• Magazine of the Korean Society of Agricultural Engineers
• /
• v.34 no.4
• /
• pp.69-79
• /
• 1992

To estimate soil behavior and structural characteristics under the conditions of cyclic loading, freezing & thawing and initial state, several testing was performed and obtained following results. 1.After repeated freezing and thawing processes, original soil structure was destroyed and changed to globular structure from honeycomb or tube in its structure types. Also above processes resulted increasing the soil compression strain while decreasing the failure stress in stress-strain relationship and reached the soil structure into the mode of brittle fracture. Under cyclic loading conditions, soil cluster which was originally dispersed structure colloided with each other, seperated, and finally the soil failed due to the effect of overcompaction. 2.Through the stabilization processes seperated by four steps, the structure of soil skeleton was changed to quite different globular type. The degree of compressibility of soil was decreased in the normally consolidated zone, while the strength against external load increased due to soil particle stabilization. 3.Soil stress-strain chracteristics were largely influenced by repeated up and down processes of temperature. The maximum deformation was obtained in the case of temperature between 0 10˚C by the reseon of particle cluster reformation. 4.Soil compressibility was largely influenced by the optimum moisture content. Under freezing process, swelling could be found and its magnitude was proportional to the density of soil. 5.Density of soil was decreased as increasing the number or repeated freezing and thawing processes and the largest decreasing rate was found at the first turning point from freezing to thawing cycle.

• Journal of the Korean Dietetic Association
• /
• v.13 no.4
• /
• pp.345-356
• /
• 2007

The purpose of this study was to investigate utilization and storage management practice of the frozen and refrigerated foods in school foodservice. 222 dietitians employed in school foodservice were surveyed. In school foodservice, the refrigerated stock farm products and seafoods (78.3%) were more used rather than frozen products (47.5%). According to school foodservice characteristics, the refrigerated meats including dairy products were more frequently used in elementary and middle schools than high school foodservice. On the other hand, the foodservice in high school used more frozen seafoods and processed foods than elementary school did. The data also showed a tendency for the contracted foodservice using more frozen meats and seafoods rather than refrigerated products when comparing with the self-operated foodservice. In terms of receiving conditions, storage methods and storage time, the result indicated that frozen or refrigerated products were often delivered at inappropriate temperature. Especially some products which were needed to be shipped and stored at refrigerated temperature such as mollusks, were delivered and kept at room temperature. The most frequently used thawing method were running water (56.9%), however, the frozen products were often sitted at room temperature for the purpose of thawing. According to the results, several inappropriate handling processes for frozen and refrigerated products were found in school foodservice. In order to improve handling process for frozen and refrigerated products, recognition of food handlers' weakness about storage and distribution, development of radical standards for receiving conditions, storage and thawing methods should be debated.

• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.132-139
• /
• 2010

Sericin pulverization process was applied by freezing-thawing of sericin protein concentration solution and physicochemical properties of sericin/chitosan blended films were investigated. In sericin pulverization process by freezing-thawing method, the refrigeration storage at $4^{\circ}C$ maximized gelling between sericin molecules, which increased 10% of recovery ratio from sericin concentration solution that using ultrafiltration procedure. In physicochemical properties of sericin/chitosan blended films, the maximum load of chitosan (6.7kgf) had higher than that of sericin (1.2kgf), and the elongation of sericin and chitosan had 96% and 34%, respectively. Also FT-IR analysis of sericin/chitosan blended films showed that both sericin and chitosan films had amide I peak (N-H bond) in $1,521cm^{-1}$ and amide II peak (C=O bond) in $1,630cm^{-1}$. In addition, it could confirm compatibility between both materials as indicated by the decrease in the amide I peak's absorption value as chitosan content increases.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.11 no.2
• /
• pp.91-95
• /
• 1978

Histological changes of the abalone muscle occurring in the process of freezing as well as thawing were investigated, and its results were compared to the histological structure of fresh muscle. The muscles of the abalone were mainly composed of smooth muscle fibres, and its morphological structures is similar to those of the top shell. Mechanical damgage of the muscle fibres caused by freezing were not observed while a number of small ice crystals were found between the muscle fibres. The damage by thawing was not much remakable compare to the destruction of muscle fibres of fish.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.3_4
• /
• pp.61-71
• /
• 1995

