• Korean Institute of Interior Design Journal
• /
• v.13 no.1
• /
• pp.70-80
• /
• 2004

The purpose of this study is to analyze the interior color characteristics of elderly housing facilities in U. S. A. For this purpose, a field survey was conducted between July 23 and July 31, 2003, visiting 10 elderly housing facilities in Contra Costa County, California. A three step analysis of the facilities involved. First, floor, walls, ceilings, base boards and doors in common spaces were examined for the color scheme using the "Pantone for Fashion and Home Color Guide" for each room. Measured Pantone numbers were converted to RGB color using "Chooser 3.0 of Pantone, Inc." Finally, the conversions were recorded as Munsell numbers. The results are as follows: First, the colors chosen for American elderly housing are high value and low chromatic colors. In many facilities, analogue colors such as BG, B, BP and Y, YR R, RP are used. Second, the colors of ceiling and wall are mainly very bright and low chromatic colors. The colors of floor are undertaking an Important role by generating major atmosphere in the America elderly housing. Third, the colors used for elderly housing are found inter-related. For example, the main color in the lobby is also used from corridor to stair and used again from lounge to dinning room as a secondary color. Fourth, it is found that accent colors are used at the beginning and end of stair and corridor outskirts in consideration of physical condition of elderly people. Fifth, there is no difference in color selection between elderly housing with low and high rental value. Preferably, more versatile colors are being chosen for elderly housing with the low rental value.he low rental value.

• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.232-238
• /
• 2000

The new collimation testing technique of a white light beam using vernier Moire fringes of two line or circular gratings with different pitches is presented. We can visually measure the defocusing ($\Deltaf$), the divergence angle ($\theta$), and the longitudinal chromatic aberration $(L_{ch})$ of a collimating lens by using the technique. For example, we obtained $\Deltaf$= 21.9 mm and $\theta=0.0038^{\circ}$ for a testing lens with the focallengthf = 120.0 mm and F-number of F/2.4. The longitudinal chromatic aberration $L_{ch}$ of another testing lens withf = 65.0 mm, F/1.6, and the Abbe number V = 64.1 for the incident wavelengths of $\lambda_1=480 nm and \lambda_2=640 nm$ is easily measured by same technique. It is found that the measured value $L_{ch}=1.59mm(\pm0.01mm)$ is well agreed with $L_{ch}=1.58mm(\pm0.01mm)$ obtained by the autofocus method.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.10
• /
• pp.59-70
• /
• 2010

Each pixels become got pixel value for color of only one from among colors because of bayer pattern that light receiving device of image sensor which is used in HHP and digital camera writes only one color. Information of the missing pixels could infer perfect color image from using information of neighbor pixels by using CFA(Color Filter Array). In this paper, we derive relation between the average of the data from the light receiving device of image sensor and each color channel data. And by using this relation, a new efficient edge color fuzzy method for color interpolation is proposed. Also, missing luminance signal channel interpolation was fuzzy interpolation along any edges direction for reducing color noise and interpolating efficiently it. And in this paper, the proposed method has been proved improving average 2.4dB than the conventional method by using PSNR. Also, resolution of the image of the proposed method was similar to the original image by visual images, we has been verified to be decreased a chromatic aberration than image of conventional algorithms with simulation result.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.2
• /
• pp.78-84
• /
• 2012

An in-situ optical monitoring method for real-time process monitoring of electrochemical copper deposition (CED) is presented. Process variables to be controlled in achieving desired process results are numerous in the CED process, and the importance of the chemical bath conditions cannot be overemphasized for a successful process. Conventional monitoring of the chemical solution for CED relies on the pH value of the solution, electrical voltage level for the reduction of metal cations, and gravity measurement by immersing sensors into a plating bath. We propose a nonintrusive optical monitoring technique using three types of optical sensors such as chromatic sensors and UV/VIS spectroscopy sensors as potential candidates as a feasible optical monitoring method. By monitoring the color of the plating solution in the bath, we revealed that optically acquired information is strongly related to the thickness of the deposited copper on the wafers, and that the chromatic information is inversely proportional to the ratio of $Cu$ (111) and {$Cu$ (111)+$Cu$ (200)}, which can used to measure the quality of the chemical solution for electrochemical copper deposition in advanced interconnection technology.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.1
• /
• pp.16-23
• /
• 2009

The three-dimensional ship motion with forward speed was solved by a finite element method in the time domain. A boundary value problem was described in the frame of a fixed-body reference, and the problem was formulated according to Double-Body and Neumann-Kelvin linearizations. Laplace's equation with boundary conditions was solved by a classical finite element method based on the weak formulation. Chebyshev filtering was used to get rid of an unwanted saw-tooth wave and a wave damping zone was adopted to impose a numerical radiation condition. The time marching of the free surface was performed by the 4th order Adams-Bashforth-Moulton method. Wigley I and Wigely III models were considered for numerical validation. The hydrodynamic coefficients and wave exciting forces were validated by a comparison with experimental data and the numerical results of the Wigley I. The effects of the linearization are also discussed. The motion RAO was also checked with a Wigley III model through mono-chromatic and multi-chromatic regular waves.

