• Journal of the Korean Society of School Health
• /
• v.13 no.1
• /
• pp.85-96
• /
• 2000

This study was conducted to examine the effect of family environment on smoking behavior, smoking knowledge and smoking attitude in primary school students. For the purpose of the study, a questionnaire-based examination was made with 1,476 sixth-grade students in Taegu from November 1st to 30th, 1998. The results of the study are summarized as follows. Out of 22 points for smoking knowledge, the male student group got 12.9 points, and the female student group 13.0 points. For both groups, students with better school achievement showed a significantly higher score (p<0.01). For the female student group, those who had nonsmoking fathers showed a significantly higher score(p<0.05). A perfect score for smoking attitude was 20 points. The male student group received 14.9 points and the female student group 16.3. For both groups, the score appeared to be significantly higher in the students who had better school achievement and no smoking experience. For the female group, the score was higher if they were living with widowed mothers or had nonsmoking parents. The percentage of smoking experience was 22.0% for the male group and 4.7% for the female group. The present smoking percentage of both groups accounted for 0.3% and 0.1%, respectively. The percentage of the male group's smoking experience was significantly higher if school achievement was poor, if the mother has religious, and if her occupation belonged to significantly different category. For the female group, it was significantly higher if a mother's educational background was less than the primary school level, or if a mother smokes. Family adaptability and cohesion were not significant variables for both groups. The score for smoking knowledge according to family cohesion was highest if male and female members were in an enmeshed state. For the female group, the higher the family adaptability, the significantly higher the score for smoking knowledge. The score for smoking attitude according to family cohesion showed a significant difference for both groups. The family adaptability was not a significant variable for both groups. The results of multiple regression analysis, with the scores for smoking knowledge and smoking attitude were used as a dependent variable, revealed that, for both groups, the better the school achievement. For the female group, the higher the family cohesion, the significantly higher the score(p<0.01). For the male group, the score for smoking attitude was significant1y higher if school achievement was better, if students were living with a widowed mother or father, if they had drinking mothers, if family adaptability was low, if family cohesion was high, or if the score for smoking knowledge was high. For the female group, the score for smoking attitude was higher if school achievement was better. Also, if famale student had nonsmoking fathers, if the family adaptability was lower, on the higher the score for smoking knowledge, a smoking attitude scored higher. The results of a multiple logistic analysis, with smoking experience as a dependent variable, revealed that, for the male student group, the worse the school achievement, the higher the score for smoking knowledge, the lower the score for smoking attitude, or the lower the family adaptability, the higher the percentage of smoking experience. For the female student group, the higher the score for smoking knowledge or the lower the score for smoking attitude, the higher the percentage of smoking experience. In conclusion, family environment, including smoking of parents and family functions, had a great effect on smoking knowledge, smoking attitude and smoking experience of students, and it is required to adjust subjects and methods for smoking and nonsmoking education as smoking attitude and smoking behavior greatly differ according to sex.

• The Korean Journal of Archival Studies
• /
• no.23
• /
• pp.227-256
• /
• 2010

This paper has two aims (1) to address the common European past by way of considering the development of the official archives of the European Union; and (2) to give specific attention to the activities of archivists in Germany. The EU archives contain the all the documents officially recording the common history of European integration from the establishment of the European Coal and Steel Community in 1951. It was at the beginning of the 1980s, thirty years after the production of these documents, however, that the Archives of the European Community (EC) began to be systematized for public use when the European University Institute in Florence in Italy was chosen as the deposit location for the archive. After the coming into effect of the Maastricht Treaty in 1993, the EC Archives were renamed as the EU Archives. Through the cooperation of the national archives of the each Member State of the EU with this EC Archives common norms regarding deposit were developed. This archives is a veritable gold mine for serious research into all and any official aspect of the institutional and policy history of today's EU, so for the formation of common European identity. The denazification process using the evidence of the archives contributed to the orientation of the New Germany towards Europe. The German archives then have been contributing to the redressing the past to a significant degree since after the Second World War. More recently, the establishment of the "Memory, Responsibility, and Future" Foundation in 2000 in Germany made possible cooperations with the archives of the East European countries and especially for the purpose of the providing evidence about former enforced workers under the Nazi regime. There has thus been developed European-wide networks among archives. These developments have furthered the common redressing of the European past and this process in turn has been contributing the enhancing the European spirit and identity. The thesis of this paper then is that historical research based on the EU archives and individual Member States can not only illuminate in great detail the stages of the history of European integration to date. The dissemination of such research can itself contribute to the process of the spreading of supranational ideas beyond Europe to other regions of the world.

