• Transactions of Materials Processing
• /
• v.28 no.5
• /
• pp.287-293
• /
• 2019

The plastic strain ratio is one of the factors of the deep drawability of metal sheets. The plastic strain ratio of Al sheet is low value. Therefore, it is necessary to increase the plastic strain ratio in order to improve the deep drawability of the Al sheet. This study investigated the increase in the plastic strain ratio and the texture change of AA1050 Al sheet after the hot asymmetric rolling. The average plastic strain ratio of initial AA1050 Al sheets was 0.41. After 84% hot asymmetric rolling at $400^{\circ}C$, the average plastic strain ratio was 0.77. The average plastic strain ratio of 84% hot asymmetrically rolled AA1050 Al sheet at $400^{\circ}C$ is 1.9 times higher than that of initial AA1050 Al sheet. The ${\mid}{\Delta}R{\mid}$ of 84% hot asymmetrically rolled AA1050 Al sheet at $400^{\circ}C$ is 1/2 times lower than that of initial AA1050 Al sheet. This result is due to the development of the intensity of the ${\gamma}-fiber$ texture and the decrease of the intensity of {001}<100> texture after the hot asymmetric rolling of AA1050 Al sheet.

• ETRI Journal
• /
• v.45 no.3
• /
• pp.505-517
• /
• 2023

Color, texture, and shape act as important information for images in human recognition. For content-based image retrieval, many studies have combined color, texture, and shape features to improve the retrieval performance. However, there have not been many powerful methods for combining all color, texture, and shape features. This study proposes a content-based image retrieval method that uses the combined local and global features of color, texture, and shape. The color features are extracted from the color autocorrelogram; the texture features are extracted from the magnitude of a complete local binary pattern and the Gabor local correlation revealing local image characteristics; and the shape features are extracted from singular value decomposition that reflects global image characteristics. In this work, an experiment is performed to compare the proposed method with those that use our partial features and some existing techniques. The results show an average precision that is 19.60% higher than those of existing methods and 9.09% higher than those of recent ones. In conclusion, our proposed method is superior over other methods in terms of retrieval performance.

• Culinary science and hospitality research
• /
• v.24 no.3
• /
• pp.113-120
• /
• 2018

In this study, to enhance the applicability of the black current as a natural pigment and functional material, a jelly was produced by adding 0 %, 3 %, 6 %, 9 %, and 12 % of the black current powder. The pH and moisture content of the black currant jelly decreased with the addition of the black currant powder, while the sweetness($^{\circ}brix%$) of the jelly increased with the addition of the black currant powder. The chromaticity of the jelly was reduced as the black current powder was added, as the L value and b value increased. Texture measurement score in terms of hardness, chewiness and brittleness of groups with 3% and 6% black currant powder were significantly higher when compared to the control group. The contents of total polyphenol, DPPH radical scavenging activity, and NSA radical scavenging activity of groups by the addition of black currant powder were higher than those of control group. The anthocyanin contents increased proportionally with increasing levels of black currant powder. The sensory evaluation scores in terms of after swallowing, appearance, odor, taste, texture, and overall preference of groups with 6% and 9% black currant powder. Also, the anti oxidative activity and anthocyanine pigment in black current powder are highly visible even after the heating process, so it may be helpful to enhance the functionality of jelly by using natural colors that are highly antioxidants in jelly manufacture.

• Korean journal of food and cookery science
• /
• v.19 no.6
• /
• pp.772-776
• /
• 2003

This study was performed to determine the quality characteristics of lemon pyun with various kinds of getting agents: agar, gelatin, sweet Potato starch, corn starch and Potato starch. Lemon Pyun was made with lemon juice(21.4％), gelling agent(6.7％), water(53.3％), sugar(13.3％) and honey(5.3％). The quality characteristics of the sample were estimated in terms of pH, color difference, texture profile analysis and sensory evaluation. (Ed- as this is an abstract this introductional clause is unnecessary) The PH of lemon pyun showed no significant difference among the different gelling agents. Lightness was significantly(p＜0.05) lowered in the agar and gelatin groups, a value was significantly(p＜0.05) lowered in the sweet potato starch and potato starch groups, and b value was significantly(p＜0.05) lowered in the sweet potato starch group. In texture profile analysis, chewiness, gumminess and hardness were significantly(p＜0.05) increased in the sweet potato starch group. According to sensory evaluation, elasticity and hardness of the sweet potato starch and cornstarch groups were stronger(p＜0.05) than of other gelling agent groups. Lemon pyun containing sweet potato starch was most preferable in terms of Vitamin C provision.

• Journal of the Korean Society for Heat Treatment
• /
• v.28 no.4
• /
• pp.171-180
• /
• 2015

The variation in microstructure and texture during continuous annealing was examined in a series of 1.6% Mn-0.1% Cr-0.3% Mo-0.005% B steels with carbon contents in the range of 0.010 to 0.030%. It was found that microstructure of hot band consisted of ferrite and pearlite as a consequence of high coiling temperature, and eutectoid carbon content was between 0.011% and 0.016%. Martensite ranged in volume fraction from 1.5% to 4.0% when annealed at $820{\circ}C$ according to the typical continuous annealing cycle. The critical martensite content for the continuous yielding was about 4% from stress-strain curves. The continuous yielding was obtained in the 0.030% carbon steel and 0.010% to 0.020% carbon steels revealed some yield point elongation ranging from 0.8% to 2.2% in as-annealed conditions. Higher tensile strength in the higher carbon steel is due to both increase in the martensite volume fraction and ferrite grain refinement. Decreasing the carbon content to 0.01% strengthened the intensities of ${\gamma}$-fiber textures, resulting in the increase in the $r_m$ value, which was caused by the lower volume fraction of martensite. The higher carbon steels showed the lower $r_m$ value of about 1.0.

