• Korean Journal of Applied Biomechanics
• /
• v.19 no.3
• /
• pp.603-610
• /
• 2009

The purpose of this study was to determine how spandex pants affect impact force and muscle activities in the lower extremity. Seven pairs of surface electrodes were attached to the right-hand side of the body. Paired t-test was performed to test if significant difference exist between two conditions(p< .05). The average IEMG activities in the TA, BF, and GM during the landing phase reduced significantly with spandex pants compared to regular pants. All peak IEMG activities except the RF in wearing spandex pants group were significantly greater than the corresponding values in wearing regular pants one. The greater muscle activity recorded in wearing spandex pants can be attributed to the greater motor unit recruitment needed to decelerate and stabilized their bodies. Impact force and loading rate were not significantly decreased with wearing spandex pants. Since the spandex pants used in this study were not custom-fit based on girth of each participants thigh and shank, compression and elasticity for the pants could not be optimized.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.1250-1264
• /
• 2017

This paper presents the architecture design, implement, experimental validation of a bistatic backscatter wireless communication system in Wi-Fi network. The operating principle is to communicate a tag's data by detecting the power level of the power modulated Wi-Fi packets to be reflected or absorbed by backscatter tag, in interconnecting with Wi-Fi device and Wi-Fi AP. This system is able to provide the identification and sensor data of tag on the internet connectivity without requiring extra device for reading data, because this uses an existing Wi-Fi AP infrastructure. The backscatter tag consists of Wi-Fi energy harvesting part and a backscatter transmitter/a power-detecting receiver part. This tag can operate by harvesting and generating energy from Wi-Fi signal power. Wi-Fi device decodes information of the tag data by recognizing the power level of the backscattered Wi-Fi packets. Wi-Fi device receives the backscattered Wi-Fi packets and generates the tag's data pattern in the time-series of channel state information (CSI) values. We believe that this system can be achieved wireless connectivity for ultra- low-power IoT and wearable device.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.5
• /
• pp.300-305
• /
• 2015

$WO_3$, $SiO_2$, and $TiO_2$ films with hydrophilic property are deposited by rf-magnetron sputtering. Their wettability is strongly depends on the presence or absence of the oxygen plasma etching on the glass substrates. The $TiO_2$ film of 50 nm-thick on the plasma etched glass shows a water contact angle (WCA) below $5^{\circ}$ which means a super-hydrophilic surface. However, WCA values are gradually degraded when the films are exposed under atmosphere, especially $WO_3$. In order to improve hydrophilic property, the degraded films can be again recovered by UV illumination for 10 sec using UV-light and the $TiO_2$ film shows a super-hydrophilic surface about $3^{\circ}$.

• The Plant Pathology Journal
• /
• v.15 no.3
• /
• pp.152-157
• /
• 1999

An antibiotic compound was isolated from the culture of an antagonist against Fusarium oxysporum f. sp. sesami, Bacillus polymyxa strain KB-8, and tested for the control of Fusarium wilt of sesame in greenhouse conditions. Optimum conditions for culturing the antagonist to obtain the maximum antibiotic activity were determined using different culture media, initial medium acidity, and incubation periods for which yeast -malt extract agar with the initial acidity of pH 5 and over 13 days culture were best. Antibiotic substances extracted by methanol had 2 main fractions, KB-8A and KB-8B, in thin layer chromatography (OLC) with Rf values of 0.35 and 0.67 in a solvent system of chloroform : methanol = 7 : 3. The fraction KB-8A wa purified further by XAD-2, silica gel and Sephadex LH-20 column chromatography, and crystalization. Its minimum inhibitory concentrations (MICs) were $12.8\mu\textrm{g}$/ml for F. oxysporum and Alternaria mali, $6.4\mu\textrm{g}$/ml for Colletotrichum gloeosporioides and Rhizoctonia solani, and $3.2\mu\textrm{g}$/ml for Phytophthora capsici. Soil drenching of antibiotic KB-8A in the concentrations of $13.0\mu\textrm{g}$/ml and $26.0\mu\textrm{g}$/ml effectively inhibited the Fusarium wilt of sesame in a greenhouse test, which appeared to be comparable to the fungicide benlate of $6.5\mu\textrm{g}$ a. i./ml.

• Elastomers and Composites
• /
• v.36 no.2
• /
• pp.94-101
• /
• 2001

In this work, the effect of NE plasma treatment generated by radio-frequency was investigated in acid-base surface values, ion adsorption characteristics, and surface free energies of carbon blacks. As the results, it was clearly found that the obvious improvement of the treatment is in the London dispersive component (${\gamma}s^L$) of surface free energy of carbon blacks. Also both electron-acceptor ( ${\gamma}s^+$) and -donor (${\gamma}s^-$) parameters for the specific component (${\gamma}s^{sp}$) were also increased with increasing the treatment time, resulting in increasing the surface functional groups of the carbon blacks studied, together with a consequence of the increases of acidic and basic surface functional groups, ion exchange, zeta potential, and ion mobility.

