• 대한전자공학회논문지
• /
• 제23권5호
• /
• pp.605-615
• /
• 1986

The phase-locked loop(PLL) is a communication receiver which operates as a coherent detector by continuously correcting the phase error. In this paper analysis for the Phase-error behavior of analog phase-locked loop (APLL) in the presence of additive white gaussian noise has been done theoretically and experimentally. A close form solution of the first-order loop is obtained and approximate solutions are derived for the second-order loops with RC, leadlag and perfect integrator filters. The perdormance of APLL's and their characteristics are also thoroughly investigated through experiments. In order to analyze the effect of the stochastic nature on nonlinear dynamics characteristics of the second order APLL, the phase error distribution and its variance have been obtained by using the Fokker-Planck equation. Theoretical results agree closely with those of experiment.

• 전자공학회논문지A
• /
• 제31A권6호
• /
• pp.1-8
• /
• 1994

In this paper, in order to apply the idea MDPSK to TCM, we use signal set expansion and set partition by phase differences. Through this we propose the trellis-coded MDPSK. And the Viterbi decoder containing branch metrics of the squared Euclidean distance of the Lth order phase difference as well as the first order phase difference is introduced in order to improve the bit error rate(BER) in the differential detection of the trellis-coded MDPSK. The proposed Viterbi decoder is conceptually same to the sliding multiple symbol dection method which uses the branch metric with the first and Lth order phase differences. We investigate the performance of the uncoded DQPSK and the trallis-coded D8PSK in additive white Gaussian noise (AWGN) through the Monte Carlo simulation under the two cases of using and not using the Lth order phase difference metric. The study shows that trellis-coded 8DPSK is an attractive scheme for power and bandlimited systems while also improving the BER performance when the Viterbi decoder is employed to the Lth order phase order difference metric. This performance improvement has been obtained without sacrificing the bandwidth or the power efficiency.

• Journal of the Optical Society of Korea
• /
• 제17권5호
• /
• pp.415-422
• /
• 2013

White-light phase-shifting interferometry (WLPSI) is widely recognized as a standard method to measure shapes with high resolution over a long distance. In practical applications, WLPSI, however, is associated with some degree of ambiguity of its phase, which occurs due to a phase delay, which is the offset between the phase of the fringes and the fringe envelope peak position. In this paper, a new algorithm is proposed for the determination of a fringe order suitable for samples in which the phase delay mainly occurs due to noise, diffraction and a steep angle. The concepts of the decouple factor and the connectivity are introduced and a method for calculating the decouple factor and the connectivity is developed. With the phase-unwrapping procedure which considers these values, it is demonstrated that our algorithm determines the correct fringe order. To verify the performance of the algorithm, a simulation was performed with the virtual step height under noise. Some specimens such as step height standard and a column spacer with a steep angle are also measured with a Mirau interference microscope, after which the algorithm is shown to be effective and robust.

• 대한전기학회논문지
• /
• 제41권8호
• /
• pp.902-913
• /
• 1992

There have been several control schemes for the single input systems with unmeasurable state variables using variable structure control(VSC) theory. In the previous VSC, the systems must be represented in phase canonical form and the complete measurements for each state variable must be assumed. In order to eliminate these restrictions several VSC methods were proposed. And especially for the systems in phase canonical form with unmeasurable state variables, the reduced order switching function algorithm was proposed. But this method has many drawbacks and can not be used in the case of general form (not phase canonical form) dynamic system. Therefore this paper propose new construction method of switching fuction for the systems in phase canonical form, which reduce the restriction of reduced order switching function algorithm. And this algorithm can be realized for any state representation and adopted in the systems where not all states are available for switching function synthesis or control.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.679-681
• /
• 2014

본 논문에서는 M-ary APSK 변조 방식을 사용하는 통신 시스템의 위상잡음에 의한 영향을 분석한다. 고차 변조 방식의 신호 성상도를 고려하여 위상 잡음에 의한 성능을 모의 분석한다. PSK 저차 변조 방식에 의한 성능 분석도 수행하며, 분석 결과는 해석적 모델의 성능 열화 결과와 비교 평가한다. 비교 평가된 분석 모델을 통하여 고차 변조 방식을 사용하는 통신 시스템의 위상잡음에 의한 열화 정도를 제시한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 추계종합학술대회
• /
• pp.180-185
• /
• 2000

