• Title/Summary/Keyword: the Phase of Order

Search Result 6,122, Processing Time 0.035 seconds

Random Noise Effect Upon 2nd Order Analog Phase-Locked Loop (Random Noise가 2차 Analog Phase-Locked Loop에 미치는 영향)

  • Kang, Jeoung Soo;Rhee, Man Young
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.23 no.5
    • /
    • pp.605-615
    • /
    • 1986
  • The phase-locked loop(PLL) is a communication receiver which operates as a coherent detector by continuously correcting the phase error. In this paper analysis for the Phase-error behavior of analog phase-locked loop (APLL) in the presence of additive white gaussian noise has been done theoretically and experimentally. A close form solution of the first-order loop is obtained and approximate solutions are derived for the second-order loops with RC, leadlag and perfect integrator filters. The perdormance of APLL's and their characteristics are also thoroughly investigated through experiments. In order to analyze the effect of the stochastic nature on nonlinear dynamics characteristics of the second order APLL, the phase error distribution and its variance have been obtained by using the Fokker-Planck equation. Theoretical results agree closely with those of experiment.

  • PDF

Trellis-coded MDPSK with Sliding Multiple Symbol Detection (슬라이딩(Sliding) 다중 심벌 간파를 이용한 드렐리스 부호화된 MDPSK)

  • 박이홍;전찬우;박성경;김종일;강창언
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.31A no.6
    • /
    • pp.1-8
    • /
    • 1994
  • In this paper, in order to apply the idea MDPSK to TCM, we use signal set expansion and set partition by phase differences. Through this we propose the trellis-coded MDPSK. And the Viterbi decoder containing branch metrics of the squared Euclidean distance of the Lth order phase difference as well as the first order phase difference is introduced in order to improve the bit error rate(BER) in the differential detection of the trellis-coded MDPSK. The proposed Viterbi decoder is conceptually same to the sliding multiple symbol dection method which uses the branch metric with the first and Lth order phase differences. We investigate the performance of the uncoded DQPSK and the trallis-coded D8PSK in additive white Gaussian noise (AWGN) through the Monte Carlo simulation under the two cases of using and not using the Lth order phase difference metric. The study shows that trellis-coded 8DPSK is an attractive scheme for power and bandlimited systems while also improving the BER performance when the Viterbi decoder is employed to the Lth order phase order difference metric. This performance improvement has been obtained without sacrificing the bandwidth or the power efficiency.

  • PDF

Fringe-Order Determination Method in White-Light Phase-Shifting Interferometry for the Compensation of the Phase Delay and the Suppression of Excessive Phase Unwrapping

  • Kim, SeongRyong;Kim, JungHwan;Pahk, HeuiJae
    • Journal of the Optical Society of Korea
    • /
    • v.17 no.5
    • /
    • pp.415-422
    • /
    • 2013
  • White-light phase-shifting interferometry (WLPSI) is widely recognized as a standard method to measure shapes with high resolution over a long distance. In practical applications, WLPSI, however, is associated with some degree of ambiguity of its phase, which occurs due to a phase delay, which is the offset between the phase of the fringes and the fringe envelope peak position. In this paper, a new algorithm is proposed for the determination of a fringe order suitable for samples in which the phase delay mainly occurs due to noise, diffraction and a steep angle. The concepts of the decouple factor and the connectivity are introduced and a method for calculating the decouple factor and the connectivity is developed. With the phase-unwrapping procedure which considers these values, it is demonstrated that our algorithm determines the correct fringe order. To verify the performance of the algorithm, a simulation was performed with the virtual step height under noise. Some specimens such as step height standard and a column spacer with a steep angle are also measured with a Mirau interference microscope, after which the algorithm is shown to be effective and robust.

The Design of Variable Structure Controller for the System in Phase Canonical Form with Incomplete State Measurements (비 측정 상태변수를 갖는 위상 표준형계통에 대한 가변구조 제어기의 설계)

  • 박귀태;최중경
    • The Transactions of the Korean Institute of Electrical Engineers
    • /
    • v.41 no.8
    • /
    • pp.902-913
    • /
    • 1992
  • There have been several control schemes for the single input systems with unmeasurable state variables using variable structure control(VSC) theory. In the previous VSC, the systems must be represented in phase canonical form and the complete measurements for each state variable must be assumed. In order to eliminate these restrictions several VSC methods were proposed. And especially for the systems in phase canonical form with unmeasurable state variables, the reduced order switching function algorithm was proposed. But this method has many drawbacks and can not be used in the case of general form (not phase canonical form) dynamic system. Therefore this paper propose new construction method of switching fuction for the systems in phase canonical form, which reduce the restriction of reduced order switching function algorithm. And this algorithm can be realized for any state representation and adopted in the systems where not all states are available for switching function synthesis or control.

  • PDF

Performance Analysis of M-ary APSK Modulation Signal due to Phase Noise (위상잡음에 의한 M-ary APSK 변조신호의 성능 분석)

  • Kim, Young-wan;Ji, Sek-geon
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2014.05a
    • /
    • pp.679-681
    • /
    • 2014
  • The performance of M-ary APSK modulation system due to phase noise are analyzed in this paper. The effects for phase noise in the higher order modulation are simulated by using constellation of the higher order modulation signals. the simulated results are verified by comparing with the analytic results for lower order PSK modulation signals. Based on the evaluation of simulation method, the phase noise effects for higher order APSK modulation signals are suggested in this paper.

