• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.spc
• /
• pp.40-44
• /
• 2009

This study was carried for the understanding of infiltration and percolation characteristics of water in agricultural land filled with rock-dust (Technosols). The experiment was performed at two sites (A, B), and soil horizons of the sites were classified with 4 layers, respectively. The soil texture of all soil horizons was analyzed with silt loam (SiL) except for the soil texture, which was loamy sand (LS), at the lowest horizon of measurement site A. The bulk densities at each horizon of two soils were mostly over $1.49g{\cdot}cm^{-3}$, which is very higher than $1.25g{\cdot}cm^{-3}$ of typical medium-textured mineral soil, except for the surface of site A measured immediately after tillage. The concentrations of $P_2O_5$ at surface of two soils s were 1962 (A), 1613 (B) $mg{\cdot}kg^{-1}$, respectively. These concentrations are 3.2~6.5 times of $300{\sim}500mg{\cdot}kg^{-1}$, which is the optimum concentration for crop growth. Infiltration rates at surface of the soils were 3.54 (A), 2.85 (B) cm $hr^{-1}$, but percolation rates at soil horizons under the surface were below 0.3 (A), below 0.003 (B) cm $hr^{-1}$. These results would be because the surface soils were managed by tillage and crop planting etc., but soils under surface were formed with structural problems occurred at the formation time of agricultural land accumulated with rock-dust or a compaction by farm machines.

• Korean journal of food and cookery science
• /
• v.20 no.6 s.84
• /
• pp.607-613
• /
• 2004

The purpose of this study was to investigate the quality characteristics of functional cookies made with potato peels (cortex layer) containing high amounts of glycoalkaloid. Cookies were processed by mixing ratios of 10, 15 and $20\%$ potato peel relatively to flour. The spread ratio of the cookies was increased with increasing potato peel addition. Texture measurement for the cookies on substituting $10\%$ of flour for potato peel showed a decreased hardness, but the cohesiveness and springiness were increased compared to the control and other ratios. The glycoalkaloid contents of the cookies on substituting 10, 15 and $20\%$ of the flour forpotato peel were 6.27, 9.40 and 12.54mg, respectively, which according to the USAD guidelines are safe amounts for the human body, and also enough for making functional cookies. In the sensory evaluations, the cookies with $10\%$ of the flour substituted for potato peel had the highest scores in flavor, taste, appearance and texture.

• Korean journal of food and cookery science
• /
• v.16 no.6
• /
• pp.681-688
• /
• 2000

This study was an attempt to use arrowroot, a common plant in Korea used as food to relieve famine, for making noodles and to set up a standard formulation for arrowroot-starch-containing noodle. Arrowroot starch was mixed with wheat flour at a different ratio and used to make noodles. Cooking quality and texture were measured, and sensory evaluation was performed with the noodles prepared. Water binding capacity of arrowroot starch was higher than that of wheat flour. Maximum viscosity of the composite arrowroot-wheat flours was increased as the arrowroot starch content increased as measured by amylograph. Addition of arrowroot starch at 10% level improved the quality of noodles. Texture measurement showed that the noodles of the composite flour containing 10% or 20% arrowroot starch were superior to those of wheat flour alone； however, the scores of arrowroot-con-taming noodles were similar to those of wheat flour alone in sensory evaluation.

• Korean journal of food and cookery science
• /
• v.17 no.3
• /
• pp.237-245
• /
• 2001

