• 품질경영학회지
• /
• 제27권3호
• /
• pp.94-112
• /
• 1999

It is booming to use computer and information owing to the information society. As software applications have grown, so too has the importance of software quality. Therefore, software quality measurement and evaluation are necessary to satisfy the users who are using computers. The ISO/IEC 9126 defines six quality characteristics and twenty-one subcharacteristics including forty inter quality characteristics. We developed software measurement and evaluation technique using the check list in accordance with the ISO/IEC 9126 in design phase. We applied idea and concept of Total Quality Management in order to evaluate and measure the quality of software. Namely, it is the concept such as "you should do it right the first time." or "you have to build quality in the process." We executed the quantitative evaluation of software, also had shown the distinctive result in order that users and developers can find the errors easily. We evaluated the quality of academic softwares in order to verify developing technique at S college. As a result of the evaluation, this college has found it necessary to maintain the software as soon as possible because academic systems are not adequate for users at this present time.

• 조명전기설비학회논문지
• /
• 제27권6호
• /
• pp.23-30
• /
• 2013

This paper shows the method of winding connection and the balance of three phase of dual inverter systems used for offshore wind power generator. In order to satisfy low cost manufacturing of large scaled wind generator, the number of slot per pole per phase should be reduced. For this reason, in this research, the number is selected as '1' which is the minimum number that stator can have. Based on the prototype machine, three types of machine for the analysis are selected, and various performances especially in terms of electrically balanced condition are also investigated. Moreover, in this paper, new inductance modeling of dual 3-phase considering cross-coupling between two inverter systems is proposed. The several inductances such as mutual-, synchronous inductances are studied. By using FEA, based on calculated the flux linkage of d and q-axis, the validity of the proposed inductance modeling is confirmed.

• Bulletin of the Korean Chemical Society
• /
• 제21권3호
• /
• pp.310-316
• /
• 2000

Molecular dynamics simulation studies for thermotropic liquid crystalline systems conposed of rodlike molecules with 6 Lennard-Jones interaction sites wre performed in NPT ensemble. Within the range of temperature studied, the system exhibited isotropic and smectic phase. For the characterization of the smectic phase, we examined the structure of the liquid crystalline phase via the radial distribution function, its longitudinal and transverse components to the director, and other orientational correlation function, its longitudinal and transverse components to the director, and other orientational correlation functions. In the smectic A phase, our results showed a large anisotropy in translational motion (i.e.,$D_⊥ >> D_∥$), and the decay of the collective orientational correlation function of rank two became slower than that of the single particle orientational correlation function of rank one. Comments on the spontaneous growth of orientational order directly from the isotropic phase are given.

• 산업기술연구
• /
• 제11권
• /
• pp.3-16
• /
• 1991

The lattice-fluid theory are adopted for modeling the phese equilibria in supercritical fluids, In order to investigate effects of the nonrandom distribution of holes in mixtures on the phase equilibria, the equation of state and the chemical potential of the binary miture are formulated with taking into account nonrandomness of holes distributions in the fluid mixture. The relations of phase equilibria formulated in this work are tested through predictions of solubility of heavy solids in supercritical fluids and predictions of high pressure phase equilibria of binary mixtures. Results obtained exhibit that the lattice fluid model with assumptions of nonrandomness of hole distributions is successful in quantatively mideling the phase equilibria of mixtures of molecules of dissimilar sizes, specifically solids-supercritical fluid mixtures.

• Journal of Mechanical Science and Technology
• /
• 제17권7호
• /
• pp.1083-1094
• /
• 2003

This study represents an assessment of the phase-Doppler technique to the measurements of dense droplet laden jet. High-pressure injection fuel sprays have been investigated to evaluate the use of the Phase-Doppler anemometry (PDA) technique. The critical issue is the stability of the phase-Doppler anemometry technique for dense droplet laden jet such as Diesel fuel spray in order to insure the results from the drop size and velocity measurements are repeatable, consistent, and physically realistic because the validation rate of experimental data is very low due to the thick optical density. The effect of shift frequency is minor, however, the photomultiplier tube (PMT) voltage setting is very sensitive to the data acquisition and noise in dense droplet laden jet. The optimum PMT voltage and shift frequency should be chosen so that the data such as volume flux and drop diameter do not change rapidly.