• Journal of the Korean association of regional geographers
• /
• v.6 no.1
• /
• pp.1-28
• /
• 2000

The purpose of this study is to clarify the suburbanization of manufacturing, and location and linkages of decentralized manufacturing from Metropolitan Pusan by means of case study on manufacturing location and linkages in the suburb of Metropolitan Pusan. Kimhae city and Yangsan-Gun toward which heavy decentralization of manufacturing from the Metropolitan Pusan has been done. Both hard data and soft data were used as the basic data. Hard data are the statistical data in statistical yearbooks and firm list in directories. The former consists of the number of establishments and employees classified by product type, firm size and unit area. The latter consists of owner's names, addresses, employee number, products and headquarters of firms. Soft data are the results of the interviews with the 242 owners of firms in the four case study areas selected by Proportional Stratified Sampling Method. The major findings are as follows: 1. The spatial variations of manufacturing in the suburb was regularized in the latter half of 1970's. The primary processes to decentralize manufacturing from Metropolitan Pusan were the birth, relocation and establishment of branches of the firms. Among them the relocation of small outer-oriented single-location firms from Pusan was the most important. 2. The spatial variations undergoing spatial expansion of manufacturing distribution and increase of agglomeration degree of manufacturing, proceeded from the adjacents of Metropolitan Pusan to the outer areas along the main transportation route. 3. The main factors which caused manufacturing to decentralize from the Metropolitan Pusan were firm policy and land for this policy. The main locational factors which induced the decentralizing manufacturing into the suburb were land, market and transportation. 4. The strength of linkages with the outside of the study area is stronger than that of linkages with the inside. There is distance-decay-function in the strength of linkages with the outside, and linkages with short distant areas are stronger than those with long distant areas. 5. The ranges of spatial linkages in procurement of materials, in subcontraction and in marketing are wider than those in ordering. 6. The main factors which cause the formation of linkages are different by types of linkages: monopolistic and oligopolistic supply are important in procurement linkages; characteristics of products and the subsequent marketing difficulties, in subcontraction linkages; fluctuation, cost reduction, insufficient facility and characteristics of products, in ordering linkages; subcontract, characteristics of product and the subsequent marketing difficulties, in marketing linkages. 7. The changes of linkages owing to locational changes of firms were great, and were greater in long distant areas than in short distant areas. 8. The main factor influencing on the changes of linkages was the easiness in the transportation of goods, movement of labour and contacts with customers. In conclusion, some facts described above were proved to be consistent with the results of proceeding studies in the other areas: influence of relocation of decentralizing firms on the suburbanization; the factors of manufacturing decentralization; spatial characteristics of linkages; linkage changes owing to relocation of firms. Some were proved to be partly consistent: locational factors inducing decentralized manufacturing into the suburb were proved to be inconsistent. I think that the results of previous studies on the other areas can be applicable to the explanation on the decentralization of Metropolitan manufacturing from the viewpoint of the suburb. For the better explanation on the decentralization of Metropolitan manufacturing, more empirical case studies on the suburbanization of manufacturing are necessary.

