• Food Science and Biotechnology
• /
• 제17권1호
• /
• pp.184-187
• /
• 2008

S-Adenosyl-L-methionine (SAM) is an important metabolic intermediate in living organisms and participates in many reactions as a methyl group donor. SAM has been used as a dietary supplement and is proposed to have beneficial effects on the liver and brain. The aim of this study was to find lactic acid bacteria with high SAM-producing ability to be used as SAM enhancing probiotics. We used high performance liquid chromatography (HPLC) to quantify the amount of SAM produced, and found that Bifidobacterium bifidum BGN4 produced a significantly higher amount of SAM than other Bifidobacterium or Lactobacillus strains. The effect of various carbon and nitrogen sources on SAM production was examined. This study confirmed that Bifidobacterium may be utilized as a source of SAM in the functional food industry.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 전기설비
• /
• pp.31-32
• /
• 2006

Pohang accelerator Laboratory is from 1994 analyzed electric power amount used for about 10 years. It is one of equipment that consume electric power of greate electric power to single test equipment. Accelerator Laboratory institute investigates the consumption rate of energy that is spent to each building could divide by linear accelerator and save ring and analyzed about the equipment utilization rate and average electric power. Countermeasure that this treatise can forecast power loss of electric power by equipment through analysis of electric power amount used and heighten the utilization rate of equipment wishes to do comparative analysis.

• 한국환경과학회지
• /
• 제20권6호
• /
• pp.775-782
• /
• 2011

The purpose of this study was to evaluate the basic unit of irrigation water on golf courses in Jeju Island. The amounts of rainwater and groundwater used on 20 golf courses have been monitored for this study. The characteristics of rainwater and groundwater from the selected 20 golf courses were analyzed based on the existing data that had been collected for three consecutive years from 2006 to 2009. The range of monthly irrigation water (groundwater + rainwater) used was about $13,200\sim55,600\;m^3$/month, with average of $36,600\;m^3$/month. In the respects of the amount of annual water used, groundwater was recorded as $163,500\;m^3$/year, and rainwater was recorded as $275,400\;m^3$/year. Thus, the total annual irrigation water used was approximately $439,000\;m^3$/year. The correlation (R2) between golf course lot size and average amount of monthly irrigation water used was 0.65, and the monthly basic unit per golf course area ($1,000\;m^2$) was calculated as $60\;m^3$.

• 한국화재소방학회논문지
• /
• 제31권4호
• /
• pp.26-34
• /
• 2017

본 논문은 거실제연설비의 인접구역 상호제연방식의 성능 확인 및 향상을 위한 논문으로써 국가화재안전기준(NFSC)과 NFPA 연기제어에 관한 규정을 비교 분석하였다. 분석방법은 화재 시뮬레이션(FDS)을 통해 모델링을 실시하여, 급기량 변화, 제연경계의 폭, 화재실내 가연물 변화, 유입공기의 풍속차이를 통해 이루어졌다. 그 결과 청결층 확보를 위해 급기량을 배출량 이하로 하였을때 화재실에서의 청결층 확보에 유리한 것으로 나타났으나 급기실에서는 급기량을 배출량 이상으로 하였을때 청결층 확보에 유리한 것으로 나타났으며, 제연경계의 폭이 길어질수록 성능 확보에 유리한 것으로 나타났다. 또한 가연물의 종류에 따라 급기량과 배출량을 고려해야 하며, 공기유입구 풍속은 급기량을 감소시킴과 동시에 공기유입구 풍속을 낮게 하므로써 화재실의 청결층 확보에 유리한 것으로 나타났다.

• 대한치과보철학회지
• /
• 제39권1호
• /
• pp.96-104
• /
• 2001

This study was performed to compare the abrasiveness and wear resistance of several restorative materials occluding enamel and gold alloy. Intact labial surface of bovine incisor and the plain portion of type III gold alloy were used as plate specimens, and pin specimens were fabricated using $Artglass^{(R)},\;Targis^{(R)},\;Sculpture^{(R)}$. After two-body wear test using pin and plate model, amount of vertical height loss of plate and pin specimens were measured and statically analyzed. The amount of vertical height loss of plate specimens against pin specimens were measured by a roughness measurement instrument. The amount of vertical height loss of pin specimens against plate specimens were measured by an image analyzing program after taking scanning electron micrographs of pin specimens. The results were as following. 1. As fir the amount of enamel wear. gold group showed least amount of wear. There was no significant difference among Sculpture, Targis and Artglass groups(p<0.05). 2. As for the amount of gold wear Sculpture group standed first and Targis and Artglass group followed respectively, and there was significant difference between Sculpture and Artglass groups(p<0.05). 3. As for the amount of restorative materials against enamel, Artglass group showed greatest, and there was no significant difference among gold. Sculpture, Targis groups(p<0.05). 4. As for the amount of restorative materials against gold, Artglass group standed first and Targis and Sculpture group followed respectively, and there was significant difference among each groups(p<0.05).

• 한국세라믹학회지
• /
• 제20권1호
• /
• pp.63-69
• /
• 1983

It is know that $Si_3-N_4$ bonded SiC has almost all the valuable properties needed for the high temperature material and thus has bery wide range of applicability. Si powder and two different sized SiC powder were used as the raw mateials. Specimens were prepared by heating the green compact mode of the raw materials with polyvinyl alcohol binder in the nitrogen atmosphere. The bond-ing of SiC particles is brought about with the formation of reaction bonded silicon nitride phase between the particles he influences of the variation of the relative amounts of the raw materials and the amount of the organic binder on the density and the bend strength of the specimens were investigated. It was shown that the calculation of the amount of the nitridation of Si is somewhat complicated matter since some portion of the organic binder reacts with the Si during the firing process. Fixing the Si amount to 20w/o the distributions of the size of the SiC particles that gives the maximum density and the maximum strnegth were obtained through experiments. It was observed that the two distributions were not equal to each other. As the amount of Si increased the amount of Si reacted with nitrogen and the strength increased. The fracture mode was intergranular for the most part and the transgranular fracture was scarcely observed.

