• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.275-276
• /
• 2003

Electrostatic spinning or electrospinning has been recently paid attention to prepare ultrafine fiber mats which are composed of diameters in a range of submicrons to nanoscale size[l]. Due to small diameters and porous structure, electrosun fibers have a high specific surface area and expected to use for broad applications, such as filters, membranes, wound dressing materials, artificial blood vessels. a nonwoven fabric, a reiforcement of nanocomposites[2,3], etc. (omitted)

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.4
• /
• pp.432-442
• /
• 2012

This study investigated the practical use of educational subjects and contents of materials in the fashion industry field and analyzed all data from respondents depending on business area and years of work in order to develop appropriate educational methods and courses. The survey was conducted with 151 questionnaires; 148 responses were used in the data analysis. The statistical analysis methods were frequency analysis, factor analysis, and ANOVA. The factors of educational subjects for Clothing and Textiles were classified into three categories of product planning, manufacturing and basic information, and manufacturing-related subjects (including materials); subsequently, these showed a high practical use in the fashion business. There were significant differences in the practical use of educational subjects that depended on business areas and years of work for respondents. In the case of education of materials, the contents of fibers, knit fabrics and textile planning were used the most in various business areas; in addition, there were also significant differences in the practical use of knits, textile care, textile planning and trade, and textile retailing depending on business area.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2623-2626
• /
• 2012

A series of functionalized furans were synthesized by way of a palladium-catalyzed coupling reaction of 2,3,5-trisubstituted furans with aryl chlorides through C-H bond cleavages at C-4 position. The feature of the reaction was facilitative preparation of furan derivatives with good functional group tolerance. All reactions gave the desired products in moderate to good yields in the presences of $BuAd_2P$ and t-BuOK in DMF at $120^{\circ}C$ after 15 h.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.29-29
• /
• 2012

Rhodamine chromophore/fluorophore have been attracted to many researchers due to its excellent photophysical properties. In this study, we have designed and synthesized a strong emissive fluorescent dye chemosensor for toxic elements. A rhodamine-based sensor was prepared by incorporation the rhodamine fluorophore and several functional host groups with high affinity to hazardous metal and anion. This sensor shows a high selectivity and an excellent sensitivity and is a dual-responsive colorimetric and fluorescent metal/anion-specific sensor. In addition, the 1:1 binding mode was proposed based on Job's plot method. Finally, computational calculation was simulated and calculated to approach for HOMO/LUMO of this dye chemosensor.

• Fibers and Polymers
• /
• v.1 no.1
• /
• pp.32-36
• /
• 2000

An alternative strategy to .educe the percolation threshold of carbon black (CB) in polymer blends was investigated using random copolymer ternary blends of polystyrene (PS), poly(methyl methacrylate)(PMMA), and a styrene-methyl methacrylate random copolymer (SMMA). The target morphology was to selectively locate CB particles in the encapsulating layer of SMMA during melt mixing. The CB used in this study is BP-2000 from Cabot and has a strong selective affinity to PS. Even when the CB was premixed with SMMA, it moves to the PS phase during the melt mixing. However, we also observed the CB particles located at the interface between SMMA and PS phases. Through this study it is found that the interaction between polymers and CB particles is critical for selectively localizing CB particles in multi-component polymer blends. Although appropriate processing condition may retard the movement of CB particles to the polymer phase with affinity, it cannot prevent it completely and locate them to the SMMA phase, which is not thermodynamically favored. To locate CB particles in an encapsulating layer of ternary polymer blends, first of all, polymers forming it should have selective affinity to CB.

• Textile Coloration and Finishing
• /
• v.27 no.1
• /
• pp.11-17
• /
• 2015

Recently, super fiber reinforced composite materials are widely used in many industries due to high mechanical properties. In this study, 2 different types of composite materials were manufactured in order to compare their mechanical properties. Carbon and Aramid fibers were used for reinforcement materials and Bisphenol-A type epoxy resin was for matrix. Two kinds of fiber-reinforced materials were manufactured by RIM(Resin Injection Molding) method. Before manufacturing composite materials, the optimal manufacturing and curing process condition were established and the ratio of reinforcement to epoxy resin was discussed. FT-IR analysis was conducted to clarify the structure of epoxy resin. Thermal and mechanical property test were also carried out. The cross-section of composite materials was observed using a scanning electron microscope(SEM).