• 전기학회논문지
• /
• 제62권2호
• /
• pp.184-189
• /
• 2013

Compared to a multiphase SRM, a single-phase SRM has some advantages, such as lower number of switches and power converter size, which leads to gradually increasing in the household appliances and industrial applications. But the torque dead zone is existed in the single-phase SRM which decreases the starting capability of the motor and increases the torque ripple. In order to solve the aforementioned problems, a single-phase hybrid SRM with commercial ferrite permanent magnet is proposed in this paper. Basic design principle for the proposed structure is described. To verify the proposed structure, FEM is employed to get the characteristics of the proposed structure. Based on the analysis, a prototype is designed and manufactured. And, the experimental system is also constructed. The validity of the proposed structure is verified by the experimental results.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.196-199
• /
• 1999

The coexistence of the superconductivity and magnetism in the Ho1-xDyxNi2B2C is studied by using Ginzburg-Landau theory. This material violates the standard do Gennes scaling showing the coexistence and complex interplay of superconducting and magnetic order yielding an anomalous phase diagram. We propose a phenomenological model which includes two magnetic and two superconducting order parameters accounting for the multi-band structure of this material. We describe the magnetic fluctuations and order and demonstrate that they lead to anomalous behavior of the upper critical field. The doping dependence of Tc in Ho1-xDyxNi2B2C showing a reentrance behavior are analyzed yielding a very good agreement with experimental data.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.75-80
• /
• 2005

The present work was undertaken to numerically analyze the defrosting phenomena of windshield glass. In order to analysis the phase change from frost to water on windshield glass by discharging hot air from a defroster nozzle, the flow and the temperature field of the cabin interior, the heat transfer through the windshield glass, and the phase change of frost should be solve simultaneously. In the present work, the flow field was obtained by solving 3-D incompressible Navier-Stokes equations, and the temperature field was computed from the incompressible energy equation. The phase change process was solved by the enthalpy method. For the code validation, the temperature and the phase change of the driven cavity were calculated. The calculation showed a good agreement with other numerical results. Then, the present code was applied to the defrosting problem of a real automobile, and a good agreement with the experimental data was also obtained.

• 제어로봇시스템학회논문지
• /
• 제12권8호
• /
• pp.739-745
• /
• 2006

This paper presents performance improvement of the INS velocity-adided GPS carier tracking loop. To this end, INS velocity-aided GPS carrier tracking loop was modeled as a feedfoward and a feedback loop system. In the phase tracking loop, it was shown that the tracking error caused by the dynamic motion of the vehicle can be compensated with the aiding of the INS information irrespective of the loop order and bandwidth. However, the signal trcking error increases as the INS error increases. It was also shown that in order to remove the tracking error caused by INS bias error, more than or equal to 2nd order PLL should be used. Experiments were carried out and the experimental results were compared with the analysis results.

• 대한전자공학회논문지TC
• /
• 제40권9호
• /
• pp.392-397
• /
• 2003

Lange 커플러를 이용한 반사구조 위상변위기는 광대역에서 위상변이를 얻는데 사용되는 회로이다. 이런 5-비트 반사구조에서 33.75°는 대개 11.25°와 22.5°를 동시에 "on"시켜서 얻는 방법이 사용되어져 왔다. 본 논문은 33.75° 위상특성을 개선하기 위하여 GaAs PM 다이오드와 리액티브 부하로 구성된 별도의 회로를 제안하였으며 MMIC로 구현하였다. 2-6 GHz에서 제안된 회로는 기 발표 논문에 비하여 33.75°를 기준으로 할 때 평균 4.7° 개선된 특성을 얻었다. 기존 회로와 비교할 때 삽입손실 및 반사손실은 거의 변화가 없었다.