• Journal of Korean Academy of Nursing Administration
• /
• v.6 no.1
• /
• pp.5-18
• /
• 2000

This study was conducted to analyze the degree of department satisfaction and correlation accordng to nurses's clinical characteristics. Data fors tudy were selected August, 1999. The sample coisted of 512 nurses working in K university hosptal in Seoul. The collected materials have been alyzed by percentage, average, t-test, ANOVA, arson Correlation Coefficiency using SPSS window 8.0 program. The result were as the follows ; 1. Fifty-one percent answered to be satisfactory in current department of work, and nurses who had been experienced the transfer are fifty percent, and nurse specialist is eight point two percent. 2. The order of the degree of department duty satisfaction was mutual action, professinal position, autonomy, assignment desire, relation between the doctor and nurses, wage, administration. 3. The result of the degree of department duty satisfaction according to the age has shown significant differences in administration and assignment desire, and the result of the degree of department duty satisfaction according to the education and religion has shown significant differences in administration, and the result of the degree of department duty satisfaction according to marital status has shown significant differences in wage and administration. 4. The result of the degree of department duty satisfaction according La the position has shown significant differences in administration, assignment desire and the sum of duty satisfaction, and the result of the degree of department duty satisfaction according to the nurse specialist has shown no significant differences in total areas, and the result of the degree of department duty satisfaction according to the transfer has shown significant differences in relation between the doctor and nurses, administration, autonomy and the sum of duty satisfaction. 5. The result of the degree of department duty satisfaction according to the nursing career and present assignment career has shown no significant differences in total areas, and the result of degree of department duty satisfaction according to the present assignment has shown significant differences in relation between doctor and nurses, administration, assignment desire and the sum of duty satisfaction. 6. The result of the degree of department duty satisfaction according to the request and experiences of trasfer has shown significant differences in wage, administration, assignment desire and the sum of duty satisfaction 7. The result of the degree of department duty satisfaction according to the degree of satisfaction of present assignment has shown no significant difference in professional position 8. The result of relation of nurses'a clinical characteristics and the degree of department duty satisfaction and the sum of duty satisfaction has shown no significant differences in age, present assignment career, but the result of nursing career has shown significant differences in relation between doctor and nurse, administration, autonomy, assignment desire and the sum of duty satisfaction. and the satisfaction of present assignment which was very effective on duty satisfaction was as significant correlation with wage, professinal position, relation between doctor and nurses, administration, autonomy assignment desire, mutual action and the sum of duty satisfaction. The above result show us that the degree of wage is effected on marital status, experience of transfer, degree of satisfaction of present assignment, request of transfef and the relation between doctor and nurses is effected on experience of transfer, present assignment, degree of satisfaction of present assignment and the administration is effected on age, education, marital status position, experiences of transfer, request of transfer, degree of satisfaction of present assignment and the autonomy is effected on experience of transfer, degree of satisfaction of present assignment and the assignment desire is effected on position, pre sent assignment, degree of satisfaction of present assignment, request of transfer and the mutual action is effected on present assignment. and the sum of duty satisfaction is effected on marital status, position, experience of transfer, request of transfer, present assignment, degree of satisfaction of present assignment.

• Applied Microscopy
• /
• v.30 no.4
• /
• pp.377-387
• /
• 2000

There are a few tanycytes between the general ependymal cells lining the ependymal layer of the brain ventricle. These cells are considered as modified ependymal cells which possess a long basal process. Tanycytes are known to have an ability to communicate by absorbing substances from cerebrospinal fluid and transporting them to the blood vessels and/or to the neurons in the CNS. The third and fourth ventricular tanycytes were mainly studied as subjects but it's rare to find reports about the tanycytes of the area postrema. Glial fibrillary acidic protein is an intermediate filament protein that is expressed especially in astrocytes of the CNS. But GFAP is also found in filament of the tanycytes and its process. Therefore this study was carried out for the examination of the GFAP immunoreactive tanycytes lining the area postrema of the bat, and we also examined the ultrastructure of tanycytes using electron microscope. GFAP immunoreactive tanycytes were located in the caudal portion of the fourth ventricle, and especially mainly in the transitional zone between the floor of the caudal fourth ventricle and ependymal layer lining the area postrema. A few GFAP immunoreactive tanycytes were also found in the ependymal layer lining the area postrema, and some groups of tanycytes were found in the ependymal layer of the area postrema near the floor of the caudal fourth ventricle , The processes of tanycytes were stained deeply with anti-GFAP antibody. Especially the GFAP immunoreactive tanycytes lining the area postrema had very long processes that cross the whole width of the area postrema. In the electron microscope, the cell body of ependymal tanycyte was located on the ependymal layer and had a long basal process. Intermediate filaments were observed around the nucleus and well developed in the process of tanycrte. Longitudinal oriented long mitochondria and a few lipid droplets were also found in this process. After immunocytocheical staining, the gold particles were found only in the intermediate filaments. We could not determine the function of the tanycytes in the area postrema. Thus, further investigation is required to determine the functional relationship between the tanycytes and the area postrema in hibernating animal, the bat.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Health Policy and Management
• /
• v.27 no.4
• /
• pp.273-275
• /
• 2017