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2007.11a
• /
• pp.39-40
• /
• 2007

• Journal of Korean Home Economics Education Association
• /
• v.14 no.1
• /
• pp.39-54
• /
• 2002

This study was done to identify contents of clothing and textile education and to systemize its curriculum from elementary school to high school Every time the official curriculum is updated. the suggestion that the contents of Home Economics Education should be systematized never fails to come forth. Unfortunately. it's a fact that there are still insufficient grounds to base this opinion on. and that adequate research has not yet been done in this particular field. Therefore. basic research must be performed in order to systematize the substance of clothing and textile education. Keeping this in mind. the following study strives to find appropriate methods of conducting clothing and textile education, while attempting to provide basic materials for future organization and selection of contents. In order to achieve these goals. the materials have been sorted into three categories : First of all. what sort of concepts is being taught in the subject of clothing and textile. and are the chapters constructed so that different schools can maintain consistency among them\ulcorner Second, how has clothing and textile education been done so far and is the contents correctly synchronized with the students'development\ulcorner Third. haw is clothing and textile education utilized in real life. and has it actually been systematized in a way that encourages practical utilization\ulcorner This study has mostly been done through the research of various documental resources. Also. the analysis has been performed using the systematic contents analysis method. The main results of obtained this study are as follows : As the concepts of clothing and textile education. which are different from each school, has not completely been systematizied. Also. as the contents of clothing and textile education has not correctly synchronized with the students'development. am it has not actually been systematized in a way that encourages practical utilization. Since this study has touched only limited research on the topic of clothing and textile education. it is essential that further research covering a wider array of themes be done in the future.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.866-871
• /
• 1997

The com starch was treated with propylene oxide, 1,2-epoxybutane, glycidyl methacrylate, maleic anhydride, caprolactone, respectively, in order to alter the hydrophilicity and the reactivity of starch. When the starch was not dried, poor reaction was observed except the reaction with propylene oxide or maleic anhydride. The treated starches were grafted with styrene by several different polymerization methods. Solution polymerization and redox polymerization using cerium(IV) ion show poor grafting efficiency and poor yield. Encapsulation of starch with polystyrene by suspension polymerization was difficult due to the hydrophilicity of the starch. Among the examined methods, emulsion polymerization was found to be the suitable way to graft styrene onto starch.

• Journal of Sensor Science and Technology
• /
• v.27 no.6
• /
• pp.397-402
• /
• 2018

Proper seat design is critical to the safety, comfort, and ergonomics of automotive driver's seats. To ensure effective seat design, quantitative methods should be used to evaluate the characteristics of automotive seats. This paper presents a system that is capable of simultaneously monitoring body pressure distribution and surface deformation in a textile material. In this study, a textile-based capacitive sensor was used to detect the body pressure distribution in an automotive seat. In addition, a strain gauge sensor was used to detect the degree of curvature deformation due to high-pressure points. The textile-based capacitive sensor was fabricated from the conductive fabric and a polyurethane insulator with a high signal-to-noise ratio. The strain gauge sensor was attached on the guiding film to maximize the effect of its deformation due to bending. Ten pressure sensors were placed symmetrically in the hip area and six strain gauge sensors were distributed on both sides of the seat cushion. A readout circuit monitored the absolute and relative values from the sensors in realtime, and the results were displayed as a color map. Moreover, we verified the proposed system for quantifying the body pressure and fabric deformation by studying 18 participants who performed three predefined postures. The proposed system showed desirable results and is expected to improve seat safety and comfort when applied to the design of various seat types. Moreover, the proposed system will provide analytical criteria in the design and durability testing of automotive seats.