• Textile Coloration and Finishing
• /
• v.34 no.2
• /
• pp.93-101
• /
• 2022

In this study, the dyeing properties of supercritical fluid dyed cotton fabrics were investigated which use two types of dyes, such as C.I. Disperse orange and C.I. Disperse red 167. Dyeing temperature, pressure and leveling time were equally applied at 130 ℃, 250 bar, and 60 minutes with reference to the related literature, and experiments were performed at concentrations of 0.04, 0.1, 0.4 and 0.8 % o.w.f with different concentrations. Dyeability was confirmed through measurement of washing fastness and color coordinate, and a calibration curve of each dye was drawn up and the absorbance of the residual dye was measured to confirm the amount of residual dye and the dye exhaustion rate at the corresponding concentration. As a result of color difference measurement, as the concentration increased, the L^* value decreased and the K/S value increased. However, as the concentration increased, the increase in K/S value decreased compared to the input amount, and this tendency was more obvious in C.I. Disperse red 167 than in C.I. Disperse orange 155. The dye exhaustion rate which was calculated by using the amount of residual dye in the pot was also C.I. Disperse orange 155 was 96.16 % and C.I. Disperse red 167 was 94.57 %. However, as the dyeing concentration increased, the dye exhaustion rate decreased, that C.I. Disperse orange was 95.33 % and C.I. Disperse red 167 was 90.63 %. As a result of the washing fastness test for both dyes, dyed samples of which concentrations were 0.4 and 0.8 % o.w.f decreased by 0.5 ~ 1.0 grade. This is predicted because the dye did not completely adhere to the amorphous region of the cotton fiber and the dye simply adsorbed. The fastness to rubbing also maintained at least grade 3-4 up to the 0.1 % o.w.f concentration, but at the concentration of 0.4 % o.w.f or higher, it fell to grade 1 or lower, showing a very poor friction fastness.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.3 s.151
• /
• pp.412-424
• /
• 2006

This paper starts out with a review of the concepts of naturalism and natural clothes. Based on these concepts, the paper aims to create nature-friendly and high-value modem designs by grafting natural images from butterflies into human bodies. The images of butterflies are combined to show distinguished luxury and diversity with natural materials such as denim. As for the design technology, Adove Illustrator 10, Photoshop 7.0, and Prima Vision Textile Design System are used since they are very popular in the CAD system. The followings are the main findings of our research. Naturalism displays its objectivity based on its inherent interest in human nature and its factual description in scientific approaches with an intention to find a true meaning of human life in nature. Natural clothes can be defined as the clothes of natural silhouette which are made of pure materials in natural colors and dyes from natural motifs such as animals, plants or natural phenomena. We have realized that the visually distinguished looks of butterflies are indeed far more luxurious than those of any other insects and this visual distinction can be utilized to attract the attention from designers. Lastly, it turns out that the digital printing technique can create more variety in colors and design forms than the manual printing, thereby providing designers with more options and practicality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.527-533
• /
• 2017

As the clothing industry has advanced, dyeing technologies using various dyes have been developed. In recent years, interest in natural pigments has been increasing because of the negative impact of synthetic pigment on human health; therefore, development and application of microbial pigments is demanded. In this study, the dyeing effects on multifiber fabrics and biological activity were assessed using violet natural pigment from the marine bacterium, Microbulbifer sp. PPB12. The violet pigment produced by cultivation of Microbulbifer sp. PPB12 using Marine broth 2216 for 3 days was extracted using ethanol. Once dissolved in 20% ethanol, the violet pigment could be used to dye bleached cotton, diacetate, and especially polyamide. The optimal temperature, time, pH, and bath ratio under the dyeing conditions were $80^{\circ}C-90^{\circ}C$, more than 1 hour, pH 4-6, and 1:25, respectively. The mordant treatment was more suitable for color expression when $Na_2SO_4$ was used after 10 minutes of dyeing, but no significant difference was observed from untreated samples. The violet pigment also showed antibacterial activity against B. subtilis. The results of the present study indicate that the marine bacterial pigment could be an alternative for textile dyeing as a natural dye with antibacterial activity.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.184-188
• /
• 2008