본 논문에서는 주파수합성기에서 가장 큰 노이즈 Source인 VCO 및 각 단에서 발생하는 Phase Noise의 offset 주파수에 따른 변화를 예측하기위해 2303,15MHz의 주파수합성기를 설계하고 Lascari의 방법을 이용해 분석하였다. 그리고 VCO에서 발생되는 여러 중첩 형태로 된 Phase Noise중 저주파대역에서 문제가 되는 1/f Noise룰 3차 System에서 분석하였다. 3차 System에서는 해석이 복잡하므로 수학적인 분석을 통하여 1/f Noise를 예측한다는 것이 어렵지만 pseudo-damping factor의 도입으로 3차 시스템에서의 1/f Noise variance의 해석이 용이하도록 시도하였고 이를 2차 시스템과 비교하여 분석하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권6호
• /
• pp.297-300
• /
• 2012

Lead-free (1-x)$(Na_{0.5}K_{0.5})NbO_3-xLiNbO_3$, i.e., NKN-LNx (x=0.0, 0.1, 0.2, 0.3, 0.4 mol) was prepared using the conventional solid state reaction method. The effects of LN mixing on the ferroelectric properties of NKN-LNx ceramics were studied using a dielectric constant and P-E (Polarization-electric field) measurements. Ferroelectricity was observed in the composition for x approximately varying between 0.0 and 0.4. Minimum remanent polarization $2P_r=5C/cm^2$ was achieved in the composition for x = 0.2. The ferroelectric phase transition temperature $T_C$ increased with increasing LN content. The ferroelectric phase transition of NKN-LNx ($x{\geq}0.1$) is a second-order phase transition, and that of NKN-LNx ($x{\leq}0.2$) is a first-order phase transition. These results indicate that the ferroelectric phase transition temperature of NKN-LNx change from that of second-order to weak first-order phase transition according to the LN content.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.622-624
• /
• 2015

As uncertain factors are latent in a construction project by nature, a change order occurs frequently. The occurrence of change orders in construction projects conducted during construction phase is known to cause unexpected negative impacts such as cost overrun, schedule delay, quality problem, and claims in the post-process. Thus, an efficient management method is necessary to prevent and minimize change orders during construction phase when they occur frequently. This paper analyzed the causes of change orders and the impact factors that occur during the construction phase of a construction project and suggested a direction for change order database building.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1317-1320
• /
• 2014

In case of using three-phase induction motor in three-phase power system, if he deficiency happens in phase among three-phase, the motor will drive in an open phase state. As to the motor, the continuing operation is possible then, but the phenomenon that the power supply stops happening by the result of the overload electricity order on the healthy phase of two phases with a damage and activating the circuit breaker. Consequently, in order to overcome this problem in treatise accordingly. I propose an uninterruptible power supply which is able to prevent that the over current on the health phase through the restoration that in case happening open phase on the power line when driving the motor. Also, it is possible to supply power consecutively without interruption of electric power and we proved the performance and reliability through an experiment.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2354-2363
• /
• 2018

This paper proposed a novel double closed control strategy for single-phase voltage source pulse width modulation (PWM) rectifier based on active disturbance rejection control (ADRC) and dq current decoupling control. First, the mathematical model of the single-phase PWM rectifier in the d-q axis synchronous rotating reference frame is established by constructing a virtual component using a second-order generalized integrator (SOGI). Then, the mathematical model is simplified according to the active power conservation, and the first-order equation of single-phase PWM rectifier voltage outer loop is acquired. A linear auto-disturbance rejection controller is used to design the voltage outer loop according to the first-order equation. Finally, the proposed control strategy and the traditional PI control are compared and verified by simulation and physical experiments. Both simulation and experimental results confirm that the proposed control strategy has excellent dynamic performance and strong rejection ability to disturbances.