Natural ground is a composite consisted of the three phases of water, air and soil paircies. Among the three components, water as a material is weU understood but soil particles are not in foundation engineering. Especially, weathered granite soil generally shows a large volumetric expansion when they freeze. And, the stability and durability of the soil have shown decreased with repetitive freezing and thawing processes. These unique charcteristics may cause various construction and management problems if the soil is used as a construction material and foundation layers. This project was initiated to investigate the soil's physical and engineering characteristics resulting from freezing and freezing-thawing processes. Research results may be used as a basic data in solving various problems related to the soil's unique characteristics. The following conclusions were obtained: The degree of decomposition of weathered granite soil in Kangwon-do was very different between the West and East sides of the divide of the Dae-Kwan Ryung. Soil particles distributed wide from very coarse to fine particles. Consistency could be predicted with a function of P200 as LL=0.8 P200+20. Permeability ranged from 10-2 to 10-4cm/sec, moisture content from 15 to 20% and maximum dry density from 1.55 to 1.73 g /cmΥ$^3$ By compaction, soil particles easily crushed, D50 of soil particles decreased and specific surface significantly increased. Shear characteristics varied wide depending on the disturbance of soil. Strain characteristics influenced the soil's dynamic behviour. Elastic failure mode was observed if strain was less than 1O-4/s and plastic failure mode was observed if strain was more than 10-2/s. The elastic wave velocity in the soil rapidly increased if dry density became larger than 1.5 g /cm$^3$ and these values were Vp=250, Vg= 150, respectively. Frost heave ratio was the highest around 0 $^{\circ}C$ and the maximum frost heave pressure was observed when deformation ratio was less than 10% which was the stability state of soil freezing. The state had no relation with frost depth. Over freezing process was observed when drainage or suction freezing process was undergone. Drainage freezing process was observed if freezing velocity was high under confined pressure and suction frost process was occurred if the velocity was low under the same confined process.

• Food Science and Preservation
• /
• v.24 no.2
• /
• pp.168-180
• /
• 2017

This study was performed to determine the rapid thawing method for reducing the thawing time of frozen pork loins and to examine the effects of supercooling on the microbiological, physicochemical, and sensory qualities of fresh and frozen-thawed pork during storage at -1.5, 4, and $15^{\circ}C$. Forced-air thawing at $4^{\circ}C$ was the most time-consuming process, whereas radio frequency thawing time was the shortest by dielectric heating. The supercooling storage temperature was chosen to be $-1.5^{\circ}C$ because microstructural damages were not observed in the pork sample after cooling at $-1.5^{\circ}C$ for 24 h. Fresh or frozen-thawed pork loins stored at $-1.5^{\circ}C$ had lower drip loss and total volatile base nitrogen, thiobarbituric acid-reactive substance, and Hunter b* levels than loins stored at 4 and $15^{\circ}C$. In addition, the least degree of increase in preexisting microorganisms counts of the fresh or frozen-thawed pork loin samples was obtained during supercooled storage at $-1.5^{\circ}C$. Sensory quality results of fresh and frozen-thawed pork loin samples stored at $-1.5^{\circ}C$ showed higher scores than the samples stored at 4 and $15^{\circ}C$. These data indicate that supercooling at $-1.5^{\circ}C$ in the meat processing industry would be effective for maintaining the quality of pork meats without ice crystal nucleation and formation.

• Journal of Food Hygiene and Safety
• /
• v.31 no.1
• /
• pp.42-50
• /
• 2016

The effects of freezing and thawing conditions on microbiological quality and microstructure change of inoculated (Listeria monocytogenes and Campylobacter jejuni) and non-inoculated chicken breasts were investigated. Chicken breasts were frozen with air blast freezing (-20, -70, and $-150^{\circ}C$), ethanol ($-70^{\circ}C$) and liquid nitrogen ($-196^{\circ}C$) immersion freezing. There were no significant differences on the populations of L. monocytogenes inoculated with chicken breasts under different freezing conditions. However, air blast freezing ($-20^{\circ}C$) resulted in significant reductions for total aerobic bacteria and C. jejuni compared to the control and other freezing treatments. The frozen samples were thawed with (hot or cold) air blast, water immersion, and high pressure thawing at $4^{\circ}C$ and $25^{\circ}C$. the populations of total aerobic bacteria, and yeast and mold in the frozen chicken breast increased by 5.78 and 4.05 log CFU/g after water immersion thawing ($25^{\circ}C$) treatment. After five freeze-thaw cycles, the populations of total aerobic bacteria, yeast and mold, and C. jejuni were reduced by 0.29~1.40 log cycles, while there were no significant differences (P > 0.05) in the populations of L. monocytogenes depending on the freeze-thaw cycles. In addition, the histological examination of chicken breasts showed an increase in spacing between the muscle fiber and torn muscle fiber bundles as the number of freeze-thaw cycles increased. These results indicate that freezing and thawing processes could affect in the levels of microbial contamination and the histological change of chicken breasts.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.5
• /
• pp.47-56
• /
• 2014