It has been forty years since the implementation of National Health Insurance (NHI) in South Korea. Following the 1977 legislature mandating medical insurance for employees and dependents in firms with more than 500 employees, South Korea expanded its health insurance to urban residents in 1989. Resultantly, total expenses of the National Health Insurance Service (NHIS) have greatly increased from 4.5 billion won in 1977 to 50.89 trillion won in 2016. With multiple insurers merging into the NHI system in 2000, a single-payer healthcare system emerged, along with separation policy of prescribing and dispensing. Following such reform, an emerging financial crisis required injections from the National Health Promotion Fund. Forty years following the introduction of the NHI system, both praise and criticism have been drawn. In just 12 years, the NHI achieved the fastest health population coverage in the world. Current medical expenditure is not high relative to the rest of the Organization for Economic Cooperation and Development. The quality of acute care in Korea is one of the best in the world. There is no sign of delayed diagnosis and/or treatment for most diseases. However, the NHI has been under-insured, requiring high-levels of out-of-pocket money from patients and often causing catastrophic medical expenses. Furthermore, the current environmental circumstances of the NHI are threatening its sustainability. Low birth rate decline, as well as slow economic growth, will make sustainment of the current healthcare system difficult in the near future. An aging population will increase the amount of medical expenditure required, especially with the baby-boomer generation of those born between 1955 and 1965. Meanwhile, there is always the problem of unification for the Korean Peninsula, and what role the health insurance system will have to play when it occurs. In the presidential election, health insurance is a main issue; however, there is greater focus on expansion and expenditure than revenue. Many aspects of Korea's NHI system (1977) were modeled after the German (1883) and Japanese (1922) systems. Such systems were created during an era where infections disease control was most urgent and thus, in the current non-communicable disease (NCD) era, must be redesigned. The Korean system, which is already forty years old, must be redesigned completely. Although health insurance benefit expansion is necessary, financial measures, as well as moral hazard control measures, must also be considered. Ultimately, there are three aspects that we must consider when attempting redesign of the system. First, the health security system must be reformed. NHI and Medical Aid must be amalgamated into one system for increased effectiveness and efficiency of the system. Within the single insurer system of the NHI must be an internal market for maximum efficiency. The NHIS must be separated into regions so that regional organizers have greater responsibility over their actions. Although insurance must continue to be imposed nationally, risk-adjustment must be distributed regionally and assessed by different regional systems. Second, as a solution for the decreasing flow of insurance revenue, low premium level must be increased to an appropriate level. Likewise, the national reserve fund (No. 36, National Health Insurance Act) must be enlarged for re-unification preparation. Third, there must be revolutionary reform of benefit package. The current system built a focus on communicable diseases which is inappropriate in this NCD era. Medical benefits must not be one-time events but provide chronic disease management. Chronic care models, accountable care organization, patient-centered medical homes, and other systems that introduce various benefit packages for beneficiaries must be implemented. The reimbursement system of medical costs should be introduced to various systems for different types of care, as is the case with part C (Medicare Advantage Program) of America's Medicare system that substitutes part A and part B. Pay for performance must be expanded so that there is not only improvement in quality of care but also medical costs. Moreover, beneficiaries of the NHI system must be aware of the amount of their expenditure through a deductible payment system so that spending can be profiled and monitored. The Moon Jae-in Government has announced its plans to expand the NHI system; however, it is important that a discussion forum is created so that more accurate analysis of the NHI, its environments, and current status of health care system, can take place for reforming NHI.

• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.321-331
• /
• 2000

Multiple 15-hue tests were designed and implemented on a PC in the study so as to quickly and quantitatively evaluate color vision acuity. Difficulty of the test was control)ed by the value of CDBACC (color difference between adjacent color chips) calculated using a CIELAB formula. The multiple 15-hue tests consist of eight of the hue tests (test 3-10) and three of the basic color (red, green, blue) tests (test 11-13). The 15 colors used for the hue tests were specified by the 15 color coordinates that were located at a constant distance (d = 2. 3. 5. 7, 10, 20, 30. 40) from white reference in the CIE chromaticity coordinate system and were separated by a constant color difference (CDBACC = 0.75, 1.1, 1.8. 2.5. 3.5. 7.5. 11, 14) from the adjacent chips. The color coordinates for the 15 chips for the basic color tests were the same as those of the 15 points spaced equally by a constant color difference (6.87 for the green color test. 7.27 for the red color test, 7.86 for the blue color test) from the white reference along the axis of red, green and blue. Thirty normal subjects who were not color blind were taken to undergo the multiple 15-hue tests. It was observed that most of the subjects correctly arranged color chips for the tests with CDBACC greater than 5, whereas no one correctly answered for those with CDBACC less than 2. Rapid changes in the number of the subjects correctly arranged took place when CDBACC of the tests was between 2 and 4.5. In the basic color tests, unlike the hue tests having similar values of CDBACC, it was seen that the subjects arranged color chips even less correctly. It was found that JNCD (just noticeable color difference) - a measure of color vision acuity was about 3 in average for the subjects. The JNCD was chosen as the value of the CDBACC of the test for which about $50\%$ of the subjects failed to successfully arrange color chips. ERCCA (error rate of color chips arrangement) for the test with CDBACC the same as the JNCD was shown to be about $20\%$. It is expected that the multi 15-hue tests implemented on a PC in the study will be an economical tool to quickly and quantitatively evaluate color vision acuity and, accordingly, the tests can be used for early diagnosis to massive potential patients suffering from diseases (ex. diabetes, glaucoma) which may induce changes in color vision acuity.

• Journal of the Korean Home Economics Association
• /
• v.38 no.5
• /
• pp.137-152
• /
• 2000

North Korean fugitives is one of various nominations referring to the North Koreans who have secretly crossed the territorial border of their country. It is a new terminology that huts gained wider usage in our society as we entered the 1990s. North Koreans list various motives for escaping their county, such as food shortage and disillusionment of belief in the system. Most of the forced repatriation of North Korean escapees takes place in China. The purpose of this study examines the family knife of female fugitives from North Korea in order to provide pertinent alterntives which are needed to secure basic human right of the female fugitives and enable them to keep stability of their family lives and to adapt themselves into new socio-cultural circumstances in China. For this, the preliminary survey performed to examine the demographic characteristics on the female fugitives; to find out the incentives and channels of their escape out of North Korea; to investigate what types of family life and family relationship they manage in China; to grasp their problems and need of family life in adaptation into Chinese society. The specific questions for grasping the general characteristics of the female fugitives are composed of age, education level residential district in North Korea. In order to find out main causes and influential factors of their escape from North Korea, the following questions are included: what the most important incentives and motives are; the frequency of escape; and whether they discuss their escape with their family or not. The questions to find out their present actual life situations in China are about difficult things to adjust in China, family life, relationship with husband, and their conversational diction, the degree of their mastering the chinese language, the degree of their adaptation to chinese way of living, and so forth, which reveal to what extent they are adapted themselves to new cultural situation in China. This study collected the data through face-to-face personal interview from July to October, 1999 Yenben province along the China-North Korea border. Data from 202 female fugitives were used in final analysis. This study uses the SAS PC program for windows, Ver, 6.12 to analyze the data such as the distribution of frequency, percentage, mean and so on. The results from this analysis are follows; the most principal motive of North Korean women's escape to china is to eat to live because of famine. Concerning the year when the fugitives escape from North Korea, all of the interviewees haute escaped since 1990. After escape their continual contact with their family in North Korea, 81.7% of the respondent have not been in touch with their family. The main reasons for their not contacting with their family in North Korea are that it is not helpful although they contacts with their family. Female fugitives from North Korea have difficulties in life. They have rather stable relationship to their husband, but they have experienced difficulties in other aspects of family life. Their main difficulties are largely from their relationships to husbands'family members, and from the problems relate to their family in North Korea, and their children. Based on this study, further research has to present supportive policies that help North Korean female escapees live without being deprived and protect their human rights. And the development of practical program to help their efficient social adaptation has to be continued without stop together.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1153-1153
• /
• 2001