• Korean Chemical Engineering Research
• /
• 제53권2호
• /
• pp.181-192
• /
• 2015

본 연구는 Liquid Crystal Display (LCD) 세척 후 발생하는 Propylene Glycol Monomethyl Ether Acetate (PGMEA)폐액 재활용을 위한 2기 증류탑을 사용하는 공정의 최적 조건을 산출하였다. 공정조건 최적화 기법으로 다중회귀분석을 이용하여 1차 증류 시 Bottom 온도(BTM 온도), Reflux 량, Feed 량 및 Feed 온도에 따라 PGMEA 함량에 대한 최적 조건과 2차 증류 시 BTM 온도, Reflux 량, Feed 량에 따른 PGMEA 함량에 대한 최적 조건과 공정인자를 산출하였다. 1차 증류탑의 공정인자 중 Reflux 량, Feed 온도 및 Feed 량이 중요한 인자로 산출되었다. 본 연구의 공정조건 범위에서는 BTM 온도범위가 PGMEA함량에 크게 영향을 주지 못하였다. 따라서 최적 공정 조건은 Feed 량 $5,700{\ell}$, Reflux 량 $2,500{\ell}$, BTM 온도 $165^{\circ}C$ 및 Feed 온도 $130^{\circ}C$이며 이때 예측된 PGMEA 함량은 92.12~94.62%로 산출되었다. 2차 증류탑에서는 Reflux 량이 함량에 많은 영향을 미치고 있으며, Feed 량과 BTM 온도도 영향을 미치는 인자로 산출되었다. 다중공선성(Multicollinearity)이 Reflux 량과 BTM 온도 간에 강한 양의 상관관계가 있어, 두 인자 중 다중회귀식에 영향이 지배적인 인자 하나를 선택하였으며, 최적조건은 BTM 온도 $199^{\circ}C$ 기준에서 최적 공정 조건은 Feed 량 $4,275{\ell}$ 및 Reflux 량 $6,200{\ell}$이며, 이때 예측 PGMEA 함량은 99.0~99.5%로 산출되었다.

• 융합정보논문지
• /
• 제10권5호
• /
• pp.92-100
• /
• 2020

본 연구의 목적은 ICT 산업의 수출중량과 수입중량, 수출금액, 수입금액, 무역수지와의 관계를 분석하는 것이고 관세청 무역통계에서 자료를 수집하였다. 분석기간은 2000년부터 2018년까지 총 19년간 연간자료를 사용하였다. 변동률 분석은 무역수지, 수출금액, 수입금액, 수입중량, 수출중량 순으로 크게 나타났으며 상승률 분석은 무역수지가 919%로 가장 높게 나타났다. 상관분석에서 무역수지는 수출액(0.95)과 가장 높은 상관계수를 보여주었다. 회귀분석결과 종속변수인 무역수지에 대해 수출액은 Coefficient 2.37로 양(+)의 방향으로 나타났고 각 변수들은 상호 독립적으로 변동하고 있다. 지난 2000년 이후 한국 ICT 산업의 무역수지가 한국 총 무역수지의 84%를 주도해 왔다. 향후 한국 수출과 경제발전을 위해 한국 ICT 산업을 더욱 발전시켜야 하고 무역수지 증가를 위해 수출액을 더욱 증가시켜야 할 것이다. 다음 논문에서는 ICT 산업을 세분화하여 구체적으로 발전 가능한 분야를 찾아보아야 한다.

• 한국기계가공학회지
• /
• 제14권5호
• /
• pp.22-27
• /
• 2015

Processing of low toughness graphite material requires high-speed machine tools and DLC coating. In this study, results of investigation of the tool wear and machining properties of the DLC coating according to the thickness, and the machining time of the tool used for the machining of graphite electrodes, were as follows. 1. DLC coating thickness shows a larger wear amount of the tool center in accordance with thickness; the wear amount of the tool increases in proportion to the machining time. 2. The difference between the amount of wear depending on the processing time shows edge portions larger than the tool wear amount in the center. This amount of wear of the tool edge is formed since the rotating torque is in contact with the graphite material surface significantly more than the central portion. 3. The thicker the DLC coating, the more the coating tool eliminated of the coating area by the interface between the cemented carbide tool being coated with an increased friction of the graphite material and the DLC coating area.

• 한국분말재료학회지
• /
• 제9권5호
• /
• pp.315-321
• /
• 2002

Pure tantalum powder has been produced by combining Na as a reducing agent, $K_2TaF_{7}$ as feed material, KCl and KF as a diluent in a stainless steel(SUS) bomb, using the method of metallothermic reduction. The present study investigated the effect of the amount of the diluent and reaction temperature on the characteristics of tantalum powder in the production process. The temperature applied in this study $850^{\circ}C$ and the amount of the additional reductant from +5% of the theoretical amount used for the reduction of the entire $K_2TaF_{7}$. The results showed that as the amount of the diluent increased, the reaction temperature became lower because the diluent prevented a temperature rise. Also, according to the mixture ratio of the feed materials and the diluent changed from 1 : 0.25 to 1 : 2, the particle size decreased from $5\mutextrm{m}$ to $1\mutextrm{m}$ and a particle size distribution which is below 325 mesh in fined powder increases from 71% to 83%. The average size of Tantalum powder, $2-4\mutextrm{m}$, was close to that of the commercial powders($2-5\mutextrm{m}$). Also under this condition, impurities contained in the powder were within the range allowed for the commercial Ta powders.