• Journal of the Korean Society of Tobacco Science
• /
• v.18 no.1
• /
• pp.5-11
• /
• 1996

Field experiment was conducted to get the basic information about the difference in color and plastid pigments at the different stage of harvest of flue-cured tobacco cultivated in paddy field, and compared to upland ones. All tested crops were primed in lots of 3 to 4 at each priming, beginning at the bottom of the plant. Leaf pigments and chromatic values of tobacco leaves were determined in samples collected at weekly intervals, and according to analyses obtained from 4 stalk positions. By the degree of maturity, leaves harvested were separated with visual characters into four classes of immature, mature, ripe and mellow. regardless of stalk position, chlorophyll contents was higher in the order of immature > mature > ripe > mellow, respectively. In fresh leaves, chlorophyll levels was higher with ascending stalk position. chlorophyll a and b in cured leaves were less than 10% of the amount present at harvest, and it was estimated that maturity condition also influenced the rates of degradation of plastid pigments. Fully mature leaves of upland diverted from paddy field showed slightly higher in chlorophyll contents than in those of upland tobacco ones but somewhat lowered in $L^*$ and $b^*$ values, and there was no difference in $a^*$ value.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.2
• /
• pp.67-72
• /
• 2019

This paper proposes a new method for the recognition of resistor color band using a color segmentation in a HSI color model. The proposed method firstly segments a resistor in a chromatic color as a ROI from a background. Secondly, the color bands of the resistor are segmented by vertical projection profile using both the intensity and the saturation differentiation and finally, it recognizes the colors of the segmented color bands using hue, saturation and intensity values. The final results are the value of the resistor and the names of the recognized color. The proposed method is implemented using C language in Raspberry Pi system with a camera module for a real-time image processing. Experiments were conducted by using various resistor images. The results show that the proposed method is successful for the recognition of resistor color band.

• Journal of information and communication convergence engineering
• /
• v.20 no.4
• /
• pp.235-241
• /
• 2022

A dispersion map was proposed to improve the compensation effect of a distorted WDM (wavelength division multiplexed) channel in a dispersion-managed link coupled with optical phase conjugation. The dispersion map is an origin-symmetric structure around the optical phase conjugator in the middle of the transmission path. In addition, the dispersion map has a form in which a constant dispersion accumulation pattern is repeated regularly. Through simulation, we confirmed that the application of the origin-symmetric dispersion map with a repetitively shaped configuration was more effective in compensating for the distorted WDM channel than in the dispersion-managed link with a conventional dispersion map. In addition, we confirmed that the compensation effect could be increased when the cumulative dispersion distribution of the origin-symmetric distribution map had a positive value in the first half section and a negative value in the second half section. Further, we observed that as the number of repeated dispersion accumulation patterns increased, the residual dispersion per span should also be increased.

• Korean Journal of Mathematics
• /
• v.28 no.3
• /
• pp.405-419
• /
• 2020

The zeroth-order general Randić index ⁰R_α(G) of the graph G is defined as ∑_u∈V(G)d(u)^α, where d(u) is the degree of vertex u and α is an arbitrary real number. In this paper, the maximum value of zeroth-order general Randić index on the graphs of order n with a given clique number is presented for any α ≠ 0, 1 and α ∉ (2, 2n-1], where n = |V (G)|. The minimum value of zeroth-order general Randić index on the graphs with a given clique number is also obtained for any α ≠ 0, 1. Furthermore, the corresponding extremal graphs are characterized.

• Culinary science and hospitality research
• /
• v.19 no.3
• /
• pp.142-155
• /
• 2013

This study investigates perilla seed powder substituted for wheat flour in bread recipes with the amounts of 0%(control), 5%, 10%, 15%, and 20%. Perilla seed powder consists of 9.41% of moisture content, 9.14% of crude protein, 1.12% of crude fat, and 2.97% of crude ash. Sedimentation value and pelshenke value have decreased as the perilla content increased. The farinograph measurement result of the bread made with perilla seed powder showed that consistency, water absorption and tolerance index have increased as the perilla content increased. The amylograph measurement result of the bread made with perilla seed powder showed that T, P, H, F, P-H and F-H have decreased as the perilla content increased. Baking loss and specific loaf volume have decreased as the perilla content increased. The chromatic 'L' and 'b' values were reduced as more perilla was added to more pan bread, while the chromatic 'a' value increased. The texture measurement result showed that the hardness of bread have increased as the ingredient contents increased. Their cohesiveness, spinginess, and chewiness have decreased as the ingredient contents increased. Overall preference scores showed a high preference for the bread made with 15% perilla seed powder.