In winter season, the pore water inside the ground freezes and thaws repetitively due to the cold air temperature. When the freezing-thawing processes are repeated on the ground, the change in soil particle structure occurs and thus the damage of the infrastructure may be following. This study was performed in order to investigate the stiffness change of soils due to the freeze-thaw by using elastic waves. Sand-silt mixtures are prepared with in the silt fraction of 40 %, 60 % and 80 % in weight and in the degree of saturation of 40 %. The specimens are placed into the square freezing-thawing cell by the temping method. For the measurement of the elastic waves, a pair of the bender elements and a pair of piezo disk elements are installed on the cell, and a thermocouple is inserted into soils for the measurement of the temperature. The temperature of the mixtures is decreased from $20^{\circ}C$ to $-10^{\circ}C$ during freezing, is maintained at $-20^{\circ}C$ for 18 hours, is gradually increased up to the room temperature of $20^{\circ}C$ to thaw the specimens. The shear waves, the compressional waves and the temperature are measured during the freeze-thaw process. The experimental result indicates that the shear and the compressional wave velocities after thawing are smaller than those of before freezing. The velocity ratio of after thawing to before freezing of shear wave is smaller than that of the compressional wave. As silt fraction increases from 40 % to 80 %, the shear and compressional wave velocities are gradually increased. This study suggests that the freezing-thawing process in unsaturated soil loosens the soil particle structure, and the shear wave velocity reflects the effect of freezing-thawing more sensitively than the compressional wave velocity.

• Food Engineering Progress
• /
• v.21 no.1
• /
• pp.57-63
• /
• 2017

This study investigated the effects of 27.12 MHz radio frequency (RF) heating on heat transfer phenomena during the thawing process of frozen food. To determine the velocity of the RF thawing machine, samples were frozen at $-80^{\circ}C$ and subjected to different power treatments. The phase change times (-5 to $0^{\circ}C$) of frozen radish were 30, 26, 13, and 8 min; those of pork sirloin were 38, 25, 11, and 5 min; those of rump were 23, 17, 11, and 6 min; those of chicken breast were 42, 29, 13, and 9 min; and those of tuna were 25, 23, 10, and 5 min at 50, 100, 200, and 400 W, respectively. The heating limit temperatures of the radish, pork sirloin, rump, chicken breast, and tuna samples were 19.5, 9.2, 21.8, 8.8, and $16.8^{\circ}C$ at 50 W; 23.5, 15.5, 27.3, 12.3, and $19^{\circ}C$ at 100 W; 42, 26.9, 45.7, 22.1, and $39.4^{\circ}C$ at 200 W; and 48.5, 54.7, 63.6, 57.3, and $44.9^{\circ}C$ at 400 W. These results suggest that high-power RF improves thawing velocity and heating limit temperatures, and that an improvement on the operation of the RF thawing machine, according to food temperatures, is needed.

• Food Engineering Progress
• /
• v.21 no.4
• /
• pp.332-340
• /
• 2017

This study investigated the changes in the physicochemical properties of soybean sprout, radish, and pork loin during frozen Bibimbab production. The qualities of soybean sprout were affected by the blanching, thawing, and cooking processes, with the blanching process particularly regarded as an important process to attribute the overall quality of the soybean sprouts in the final product. High weight loss of radish was found in the thawing and cooking processes, while the weight loss was relatively lower than that of soybean sprout. However, mixing with hot rice can be attributed for the steep decrease in shear force of the radish. For pork meat, normally thermal treatment such as mixing with hot rice and cooking manifested quality deterioration. Based on the results, mixing process appeared to be the most important process which affected the final quality of the materials. To improve the quality of final frozen Bibimbab, therefore, it was recommended to freeze the food ingredient separately from rice prior to packaging, which warranted the follow up exploration.