• 한국의류산업학회지
• /
• 제7권4호
• /
• pp.433-438
• /
• 2005

Seven commercial lining fabrics normally used in a market were selected: plain-weave fabrics with polyester, nylon, rayon and acetate fiber, and polyester textured yarn, in addition, polyester fabrics with plain, twill and satin weave. Then seam strength, seam efficiency, resistance to slippage of yarns and type of seam destruction were examined related to endurance by textiles in sewing capability of the lining fabrics. In results, as tensile strength was greater, seam strength got greater, which shows tensile strength and seam strength have close relationship. Tensile and seam strength of acetate fabric were the least, but seam efficiency was the greatest. It presents that strong tensile and seam strengths do not show high seam efficiency at the same time. Various types of seam destruction have been shown. When tensile strength of the sewing thread was greater than tensile strength of fabric, fabric destruction was occurred before the sewing thread destruction. When tensile strength of the fabric was greater than seam strength, the sewing thread destruction was occurred. Resistance to slippage of yarns got greater as tensile strength of the fabric got greater. The plain-weave fabric, which tensile strength of fabric was smaller, showed the greater resistance to slippage of yarns than twill and satin weave fabrics. The stretch fabric revealed the optimal lining fabric with the greatest resistance to slippage of yarns.

• 한국의류산업학회지
• /
• 제2권4호
• /
• pp.339-345
• /
• 2000

The effects of protease and/or lipase on the removal of protein soil and oily soil were investigated in this study. Cotton, rayon, nylon, and PET fabrics were soiled by padding of fresh bovine blood and spotting of mixed artificial sebum evenly. The soiled fabrics were aged at $130^{\circ}C$ for 30 minutes. The fabrics were washed by using Terg-O-Tometer at various conditions. Protease and/or lipase were added in the alcohol ethoxylate (AE) detergent solution. The removal efficiency was evaluated by analysis of protein and/or oil on the fabrics before and after washing, respectively. The detergency of protein and/or oil on the fabrics was discussed with enzyme concentration, washing time, washing temperature, pH of washing solution and fiber characteristics. The hydrolysis of protease improved effectively the removal of oil as well as protein by increasing removal of protein-oil mixed soil at the same time. The effect of lipase added detergent solution was slightly shown on the removal of oil and/or protein. The removal of mixed soils from cotton fabrics was very low because of large amount of residual soils caused by the physical characteristics of cotton fiber.

• 한국의류산업학회지
• /
• 제15권1호
• /
• pp.156-162
• /
• 2013

For the development of high quality textiles, silk fabrics were dyed repeatedly with persimmon juice by padding mangle. We evaluated the mechanical properties and hand value by Kawabata Evaluation system for dyed silk fabrics. The results obtained from this study were as follows. With the increase of repeating padding times of dyeing, the linearity load-extension curves of the silk fabrics were increased; however, the tensile resilience of fabrics decreased. The hysteresis values of shear force were increased without significant change of shear stiffness. The coefficient of friction values were also decreased and geometrical roughness values were increased. The silk fabrics dyed with persimmon juice had shown the thickness and weight grow as the number of padding increases. The hand values of silk fabrics which were classified into 6 items in the Kawabata Evaluation System, were evaluated as repeating times of dyeing with persimmon juice. The hand values of Koshi(stiffness) and Hari(anti-drape stiffness) were increased, whereas Shinayakasa (flexibility with soft feeling) and Fukurami(fullness and softness) were decreased by dyeing with persimmon juice. However there was no significant change in hand values according to repeating padding times of dyeing.

• 한국의류산업학회지
• /
• 제3권1호
• /
• pp.15-19
• /
• 2001

The purpose of this study was to determine the thermal characteristics of men's suits ensembles and their fabrics. For the study, 100% wool fabrics were woven with various fabric structure, fabric density and yam count and With the use of these, 12 men's suits were made with the same design. Physical characteristics that affect thermal transport properties, including drapery, cover factor; bulk density, keeping warmth ratio, vapor permeability, air permeability and porosity of the fabrics were measured. In addition, thermal resistance of men's suit ensembles, including Y-shirts, inner wear and socks was measured on the thermal manikin in the environmental chamber. The result of the study was as follows: 1. In terms of fabric structure, keeping warmth ratio of plain woven fabrics was higher than those of twill and satin woven fabrics and also, vapor and air permeability and porosity of plain woven fabrics were higher than those of twill and satin woven fabrics. 2. The result showed that thermal resistance of 12 ensembles were in the range of 0.77clo~0.97clo. 3. There was little correlation between woven condition such as, including structure, fabric density and yam count and thermal resistance of ensembles.