The purpose of this study was to develop a standardized recipe of Hwajeun(glutinous rice pancake with flower) by evaluating various methods appeared in the literature. For this purpose, the effects of the volume and temperature of water used to make dough on the sensory and rheological characteristics of Hwajeun were investigated. This experiment consisted of sensory evaluation in acceptance and intensity(appearance, color, moistness, softness, chewiness, adhesiveness, taste and overall preference), objective evaluation by using texture analyser, color difference meter and measurement of water content and oil absorption ratio. The loss ratio of moisture contents between dough and cooked Hwajeun were 2.4 ~2.8%, and the oil absorption ratio of Hwajeun made by 2$0^{\circ}C$water for kneading increased in proportion to the increment of water added(p＜0.01). In terms of color, b value of Hwajeun made by 104$^{\circ}C$ salted water for kneading showed higher value compared to the others. In the two bite compression test, adhesiveness, springiness, gumminess and chewiness of Hwajeun made by 2$0^{\circ}C$ water(36%) for kneading showed significantly(p＜0.05) high value among the samples. As a result of sensory evaluation, Hwajeun made with 27% of 104$^{\circ}C$ salted water for kneading was most preferred in softness, chewiness, taste and overall preference

• Korean Journal of Food Science and Technology
• /
• v.36 no.6
• /
• pp.924-929
• /
• 2004

Quality characteristics of functional bread added with different concentrations of potato juice and processed by basic formulation were investigated. Specific volume and baking loss of bread added with 20% potato juice (potato juice : water = 20 : 80) were the highest. Moisture and crude protein contents increased with increasing content of potato juice, while crude lipid content decreased. Lightness (L value) and yellowness (b value) of bread decreased with increasing content of potato juice, while redness (a value) increased. Texture measurement showed springiness, cohesiveness, and brittleness increased with increase of potato juice content. Highest sensory scores for color (p < 0.001), flavor, and taste (p < 0.05) were obtained from bread added with 20% potato juice, while appearance (p < 0.01) and texture (p < 0.01) of control bread were highest. Glycoalkaloid contentsof bread added with 50 and 100% potato juice were 2.85 and 5.79 mg%, respectively.

• Korean journal of food and cookery science
• /
• v.3 no.1
• /
• pp.20-30
• /
• 1987

Kyongdan is a kind of Korean rice cake made from glutinous rice powder. This study attempted to clarify the factors which affect the textural characteristics, and to examine the effects on sensory characteristics and texture of Kyongdan in various soaking time, temperature and volume of adding water in the preparation of Kyongdan. Evaluation was conducted through sensory evaluation and objective evaluation. The degree of gelatinization in various storage time and temperature were evaluated by $\beta$-amylase digestibility. The results were summarized as follows. 1. In preparation, the significant factors were the temperature and volume of water, number of kneading, condition of powder, and the relationships between soaking time and temperature of water and between volume and temperature of water and between volume of water and number of kneading and between volume of water and salt. 2. In sensory evaluation on the various soaking time and temperature and volume of water, the most favorite tendency on the overall quality was at the addition level of hot water of 25% with glutinous rice powder made by soaking for 12 hours. This condition corresponded to the low level of hardness, gumminess, chewiness and the high level of springiness and cohesiveness in comparision with Instron measurement. 3. The degree of gelatinization were decreased rapidly during two days of storage. In storage temperature, Kyongdan which was stored at $0^{\circ}C$, showed the most low level of the degree of gelatinization at the same storage time.

• International Journal of Highway Engineering
• /
• v.8 no.3 s.29
• /
• pp.77-88
• /
• 2006

The maintenance / repair of concrete pavements has become an issue as a result of increasing of concrete pavements' service year. Asphalt overlay is applied to the concrete pavements after partial repairs on all occasions. This thesis discusses the application standard, evenness, skid resistance, noise, economical efficiency, extension of life span, etc. of diamond grinding, a method of maintenance about concrete pavements. Based on this, it was applied to the field and measured the performance. It was measured the longitudinal evenness of before and after the construction through measurement equipment. and surveyed the skid resistance the each lane classified using the SN standard value. In case of noise, it is selected the kind of vehicle, velocity, then measured the noise between control and constructed site. In addition, it is evaluated the average texture depth. As a result of the analysis, longitudinal evenness is improved about $6{\sim}40%$, skid resistance is improved 66% at first section,37% at second section. Noise is reduced 3.4dB average, and average texture depth is 79% deeper than control section. Therefore, it can be concluded that diamond grinding is suitable as maintenance / repair method of concrete pavements.