Directive 79/373/EEC on the marketing of compound feeding stuffs, provided far a flexible declaration arrangement confined to the indication of the feed materials without stating their quantity and the possibility was retained to declare categories of feed materials instead of declaring the feed materials themselves. However, the BSE (Bovine Spongiform Encephalopathy) and the dioxin crisis have demonstrated the inadequacy of the current provisions and the need of detailed qualitative and quantitative information. On 10 January 2000 the Commission submitted to the Council a proposal for a Directive related to the marketing of compound feeding stuffs and the Council adopted a Common Position (EC N$^{\circ}$/2001) published at the Official Journal of the European Communities of 2. 2. 2001. According to the EC (EC N$^{\circ}$ 6/2001) the feeds material contained in compound feeding stufs intended for animals other than pets must be declared according to their percentage by weight, by descending order of weight and within the following brackets (I :< 30%; II :> 15 to 30%; III :> 5 to 15%; IV : 2% to 5%; V: < 2%). For practical reasons, it shall be allowed that the declarations of feed materials included in the compound feeding stuffs are provided on an ad hoc label or accompanying document. However, documents alone will not be sufficient to restore public confidence on the animal feed industry. The objective of the present work is to obtain calibration equations fur the instanteneous and simultaneous prediction of the chemical composition and the percentage of ingredients of unground compound feeding stuffs. A total of 287 samples of unground compound feeds marketed in Spain were scanned in a FOSS-NIR Systems 6500 monochromator using a rectangular cup with a quartz window (16 $\times$ 3.5 cm). Calibration equations were obtained for the prediction of moisture ($R^2$= 0.84, SECV = 0.54), crude protein ($R^2$= 0.96, SECV = 0.75), fat ($R^2$= 0.86, SECV = 0.54), crude fiber ($R^2$= 0.97, SECV = 0.63) and ashes ($R^2$= 0.86, SECV = 0.83). The sane set of spectroscopic data was used to predict the ingredient composition of the compound feeds. The preliminary results show that NIRS has an excellent ability ($r^2$$\geq$ 0, 9; RPD $\geq$ 3) for the prediction of the percentage of inclusion of alfalfa, sunflower meal, gluten meal, sugar beet pulp, palm meal, poultry meal, total meat meal (meat and bone meal and poultry meal) and whey. Other equations with a good predictive performance ($R^2$$\geq$0, 7; 2$\leq$RPD$\leq$3) were the obtained for the prediction of soya bean meal, corn, molasses, animal fat and lupin meal. The equations obtained for the prediction of other constituents (barley, bran, rice, manioc, meat and bone meal, fish meal, calcium carbonate, ammonium clorure and salt have an accuracy enough to fulfill the requirements layed down by the Common Position (EC Nº 6/2001). NIRS technology should be considered as an essential tool in food Safety Programs.