methods : So in this part we study a woodblock-printed book of successive generation and view of annotators, and add adding notes, adjustment, translation to exact comprehension of the original text. Results & conclusions : The principle ideas of the thesis can be summarized as follows: The Jap Byoung(雜病) is consist of five part. In chapter 1, we present symptoms occurred by the upstream current of Qi(氣逆) and their treatments by taking meridian flowing the body parts on which the symptoms occur. In chapter 2, we deal with symptoms such as ikgun(?乾), a pain of the knee(膝中痛), huby(喉痺), epistaxis(?血), lumbago(腰痛), anger(怒), a pain of the jaw(痛), a pain of the nape(項痛) and their remedies. In chapter 3, since abdominal inflation occurs when the Qi(氣) of the five viscera(五臟) is damaged or go upstream, I discussed that the treatment should be given by taking the meridian accordingly. In chapter 4, we deal with the remedy for heartache, and different meridians to be taken by symptom, and parts on which needle to be used, and detailed remedies. In chapter 5, we present other diseases, detailed body parts to be cured and remedies by referring symptoms for a pain of the jaw(痛), the upstream current of Qi(氣逆), hiccup, etc. Especially, we introduce a part of Doinbup(導引法) for wegurl(?厥) and remedies for hiccup such as inducing sneeze by stimulating nostrils, holding one's breath, etc.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.1023-1026
• /
• 2013

위 펄스형 방사선에 노출된 전자장비는 전자소자 내부에서 발생되는 전자-정공쌍(EHP)과 이들이 형성한 순간 광전류로 Upset, Latchup, Burn out 과 같은 다양한 피해를 입게 된다. 이와같은 손상은 군무기체계나 우주항공 장비의 경우 군전력 손실이나 장비의 기능정지로 나타나 국가적으로 큰 손실을 초래할 수 있다. 본 연구에서는 펄스형 감마방사선으로 부터 전자장비/소자를 보호하기 위한 방호기술개발의 일환으로 '방사선 감지 및 제어장치'를 구현하고 대표적으로 군장비에 사용되는 전자소자에 대한 기능검증을 시도하였다. 펄스 방사선에 Latchup 및 Burn out 손상특성을 나타내는 LM118 소자에 개발한 '방사선 감지 및 제어장치'를 적용하여 펄스방사선 조사시험을 수행한 결과 LM118이 안전하게 보호됨을 확인하였다.

• 상하수도학회지
• /
• 제28권2호
• /
• pp.171-179
• /
• 2014

In this study, a novel method was proposed to test the integrity of water treatment system specifically equipped with membrane filtration process. We applied the silica particles coated with a fluorescent agent (rhodamine B isothiocyanate) as a surrogate to detect a membrane process integrity and evaluate the reliability of effluent quality in the system. Additionally, a series of experiments was conducted to evaluate the sensitivity of the method through the laboratory scale experiment. The laboratory scale experiments showed that the feasibility of application of proposed method to detect a breach or damaged part on the membrane surface. However, the sensitivity on predicting the area of a breach was significantly influenced by the testing conditions such as a concentration of surrogate, filtration flux, and detection time. The lowest error of predicting the area of breach was 3.5% at the testing condition of surrogate concentration of 80 mg/L injected with flux of $20L/m^2/hr$ for 10 minutes of detection time for the breach having the actual area of $7.069mm^2$. However, the error of estimation was increased at the small breach with area less than $0.785mm^2$. A future study will be conducted to estimate a damaged area with more accuracy and precision.

• 한국지반공학회논문집
• /
• 제37권12호
• /
• pp.117-125
• /
• 2021

시민의 안전을 위협하는 지반재해 중 하나인 지반함몰이 최근 도심지에서 빈번하게 보고되고 있다. 다양한 지반함몰 발생 메커니즘 중, 하수관 손상부를 통한 토사 유실이 서울시에서 발생하는 지반함몰의 주요원인으로 나타났다. 본 연구에서는 서울시 하수관 정보와 지반함몰이 발생한 위치 정보를 기반으로 머신러닝 기법 중 하나인 랜덤 포레스트 알고리즘을 이용하여 하수관 정보로부터 손상 하수관으로 유발되는 지반함몰의 발생 여부를 예측하는 모델을 학습하였다. 모델 성능 평가 결과, 본 연구에서 도출한 모델이 지반함몰을 상당히 훌륭하게 예측할 수 있는 것으로 나타났다. 또한, 입력변수로 사용한 하수관 정보 중 하수관 길이, 해발고도, 경사, 매립 심도, 하수관 순서로 지반함몰 발생 위험에 영향을 미치는 것을 확인하였다. 본 연구의 결과는 지반함몰 위험도 지도 작성, 지하공동 탐사 계획 수립 및 하수관 정비 사업 계획 수립의 기초 자료로 활용될 수 있을 것으로 기대된다.

• 한국지반신소재학회논문집
• /
• 제15권4호
• /
• pp.9-16
• /
• 2016

2004년 일본의 니가타켄 츄에츠 지방의 나가오카, 오지야시에서 1,450개 이상의 지하구조물이 1.5m까지 부상하였다. 융기손상은 Lifeline 시스템의 일부인 하수 시스템의 흐름뿐만 아니라 교통흐름을 방해로 인해 심각한 문제를 야기 시킨다. 복구작업의 경우 손상된 하수 시스템의 오픈 컷 조사는 나가오카시 정부에 의해 수행되었다. 지진으로 인한 매설된 파이프 라인의 손상에 대한 중요한 데이터는 조사결과로부터 수집하였다. 본 연구는 지하 구조물의 부상량에 영향을 미치는 요인을 SPT 시추공 logs를 통해 손상된 지역의 위치와 파이프라인의 경사를 포함하는 데이터를 사용하여 조사하였다. 지하구조물의 부상과 영향을 받는 지역의 지질학적 특성 사이의 상관관계 분석을 통해 부상현상의 주요변수는 지하수의 깊이, 원지반에서의 점토층 두께, SPT N값인 것으로 밝혔다.

• 한국산업융합학회 논문집
• /
• 제25권4_2호
• /
• pp.699-706
• /
• 2022

In this study, Directed energy deposition (DED) among additive manufacturing is applied to repair damaged spindle key parts of planner miller. The material of the spindle key is SCM415, and the P21 Powder is used. In order to find the optimal deposition conditions for DED equipment, a single-line deposition experiment is conducted to analysis five parameters. The laser power affects the width, and the height is a parameter affected by coaxial gas and powder gas. In addition, laser power, powder feed rate, coaxial gas, and powder gas are parameters that affect dilution. Otimal deposition is that 400 W of laser power, 4.0 g/min of powder feed rate, 6.5 L/min of coaxial gas, 3.0 L/min of powder gas and 4.5 L/min of shield gas. By setting the optimum conditions, a uniform deposition cross section in the form of an ellipse can be obtained. Damage recovery process of spindle key consists of 3D shape design of the base and deposition parts, deposition path creation and deposition process, and post-processing. The hardness of deposited area with P21 powder on the SCM415 spindle key is 336 HV for the surface of the deposition, 260 HV for the boundary area, and 165 HV for the base material.