• Journal of Ginseng Research
• /
• v.41 no.1
• /
• pp.36-42
• /
• 2017

Background: Some differences have been reported in the biotransformation of ginsenosides, probably due to the types of materials used such as ginseng, enzymes, and microorganisms. Moreover, most microorganisms used for transforming ginsenosides do not meet food-grade standards. We investigated the statistical conversion rate of major ginsenosides in ginsenosides model culture during fermentation by lactic acid bacteria (LAB) to estimate possible pathways. Methods: Ginsenosides standard mix was used as a model culture to facilitate clear identification of the metabolic changes. Changes in eight ginsenosides (Rb1, Rb2, Rc, Rd, Re, Rf, Rg1, and Rg2) during fermentation with six strains of LAB were investigated. Results: In most cases, the residual ginsenoside level decreased by 5.9-36.8% compared with the initial ginsenoside level. Ginsenosides Rb1, Rb2, Rc, and Re continuously decreased during fermentation. By contrast, Rd was maintained or slightly increased after 1 d of fermentation. Rg1 and Rg2 reached their lowest values after 1-2 d of fermentation, and then began to increase gradually. The conversion of Rd, Rg1, and Rg2 into smaller deglycosylated forms was more rapid than that of Rd from Rb1, Rb2, and Rc, as well as that of Rg1 and Rg2 from Re during the first 2 d of fermentation with LAB. Conclusion: Ginsenosides Rb1, Rb2, Rc, and Re continuously decreased, whereas ginsenosides Rd, Rg1, and Rg2 increased after 1-2 d of fermentation. This study may provide new insights into the metabolism of ginsenosides and can clarify the metabolic changes in ginsenosides biotransformed by LAB.

• Journal of the Korean Chemical Society
• /
• v.11 no.3
• /
• pp.111-116
• /
• 1967

A new alkaloid named Spirajine(m.p. 182~$184^{\circ}C$ $[{\alpha}]d^{19}+3.4^{\circ}$ in $CHCl_3$, $C_{23}H_{33}NO_3$, colorless prism) was isolated from the leaves of Spiraea Koreana Nakai (Spiraeceae) (Korean name "Chamjopab namu") which grows in the mountaineous area of Korea, by process of Scheme I (yields 0.13%). Another two unidentified alkaloids (not yet crystallized) were separated by the method of thin layer chromatography. (The Rf values of the two unidentified alkaloids were 0.66, 0.77, respectively and Spirajine 0.72) Spirajine were subjected to the structural investigation with the use of ultra violet and infra red spectrophotometry, and opical rotatory dispersion. The alkaloid contains two ketonic carbonyl groups, tertiary hydroxyl group, methyl groups, N-methyl group and both cyclohexane ring and cyclopentane ring.

• Journal of Sensor Science and Technology
• /
• v.9 no.3
• /
• pp.171-176
• /
• 2000

The physical and electrical characteristics of MgO and Pt thin-films on it, deposited by reactive sputtering and rf magnetron sputtering, respectively, were analyzed with annealing temperature and time by four-point probe, SEM and XRD. Under annealing conditions of $1000^{\circ}C$ and 2 hr, MgO thin-film had the properties of improving Pt adhesion to $SiO_2$ and insulation without chemical reaction to Pt thin-film, and the sheet resistivity and the resistivity of Pt thin-film deposited on it were $0.1288\;{\Omega}/{\square}$ and $12.88\;{\mu}{\Omega}{\cdot}cm$, respectively. We made Pt resistance pattern on $SiO_2$/Si substrate by lift-off method and fabricated thin-film type Pt-RTD(resistance thermometer device) for micro thermal sensors by Pt-wire, Pt-paste and SOG(spin-on-glass). In the temperature range of $25{\sim}400^{\circ}C$, the TCR value of fabricated Pt-RTD with thickness of $1.0{\mu}m$ was $3927\;ppm/^{\circ}C$ close to the Pt bulk value. Resistance values were varied linearly within the range of measurement temperature.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1552-1554
• /
• 2004

The modeled resonant frequency and electrical properties of Pb(Zr, Ti)$O_3$ (PZT) film with various thicknesses have been investigated in film bulk acoustic wave resonators (FBARs). PZT films and Pt electrodes were fabricated by rf-magnetron sputtering. Fabrication process of electrodes and PZT were patterned by simple lift-off process and then back side of silicon was etched by 45wt% KOH. The crystal structure of PZT films with 0.5, 1 and 2 ${\mu}m$ thickness was investigated by x-ray deflection (XRD) and scanning electron microscopy (SEM). The dielectric constant and performance characteristics of PZT FBAR strongly depended on the film thickness. The resonant frequency of PZT films decreased with increasing film thickness. These sputtered PZT FBAR with simple lift-off process enable us to fabricate high Q values with resonant frequencies. (0.71 - 1.48 GHz).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.4
• /
• pp.562-566
• /
• 2003

A $\beta$-mannanase of Bacillus sp. was purified by DEAE Sephacel ion exchange column chromatography. The specific activity of the purified enzyme was 17.41 units/mg protein, representing an 84.74-folds purification of the original crude extract. For the separation of two types of hydrolysates by the action of purified $\beta$-mannanase, carbon column chromatography, sephadex G-25 column chromatography and thin layer chromatography were accomplished. Main hydrolysates were D.P value 5 and 7 containing of low D.P values. By the method of FACE (Fluorophore Assisted Carbohydrate Electrophoresis), two types of hydrolysates were identified to homo type.