• 한국의류산업학회지
• /
• 제10권4호
• /
• pp.537-543
• /
• 2008

The purpose of this study was to evaluate the comfort and fabric hand characteristics of selected lining fabrics made of acetate and polyester. The comfort of the linings was determined by human subjects wearing suit blazers constructed with different lining materials in an environmental chamber controlled at $30.6^{\circ}C$ air temperature and 50% relative humidity. The hand characteristics of the lining fabrics were determined by five trained panelists using standard fabric reference samples. The effect of lining fabrics on the subjects' thermal sensations was not statistically significant. But the subjects voted warmer when wearing the polyester surah lined blazer or the polyester taffeta blazer than wearing the acetate blazers. The results of the subjective comfort evaluation indicated that, in general, the subjects rated the acetate linings significantly less sticky, clammy, damp, and non-absorbent than the polyester linings. Acetate surah was rated a little higher than the other acetate fabrics on these comfort descriptors. The results of the subjective hand evaluation indicated that the lining fabrics rated low on the geometric and mechanical hand characteristics and rated moderate on noise. Acetate surah scored the highest on most of the hand characteristics, whereas, polyester taffeta scored the lowest.

• 한국의류산업학회지
• /
• 제21권5호
• /
• pp.597-605
• /
• 2019

This paper examined the garment formability and appearance of perspiration absorption, fast dry, and breathable fabrics. The mechanical properties and seam pucker properties of these fabrics were measured and regression analysis was conducted between fabric structural parameters and their mechanical and seam pucker properties. The superior total appearance value (TAV) of fast dry knitted fabrics for sports-wear was achieved in fabrics with high extensibility and bending rigidity; consequently, it increased with increasing stitch density and tightness factor. The formability of the fast dry knitted fabric also improved with an increasing stitch density and tightness factor. The seam pucker was influenced by bending rigidity and a good seam pucker was exhibited in the fast dry knitted fabrics with low stitch density and tightness factor. However, the formability (F) of the breathable fabric improved by increasing extensibility and bending rigidity that decreased with an increasing cover factor and the thickness of the breathable fabric. In addition, seam pucker deteriorated with an increasing cover factor and the thickness of the breathable fabric, which was similar to the results of the formability predicted in fabric mechanical properties. A superior seam pucker was achieved in fabrics with high extensibility and low bending rigidity.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.402-403
• /
• 2003

Garment manufacture represents the final stage of processing a finished fabric. The main task of the garment manufacturer is to produce shell structures out of flat fabrics to match the shape of the human body, and the most acceptable means of joining textile materials for apparel use is by sewing. On the sewing process, the bottom layer is pushed forward by the feed-dog, but the presser foot tends to retard the passage of the top layer. Since the friction between the layers is low, is possible that the components will move out of phase and pucker. (omitted)

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.413-427
• /
• 2001

In this studs, we synthesized durable antistatic agents with acrylic monomers for preventing the electrification of static electricity which is one of defects of polyester fabrics. Also we synthesized quaternary ammonium salts which give antistatic property and crosslinking agents which make antistatic agents adhere to fiber. The treatment of synthesized antistatic agents on polyester fabric carried out at the condition of various concentrations, treatment times and temperatures. The antistatic property, handle characteristics and other properties of treated and untreated polyester fabrics were also investigated.

• 한국의상디자인학회지
• /
• 제3권1호
• /
• pp.15-31
• /
• 2001

Textile fabrication affected by consumer and selected by fashion designer. The textile fabrication has been made not only by introducing the newly developed fiber but also by modifying the existing textile materials to impart sensibility to them. Consumers choose but to their sensibility of textile material and fashion trend. On purpose in this research is find out have influence on textile image. Wool fabrics have been in use from early age in northern Europe. Recognition of the role of the morphological structure, surface properties, chemical composition, acid-base characteristics in the chemical treatment of wool led to quantum advances in the fields of setting, shrink-resisting, chemical modification, and internal fiber cross-linking. Mechanical finishing to develop the handle, drape, and surface characteristics of the fabric is at least as important as chemical or wet finishing. Result showed that to have variety sensibility and trend theme in wool fabrics are tweed, venetian, serge, gabardine and melton.

• 한국염색가공학회지
• /
• 제17권5호
• /
• pp.13-19
• /
• 2005

Dyeing and fastness properties of direct spun type PET microfiber fabrics have been investigated. The dye uptake of finer microfibers commenced at lower temperatures and showed faster rate of dye uptake. The build-up and wet fastness properties of disperse dyes on finer microfbers were relatively poor since the more dye was needed to achieve a given depth of shade due to the large surface area.