• 한국의류산업학회지
• /
• 제10권4호
• /
• pp.544-551
• /
• 2008

In this study, the colorants of Amur cork tree were extracted with boiling water. Chitosan crosslinked cotton fabrics have been dyed with aqueous extract of Amur cork tree and their dyeabilities on the fabrics were studied. Additionally the fastness to washing and light were also investigated. Cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye(Amur cork tree) by the chemical linking of chitosan to the cellulose structure. This process was applied by means of the conventional mercerizing process. The chitosan finishing and durable press finishing of the cotton fabrics occurred simultaneously in the mercerization bath. On the surface color change, the fabric of no-chitosan finished and no-mordanted has greenish yellow. The more crosslinked chitosan on cotton fabrics has the more turned down greenish on the surface color, as increasing the concentration of chitosan, greenish color turn down to the yellow close the 90o hue angle. In all sorts of fabrics, dyeability(K/S) is slightly affected by the number of manufacturing process and the concentration of chitosan. But only mercerized cotton fabric has higher dyeability (K/S) than mordant treated cotton fabrics. Wash fastness has little different results by each condition, but almost similar values. Light fastness was improved with chitosan treatment on cotton fabric.

• 한국염색가공학회지
• /
• 제26권4호
• /
• pp.283-289
• /
• 2014

This study describes the feasibility and optimization of reactive dyeing on bio treated cotton knitted fabrics. For this, cotton knitted fabrics distinctly with two different enzymes, alkaline Pectinases(Scourzyme $L^{(R)}$) and Pectate lyases(Bactosol Co. ip $liquor^{(R)}$). In this way by increasing the concentration and processing temperature, the access of enzymes towards the fatty and waxy substrate was found to be accelerated. To achieve higher absorbency and whiteness index, a series of experiments was carried out to assure that Pectate lyases enzymes possesses high access towards the fats and waxes at high temperature. To this end, cotton knitted fabrics was dyed without oxidative bleaching step. The Pectate lyases scoured and dyed fabrics showed less color difference when 2% dye shade is used. The fabrics pre-scoured with Pectate lyases showed good the light and washing fastness properties, compared to the conventional and Pectinases dyed fabrics. However pectinases enzymes showed lower activity at high temperature, caused poor wettability and whiteness index of fabrics. The improvement of the accessibility of enzyme to the pectin at higher temperature Pectate lyases treatment before dyeing was found to be useful for subsequent pectin degradation in cotton knitted fabrics.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.13-20
• /
• 2015

The self-cleaning properties of nano-zinc oxide on cotton fabrics have been investigated. The cotton fabric has been prepared by pad-dry method. The nano-zinc oxide was encapsulated in the polystyrene particle by mini-emulsion process prior used. The loading amount of zinc oxide particles into the mini-emulsion were various from 1% wt to 40%wt. The particles sizes of ZnO-encapsulated polystyrene mini-emulsion were determined using dynamic light scattering. It was showed that the particle size of the mini-emulsion was in the range of 124-205 nm. The topography and morphology of ZnO-encapsulated polystyrene which coated on cotton fabrics was observed using scanning electron microscopy. The crystal structure of ZnO-coated on cotton fabrics was explored by X-ray diffraction spectroscopy. The photocatalytic activities of zinc oxide were present through the self-cleaning properties. The presents of the zinc oxide on cotton fabrics significantly showed the improving of the self-cleaning properties under UV radiation.