  • PDF

The Phase Noise Prediction and 1/f Noise Modeling of Frequency Synthesizer (주파수합성기의 Phase Noise 예측 및 1/f Noise Modeling)

  • 김형도;성태경;조형래
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2000.10a
    • /
    • pp.180-185
    • /
    • 2000
  • In this paper, we designed 2303.15MHz Sequency synthesizer for the purpose of the phase noise prediction. For the modeling of phase noise Oersted in the designed system through inooducing the noise-modeling method suggested by Lascari we analyzied a variation of phase noise as according as that of offest frequency. Especially, for the third-order system of the PLL among some kinds of phase noise generated from VCO we analyzed the aspect of 1/f-noise appearing troubles in the low frequency band. Since it is difficult to analyze mathematically 1/f-noise in the third-order system of the PLL, introducing the concept of pseudo-damping factor has made an ease of the access of the 1/f-noise variance. we showed a numerical formula of 1/f-noise variance in the third-order system of the PLL which is compared with that of 1/f-noise variance in the second-order system of the PLL

  • PDF

Ferroelectric Phase Transition of Lead Free (1-x)(Na0.5K0.5)NbO3-xLiNbO3 Ceramics

  • Park, Jong-Ho;Park, Hui-Jin;Choi, Byung-Chun
    • Transactions on Electrical and Electronic Materials
    • /
    • v.13 no.6
    • /
    • pp.297-300
    • /
    • 2012
  • Lead-free (1-x)$(Na_{0.5}K_{0.5})NbO_3-xLiNbO_3$, i.e., NKN-LNx (x=0.0, 0.1, 0.2, 0.3, 0.4 mol) was prepared using the conventional solid state reaction method. The effects of LN mixing on the ferroelectric properties of NKN-LNx ceramics were studied using a dielectric constant and P-E (Polarization-electric field) measurements. Ferroelectricity was observed in the composition for x approximately varying between 0.0 and 0.4. Minimum remanent polarization $2P_r=5C/cm^2$ was achieved in the composition for x = 0.2. The ferroelectric phase transition temperature $T_C$ increased with increasing LN content. The ferroelectric phase transition of NKN-LNx ($x{\geq}0.1$) is a second-order phase transition, and that of NKN-LNx ($x{\leq}0.2$) is a first-order phase transition. These results indicate that the ferroelectric phase transition temperature of NKN-LNx change from that of second-order to weak first-order phase transition according to the LN content.

Establishment of Change Order Database for Reducing Change Order in Construction Phase

  • Shin, Hyun-Kyung;Cha, Yongwon;Han, Sangwon;Hyun, Chang-Taek
    • International conference on construction engineering and project management
    • /
    • 2015.10a
    • /
    • pp.622-624
    • /
    • 2015
  • As uncertain factors are latent in a construction project by nature, a change order occurs frequently. The occurrence of change orders in construction projects conducted during construction phase is known to cause unexpected negative impacts such as cost overrun, schedule delay, quality problem, and claims in the post-process. Thus, an efficient management method is necessary to prevent and minimize change orders during construction phase when they occur frequently. This paper analyzed the causes of change orders and the impact factors that occur during the construction phase of a construction project and suggested a direction for change order database building.

  • PDF

A Study on the Uninterruptible Power Supply on the Open Phase of Three-phase Motor (3상 전동기 결상시 무정전 전원공급장치에 대한 연구)

  • Shin, Hyr-Young;Choi, Hong-Kyoo
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.63 no.9
    • /
    • pp.1317-1320
    • /
    • 2014
  • In case of using three-phase induction motor in three-phase power system, if he deficiency happens in phase among three-phase, the motor will drive in an open phase state. As to the motor, the continuing operation is possible then, but the phenomenon that the power supply stops happening by the result of the overload electricity order on the healthy phase of two phases with a damage and activating the circuit breaker. Consequently, in order to overcome this problem in treatise accordingly. I propose an uninterruptible power supply which is able to prevent that the over current on the health phase through the restoration that in case happening open phase on the power line when driving the motor. Also, it is possible to supply power consecutively without interruption of electric power and we proved the performance and reliability through an experiment.

Active Disturbance Rejection Control for Single-Phase PWM Rectifier with Current Decoupling Control

  • Yan, Ruitao;Wang, Ping
    • Journal of Electrical Engineering and Technology
    • /
    • v.13 no.6
    • /
    • pp.2354-2363
    • /
    • 2018
  • This paper proposed a novel double closed control strategy for single-phase voltage source pulse width modulation (PWM) rectifier based on active disturbance rejection control (ADRC) and dq current decoupling control. First, the mathematical model of the single-phase PWM rectifier in the d-q axis synchronous rotating reference frame is established by constructing a virtual component using a second-order generalized integrator (SOGI). Then, the mathematical model is simplified according to the active power conservation, and the first-order equation of single-phase PWM rectifier voltage outer loop is acquired. A linear auto-disturbance rejection controller is used to design the voltage outer loop according to the first-order equation. Finally, the proposed control strategy and the traditional PI control are compared and verified by simulation and physical experiments. Both simulation and experimental results confirm that the proposed control strategy has excellent dynamic performance and strong rejection ability to disturbances.