This study presented simple and efficient fabrication of chemical sensors for the detection of acidic gas using 1,3-bisdicyanovinylindane as an indicator because it can be promising materials having property of the rapid color change according to the variation of pH. The dissociation of proton and dye in acidic condition as changing of ion pairs give rise to dramatically change the absorbance intensity of 1,3-bisdicyanovinylindane, which can be easily applied to the development of chemical sensors. In addition, indicator dyes having negatively charge in aqueous phase can be easily fabricated using layer-by-layer (LBL) methods by way of electrostatic interaction. For the proof of concept, we demonstrated the abrupt presentation of skeleton symbol on the chemical sensor, which could be resulted from the reaction of 1,3-bisdicyanovinylindane as background color with acidic gas. Thus, the rapid appearance of symbol will induce user's caution under the emergency condition. The presented chemical gas sensor using 1,3-bisdicyanovinylindane have strong advantages. First, the fabrication process of gas sensor was very simple and low-cost. Secondly, sensors reacted by acidic gas could be reused for several times. Finally, the chemical gas sensor would be environmentally friend, which can be a basic tool for the realization of eco-organic sensor device.

• Textile Coloration and Finishing
• /
• v.14 no.1
• /
• pp.1-10
• /
• 2002

The aim of study was to elucidate dyeability and antimicrobial and antifungal activity of silk fabrics dyed with Sophora Radix extracts according to different mordants. Dyes were extracted from Sophora Radix using ethanol. Then, silk fabrics were dyed with extracts two times by post-mordanting method in which the extract was 60%(owf), the mordant was 3%(owf), L.R was 1:20, the temperature was $60~60^\circ{C}$, the time of dyeing was 60min., and the time of mordanting was 60min. The dyeability was evaluated by surface color, K/S values and durability of dye. The skin microorganisms used in this study was S. sureus, B. subtilis, S. epidermidis, P. acnes, P. aeruginosa, E coli, A. niger, C. albicans and T. mentatrophytes. The results are as follows; 1. When mordants were added, K/S value of silk dyed was not improved much and surface color was 2.2Y to 8.8Y in H(hue) value which indicated greenish yellow to raddish yellow 2. The color fastness tests to light, perspiration, dry-cleaning, rubbing, and stain fabric washing show 4~5th degree which were valuated excellent. The color fastness to fade washing was improved to 3~4th degree by addition of $K_2CrO_7$ mordants. 3. Antibacterial activity of silk dyed using no-mordant as well as mordants was excellent on S. aureus, B. subtilis, S.epidermidis and P.acnes, but showed poor antibacterial activities on P.aeruginosa and E.coli such as gram negative baterials 4. Antifungal activity of silk dyed with ethanol extracts was good on A.niger, C.candida and T.mentagrophytes. Especially, on T. mentagrophytes there was no growth of fungus during 72 gous in silk dyed mordanting with $SnCl_2\cdot{2H}_2O$.

• Textile Coloration and Finishing
• /
• v.22 no.4
• /
• pp.341-348
• /
• 2010

Sodium sulfate is commonly added in reactive dyebath in order to increase substantivity of the reactive dye to cellulose fiber by reducing repulsion between anionic dye and fiber. While sodium sulfate is mostly used in solid form, it is inconvenient to dissolve a large amount of powder sodium sulfate. Furthermore, if there is undissolved salt in dyebath it might cause unlevel dyeing. In this study, sodium sulfate in liquid or solid form was used in dyeing of cellulose fabric with reactive dyes of three primary color and the effect of type or amount of sodium sulfate on dyeing and fastness properties was investigated. When the amount of sodium sulfate rose to 30-50 g/l, K/S value of the dyed fabric markedly increased; further rise in sodium sulfate concentration resulted in slow increase in K/S value. For light color, optimum amount was about 30 g/l in solid form and 50-100 g/l in liquid form while, for medium to deep color, it was 50 g/l and 100-150 g/l in solid and liquid form, respectively. When using each optimum amount of salt in solid or liquid form for medium color, shape of dyeing curve as well as exhaustion was similar to each other. On the whole, similar color fastness results were obtained regardless of type or amount of sodium sulfate.