• 한국염색가공학회지
• /
• 제19권1호
• /
• pp.31-36
• /
• 2007

There are several factors in the degradation of textiles. The crucial factors in textile weakening are humidity, dust, smoke, sunlight, microorganisms and so on. Especially silk fabrics are more susceptible to microorganisms than other fabrics, because they are mainly consisted of proteins. In this study, we investigated the activities for degrading casein and silk fibers with 2 strains, Bacillus cereus TX1 and Pseudomonas fluorescens TX 2, isolated from domestic museums. They were compared to those of standard control strains, Klebsiella pneumoniae and Staphylococcus aureus, usually used for the antibiotic test of fabrics. The caseinolytic activities of K. pneumoniae and S. aureus were higher than those of isolated strains. But in the cases of silk fiber degrading, B. cereus TX 1 showed the highest activity on both silk 1 and silk 2. Therefore, caseinolytic activities were not coincident with the activity to degrade silk fibers. All strains degraded silk 1(strength retention 100%) better than silk 2(strength retention 50%). It means that bacteria mainly participate in the early stage of degrading silk fabrics, but as time goes by, the importance of bacteria for degrading silk fabrics would decreased. Even though the importance of bacteria may decrease, controlling bacterial activity is necessary to preserve historic silk fabrics.

• 한국의류산업학회지
• /
• 제14권5호
• /
• pp.866-877
• /
• 2012

The natural dyeing of hanji cotton fabrics with guava leaf extract was investigated. The temperature and time of dyeing were $40^{\circ}C$ and $90^{\circ}C$ for eighty minutes, respectively. In addition, the dyebath has been set at pH 5. Sn pre-mordanted fabrics showed the highest K/S value. Regardless of dyeing temperature, K/S values were high when Al, Cu, Fe-mordanted fabrics were dyed in post-mordanting and Sn-mordanted fabrics in pre-mordanting. The dyeing equilibrium was shown at the fourth time of repeated dyeing. In the processing of hanji cotton fabrics, K/S value was high when hanji cotton fabric was treated with soybean milk at $90^{\circ}C$. Similar K/S value of dyeing was shown when fabrics were processed with chitosan, regardless of dyeing temperature. High K/S value of dyeing was seen when fabrics processed with gallnut tannin at 40. Fabrics dyed with acidic water extract showed yellowish color. Fabrics dyed with alkaline water extract showed reddish color, and fabrics dyed with ethanol extract showed greenish yellow color. In case of Sn-mordanted fabrics, the washing fastness level was between 3 to 4, and other dyed fabrics showed low fastness. The dry cleaning fastness also showed very excellent result with level 4-5. The rubbing fastness of the fabrics was better in dry rubbing than in wet rubbing. For the light fastness, all dyed fabrics showed low fastness. For antibacterial activity, the dyed fabrics with guava leaf extract showed 99.9% of high antibacterial activity. Hanji cotton fabric maintained certain deodorization in the state of raw fabric. All dyed fabrics showed higher UV protection rate than control fabric.

• 한국의류산업학회지
• /
• 제14권2호
• /
• pp.320-330
• /
• 2012

The natural dyeing of cotton fabrics with guava leaf extract was investigated. The temperature and time of dyeing are $40^{\circ}C$ and $90^{\circ}C$ for eighty minutes, respectively. In addition, the dyebath has been set at pH 5. Sn pre-mordanted fabrics showed the highest K/S value. Regardless of dyeing temperature, K/S values were high when Al, Cu, Fe-mordanted fabrics were dyed in post-mordanting and Sn-mordanted fabrics were dyed in pre-mordanting. The K/S value of dyeing fabrics could be increased with repetitive dyeing and mordanting. Compared to untreated dyed fabrics, the K/ S values of fabrics which had been treated with soybean milk, chitosan and gall nut tannin were increased. The changed surface colors of fabrics that were treated with soybean milk, chitosan and gall nut tannin were Y, YR and achromatic colors. Fabrics dyed with alkaline water extract showed reddish color. Sn-mordanted fabrics dyed with acidic water extract showed vivid yellowish color, and Cu-mordanted fabrics dyed with ethanol extract showed yellowish green color. In case of Sn-mordanted fabrics, the washing fastness was level 4. The dry cleaning fastness also showed very excellent result with level 4-5. The rubbing fastness was better in dry rubbing than in wet rubbing of the fabrics. For the light fastness, all dyed fabrics showed low fastness. For antibacterial activity, the powder of guava leaf extract and the dyed fabrics with guava leaf extract showed 99.9% of high antibacterial activity. All dyed fabrics showed higher deodorization and UV protection rate than control fabric.