• Journal of the Korean Home Economics Association
• /
• v.38 no.3
• /
• pp.121-130
• /
• 2000

This study attempted to determine the effects of sucrose, NaCl and acetic acid on the quality characteristics of cooked rice stored at 20$\^{C}$ for 72 hours. It conducted a moisture content, color value, texture and RVA(Rapid Visco Analyser) viscosity on stored cooked rice. Moisture contents of all groups ecreased during storage and that of cooked rice with NaCl were significantly lower than that of other groups. In color, lightness(L) of cooked rice with various additives seemed higher than that of control group and reduced b value of cooked rice with acetic acid showed that the color became less yellow. In texture, the hardness of cooked rice with NaCl and sucrose was higher than that of control group, whereas that of cooked rice with acetic acid was similar to that of control group. Adhesiveness of cooked rice with acetic acid was higher than that of other groups and it was shown that texture could be improved by the addition of acetic acid. The initial viscosity of cooked rice with acetic acid was markedly higher than that of other groups and finial viscosity was lower than that of other groups. It seemed that addition of acetic acid could retard the retrogradation of stored cooked rice.

• Journal of Radiation Industry
• /
• v.5 no.4
• /
• pp.383-391
• /
• 2011

This study was conducted to investigate the applicability of gamma irradiation for improving the quality of paprika and Japanese apricot extract-treated nitrite free pork jerky. Pork jerky was gamma-irradiated at 0, 3, 5, 7 and 10 kGy and physiochemical properties such as proximate composition, 2-thiobarbituric acid (TBARS) values, color stability, texture, and sensory property were then evaluated. The results showed that the treatment of paprika and Japanese apricot extract to the pork jerky increased Hunter color value and texture property and at the same time decreased TBARS values. When gamma irradiated, natural pigment extract-treated pork jerky did not produce any change in its proximate composition (moisture, crude protein, crude lipid contents), and TBARS values. However, the redness (a-value) of pork jerky increased as the irradiation dose increased, whereas shear force of pork jerky was decreased. Sensory result showed that gamma irradiation induced to decrease the sensory scores. Therefore, these results suggest that gamma irradiation and the addition of paprika and Japanese apricot extracts could be an effective mean to improve color and texture of restructured pork jerky without use of nitrite.

• International Journal of Computer Science & Network Security
• /
• v.23 no.7
• /
• pp.61-70
• /
• 2023

Image segmentation is a very crucial step in effective digital image processing. In the past decade, several research contributions were given related to this field. However, a general segmentation algorithm suitable for various applications is still challenging. Among several image segmentation approaches, graph-based approach has gained popularity due to its basic ability which reflects global image properties. This paper proposes a methodology to partition the image with its pixel, region and texture along with its intensity. To make segmentation faster in large images, it is processed in parallel among several CPUs. A way to achieve this is to split images into tiles that are independently processed. However, regions overlapping the tile border are split or lost when the minimum size requirements of the segmentation algorithm are not met. Here the contributions are made to segment the image on the basis of its pixel using min-cut/max-flow algorithm along with edge-based segmentation of the image. To segment on the basis of the region using a homogenous optimum cut algorithm with boundary segmentation. On the basis of texture, the object type using spectral partitioning technique is identified which also minimizes the graph cut value.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.6
• /
• pp.830-837
• /
• 2011

This study was carried out to investigate the quality characteristics of yellow layer cake mulberry powder. After making yellow layer cake with mulberry powder, water activity, crumb texture, crumb color, and sensory tests were investigated. After 1 day of storage, Aw of control with weak flour did not show any significant difference, whereas those with 1, 3. 5% mulberry powder showed a significant decrease in Aw. During storage, the Aw values of yellow layer cakes containing mulberry powder were consistent. Hardness, springiness, cohesiveness, and gumminess of the yellow layer cakes containing mulberry powder all decreased compared to those of control. Hardness, springiness, cohesiveness, and gumminess all increased with storage time. Further a higher percentage of mulberry powder was associated with a lower L value, but higher a value. b values were lower in the 1% and 3% mulberry powders, but 5% showed a slightly higher b value. An increase in storage time was associated with decreased L and b values and increased a value. The micrographs of yellow layer cakes with mulberry powder showed a slightly coarser porosity than that of controls. The results of the sensory test showed that the over-all acceptability of 1% mulberry powder cake was the best.

• Culinary science and hospitality research
• /
• v.22 no.8
• /
• pp.99-108
• /
• 2016

This study was conducted to investigate the effect of Chinese artichoke powder on the physicochemical properties and the sensory characteristics of yanggaeng. According to the increasing contents of Chinese artichoke powder, the $^{\circ}Brix$ value and pH levels of yanggaeng were significantly decreased whereas the moisture contents of yanggaeng was significantly increased. The result of color measurement shown that L value of groups containing Chinese artichoke powder was lower than that of control group, but a value and b value of groups containing Chinese artichoke powder were higher. Texture measurement score in terms of cohesiveness, chewiness, and brittleness for yanggaeng were significantly decreased according to the levels of added Chinese artichoke powder content. The contents of total polyphenol, DPPH radical scavenging activity, and NSA of groups containing Chinese artichoke powder were higher than those of control group. As Chinese artichoke powder increased, antioxidative activity also became bigger. Sensory evaluation scores in terms of appearance, odor, taste, texture, and overall preference of groups with 2% and 4% of Chinese artichoke powder did not show any significantly differences when compared to the control group. Based on these findings, current study suggest that addition of 4% Chinese artichoke powder was the best substitution ratio for yanggaeng.