• International Journal of Highway Engineering
• /
• v.6 no.1 s.19
• /
• pp.1-11
• /
• 2004

This study tries to propose the most effective pavement texture method through the performance evaluation of variable texture methods. Noise 2$\sim$3dB is reduced in the section of uniform space 18m longitudinal tinning. This result is proved by comparing the magnitude of noise in two sections. The noise of 26mm longitudinal firming section is greater than that of 18mm section by 2$\sim$3dB(A). The skid resistances measured in all test section show the reasonable results. The roughness or all the test sections satisfies AASHTO roughness standard (PrI 16cm/km). The result or questionnaire survey about driving quality shows that the longitudinal tinning is the most effective method. As the result of a visual measurement, it is proved that the section applied uniform space 26mm longitudinal tinning and the general section applied uniform space 26mm transverse tinning could drain water effectively. As the result of analysis with the ranking method, the 18mm longitudinal tinning in selected as one of the most effective tinning methods. In addition, 26mm longitudinal tinning, random space transverse tinning, and transverse drag are selected in order.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.1
• /
• pp.60-64
• /
• 1997

This study attempted to examine the effect on sensory characteristics and texture of Paeksolgi in various volume of adding sugar and steaming time. The most favorite tendency on the quality was over 15% adding sugar and 20 minute steaming time. Evaluation was conducted through objective evaluation firstly and sensory evaluation secondly. The volume of adding sugar was the significant factors which affected the textual characteristics of Paeksolgi. But steaming time and interaction had not affected. In sensory evaluation on the various steaming time Paeksolgi made by steaming time for 20min and over 15% adding sugar showed the most favorite tendency on the overall quality. This condition corresponded to the high level of hardness, adhesiveness, gumminess in comparison with Rheoner measurement. In summary the most favorite factor was 12 hours of soaking time, 10% adding water, 1% of adding salt, over 15% adding sugar, 20 minutes steaming time.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.6
• /
• pp.1032-1038
• /
• 2008

This study was conducted to develope carbohydrate-based fat replacement for use in the preparation of non-(trans) fatty acid and low-caloric bread. Characteristics such as leavening height of batter, pH, titratable acidity, specific volume, sensory evaluation, shelf life and texture change of bread made using 11 types of carbohydrate-based fat replacements were measured. The 11 carbohydrate-based fat replacers (No. $1{\sim}11$) were prepared using maltodextrin as a base, and different ratios of calcium sulfate, ascorbic acid, sodium stearoyl lactylate and methyl cellulose. The pH was lowered and the total titratable acidity was increased after four hours of fermentation in the control and the samples of dough that contained the fat replacement. In addition, the leavening height of the control was 5.0cm (maximum) after two hours of fermentation and 4.6 cm after four hours of fermentation, which was similar to the heights observed when No.$9{\sim}11$ were evaluated. When the specific volume of the bread was evaluated, the 3% of fat replacement No. 10 produced the best results. When taste was evaluated, there was no significant difference between the control and the bread produced using 1% No. 10, however, there was a significant difference between the control and all samples that contained 2% or more of the fat replacement. Furthermore, the addition of a greater concentration of the fat replacer resulted in a greater moisture. However, there were no significant differences in the color of the control and any of the samples. Additionally, measurement of the firmness of the bread during four days of storage at $25^{\circ}C$ revealed that it decreased as the concentration of fat replacer increased. In addition, the sample that contained 3% of sample No. 10 showed a firmness of 18kgf after three days of storage, while the control showed a firmness of 18kg after two days, which indicates that the degradation of the bread that contained the fat replacer was delayed by one day. The bread made using fat replacers was found to have a better taste, flavor, color, texture and firmness than the control, and the best results were observed in response to the addition of 3% of replacement No. 10. The results of this study will be useful in the production of non-(trans) fatty acid, low caloric bread.