• 한국염색가공학회지
• /
• 제29권4호
• /
• pp.181-194
• /
• 2017

The biodegradability of polylactic acid(PLA) fabrics was evaluated by two methods: enzyme and soil degradation. Three different enzymes were selected to evaluate. Degradation times were measured at optimal enzyme treatment conditions. Biodegradation by enzymatic hydrolysis was compared with soil degradation. As a result, biodegradation created cracks on the fiber surface, which led to fiber thickening and shortening. In addition, new peak was observed at $18.5^{\circ}$ by degradation. Moreover, cracks indicating biofragmentation were confirmed by enzyme and soil degradation. By enzyme and soil degradation, the weight loss of PLA fabrics was occurred, there through, the tensile strength decreased about 25% by enzyme hydrolysis when 21 days after, and 21.67% by soil degradation when 60 days after. Furthermore, the biodegradability of PLA fabrics by enzymatic and soil degradation was investigated and enzymatic degradation was found to be superior to soil degradation of PLA fabrics. Among the three enzymes evaluated for enzymatic degradation, alcalase was the most efficient enzymes. This study established the mechanism of biodegradation of PLA nonwovens, which might prove useful in the textile industry.

• 한국의류산업학회지
• /
• 제5권1호
• /
• pp.53-58
• /
• 2003

The stretch fabrics were made by the use of PTT[Poly(trimethylene terephthalate)] fibers and changes in their physical properties were analysed. Tenacity and elongation of D-1(PTT DTY) yarn were 3.32 g/d and 50.4%, respectively, while these of D-2(PTT+CDP DTY) yarn were 2.46 g/d and 32.1%, respectively. The tenacity of PTT-1 and PET-1 fabrics was similar, but the elongation of PTT-1 and PET-1 fabrics was 75% and 44%, respectively. Thus, the elongation of PTT-1 fabric was two times higher than those of PET-1 fabric. In addition, the elastic recovery at 20% elongation of PTT-1, PTT-2 and PET-1 fabric was 85.0%, 80.5% and 60.0%, respectively, indicating that so PTT-1 fabric showed better elastic recovery. The light, wash, and abrasion fastness of PTT-1 and PTT-2 fabrics were above Grade 3, Grade 4-5, and Grade 4-5, respectively. Therefore, there was little effect of substance on the fastness.

• 한국의류산업학회지
• /
• 제4권3호
• /
• pp.289-292
• /
• 2002

'Burn-Out' is a kind of printing process that can create many textural effects, also high added value of the fabrics. In the previous studies, it is examined how to burn out the cellulose part of the velvet and the polyester/cellulosic fiber mixed fabric without damage of the other part and the effects of process conditions. In this study, dyeing properties of the colored burn-out printing were investigated with various conditions onto the polyester/cellulosic fiber mixed fabrics with red disperse dye. As a results, the apparent color depth (K/S) is increased with increasing of concentration of dye. The optimum treatment conditions without any shrinkage or occurrence of yellowness on the polyester ground fabrics are fixation temperature of $140^{\circ}C$ and time of 3 minutes.

• 한국의류산업학회지
• /
• 제11권3호
• /
• pp.465-468
• /
• 2009

In this study, acid cellulase was used to treat denim fabrics by varying pH, temperature, enzyme concentration, treatment time and non-ionic surfactant (Triton X-100) concentration. Treatment condition was controlled based on the weight loss. The characteristics of enzyme-treated fabrics were measured in terms of tearing strength, stiffness, and color difference. The optimum conditions for cellulase treatment of denim fabric were pH 5.0, $50^{\circ}C$, 3% (o.w.f.), 90minutes. The weight loss did not change significantly with the addition of a non-ionic surfactant, but it improved when more non-ionic surfactant were used. The tearing strength of enzyme-treated denim fabrics did not deteriorate. The stiffness of the treated fabrics improved with the enzymatic treatment with and without the non-ionic surfactant. The difference in color of fabrics treated with enzyme increased.