• Textile Coloration and Finishing
• /
• v.11 no.2
• /
• pp.19-26
• /
• 1999

Strains degrading and decolorizing acid dyes, Nylosan red E-BL 150%. were isolated from natural system, was named as ARK3. The optimal culture conditions of temperature and pH were $35^\circ{C}$, 7.0, respectively. Growth rate of cells in conditions of aerobic shaking more than standing culture conspicuously increased, and optical density of those to strain ARK3 were found as 1.38 and 0.25 after 42 hrs. Decolorization efficiency in batch culture which used as immobilization media to natural zeolite was 15% after 6 hrs, while suspension culture was 5%, also its of immobilization and suspension culture were 90% and 85% after 48 hrs, respectively. Decolorization efficiency of air-lift bioreactor was more than 90% to a dilution rate of $0.038hr^{-1}$, but that was decreased as 70%, when the dilution rate was $0.05hr^{-1}$. Even though at maximum dilution rate of this study, there was not appeared "wash out" phenomienon of biomass. Decolorization efficiency was 97.7% at a dilution rate of $0.025hr^{-1}$, when influent dye concentration was $100mg/\ell$. But if influent dye concentration increased as $150mg/\ell$, even though MLVSS increased, that of treatment water decreased as 93%. Also, when influent dye concentration increased as $200mg/\ell$ and $300mg/\ell$, decolorization efficiencies of treatment water abruptly decreased as 85% and 63%, respectively. Decolorization efficiency was more than 92% to the limit volumetric loading rate of $3.75mg/\ell\cdot{hr}$hr, without regard to variation of influent dye concentration or hydraulic retention time. if volumetric loading rate was more than $3.80mg/\ell\cdot{hr}$, at same condition, decolorization efficiency was lower decrease of retention time than increase of influent dye concentration.entration.

• Textile Coloration and Finishing
• /
• v.26 no.2
• /
• pp.88-98
• /
• 2014

This study is to assess the photocatalytic degradation of PET and Nylon 6 films containing nano-sized $TiO_2$ powders of anatase and rutile types. The PET and Nylon 6 films containing six kinds of the nanoparticles were prepared by melt casting method using a heating press machine. Reflectance in visible region and water contact angles of the irradiated PET and Nylon 6 composite films decreased with increasing UV/$O_3$ irradiation. Also the enhanced hydrophilicity has a close relationship with the increase in the Lewis base parameter, which indicates more oxidized polymer surfaces. The photocatalytic degradation of the nanocomposite films increased with increasing $TiO_2$ content and UV energy, which is more significant with the anatase types rather than the rutile types. The amide linkages in the Nylon 6 seemed to be more susceptible to the UV light compared to the ester groups in the PET, particularly in the presence of the $TiO_2$ photocatalysts. The photoscission and photodegradation of the polymers in the composites produced more degraded structure assisted by the photocatalytic activity of the $TiO_2$ nanoparticles. Also the composite films can bleach the methylene blue dyes more easily under the UV/$O_3$ irradiation, suggesting the photobleaching activity of the $TiO_2$ nanoparticles.

• Textile Coloration and Finishing
• /
• v.25 no.4
• /
• pp.254-261
• /
• 2013

In this study, we synthesized a new fluorescent polypyridyl dye 2 containing a 2,2'-bipyridine in the center and two 2,2':6',2"-terpyridines at both ends. When exposed to various metal ions, the dye 2 showed selective fluorescence responses. In the presence of $Cu^{2+}$ and $Ni^{2+}$, it exhibited a highly effective fluorescence quenching, leading to large $K_{sv}$ values of up to $10^5$. In response to most other metal ions including $Al^{3+}$, in contrast, its fluorescence changes little, showing a small Ksv value at $10^2$. Meanwhile, the compound 2 revealed a differentiated fluorescence response to $Zn^{2+}$, which is evidenced by a large red shift of > 100 nm. Such a red shift from the ion binding is attributed to the planarization of the bipyridyl unit extending the effective conjugation length in conjunction. A polypyridyl compound will find important usefulness in chemosensor application due to its selective binding to metal ions. Subsequent research concerned with modified derivatives is currently going on, as a way to provide high solubility even after metal-complexing.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.208-218
• /
• 2016

This study investigated the effects of the working mechanisms of proteins, mordants, and dyes, as well as the mordanting order, on dye uptake by silk fabric pre-treated with proteins and dyed with freeze-dried sappan wood water extract. Soybean protein and sodium caseinate were used as the proteins. 1. When Al mordants were not used, the dyeability of the fabrics increased upon protein pre-treatment as compared to the case without treatment. 2. Dyeing with protein pre-treatment, followed by mordanting, led to the highest dye uptake, and the optimal protein concentration was 5%. 3. The K/S values slightly decreased with an increase in the dyeing temperature, and the fabric turned dark red in color when dyeing was carried out at increasing temperature. Fabrics showed the highest dye uptake at $40^{\circ}C$. 4. Regarding the effect of time, the K/S values of the fabrics with and without protein treatment showed almost no increase after the initial dyeing time of 10min; further, there was hardly any difference in the cases with and without protein pre-treatment. 5. In case of protein pre-treatment fabrics, the washing fastness was level 2. The dry cleaning fastness showed very excellent result with level 4-5. The rubbing fastness was better in dry rubbing than in wet rubbing of the fabrics. For the light fastness, all dyed fabrics showed low fastness.