• 대한소아치과학회지
• /
• 제40권3호
• /
• pp.223-232
• /
• 2013

치의학 연구에서 사용되는 귀무가설 유의성 검정에서 p값을 기준으로 연구의 결과를 평가하는 것은 많은 문제점을 내포하고 있다. 귀무가설이 기각되지 않은 경우에 귀무가설이 옳다는 결론을 내리는 것은 논리적 오류이다. p값에 대한 중대한 오해가 많이 있으며 연구자는 논문을 작성할 때 p값의 해석에 신중해야 한다. 귀무가설검정을 보완하거나 대체할 수 있는 대안으로서, 효과 크기, 신뢰구간, 베이지안 통계 등이 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1629-1630
• /
• 2001

The high voltage measuring systems used in the testing systems shall be required to maintain the traceability to the national or international standards by the IEC 60060-2. Also all testing laboratories should prepare the documents evaluating the measurement uncertainty of the tests. By the way, this paper introduces the principal of IEC about the maintenance of traceability and evaluation methode of uncertainty.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 봄 학술발표회 논문집
• /
• pp.114-119
• /
• 1992

The main disadvantages of destructive testing methods are the delay in obtaining test results, the relatively high cost of testing, and the lack of reproducibility in the test results. As a result, nondestructive testing methods are generally used. There are three objectives in this paper. The first is to determine the equations of the compressive strength of concrete estimated by Schmidt hammer technique, ultrasonic pulse velocity method and combined method respectively in laboratory. The second is to determine the correction factors according to the concrete age which affects most in evaluating the compressive strength of in-situ concrete. The third is to examine the applicability of the equations to evaluation of the compressive strength of in-situ concrete structures.

• 한국초등과학교육학회지:초등과학교육
• /
• 제27권1호
• /
• pp.49-59
• /
• 2008

The purpose of this study was to invent a quotient equation which could quantitatively evaluate individual's hypothesis evaluating ability. The equation was induced by the analysis of the classification types about hypothesis evaluation knowledges generated by 15 pre-service elementary school teachers and the construction of the quotient equation on hypothesis evaluating ability. The hypothesis evaluation task administered to subjects was dealt with the woodpecker behavior. The task was initiated by generating hypothesis on the following question: 'Why don't woodpecker have brain damage after pecking wood?' Subjects then were asked to design and perform experiments for testing hypothesis. Finally they were asked to evaluate their own hypothesis based on the collected, analyzed and interpreted data. The knowledges generated from their evaluating hypothesis were analyzed by 4 major categories (richness, type, level and accuracy). Then, a general equation which could quantitatively and systematically evaluate individual's hypothesis evaluating ability was invented by an inductive process. After combining all the categories the following quotient equation was proposed; '$VQ\;=\;{\sum}(TE_n\;{\times}\;AE_n)\;{\times}\;LE$'. According to this results, woodpecker task and hypothesis evaluating ability quotient equation (VQ) which invented in this study could be applied to a practical use of measuring students' ability of scientific hypothesis evaluation.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권3호
• /
• pp.46-50
• /
• 2008

The present status and future prospects of the levitation mass method (LMM), a technique for precision mass and force measurement, are reviewed. In the LMM, the inertial force of a mass levitated using a pneumatic linear bearing is used as the reference force applied to the objects being tested, such as force transducers, materials, or structures. The inertial force of the levitated mass is measured using an optical interferometer. We have modified this technique for dynamic force calibration of impact, oscillation, and step loads. We have also applied the LMM to material testing, providing methods for evaluating material viscoelasticity under an oscillating or impact load, evaluating material friction, evaluating the biomechanics of a human hand, and generating and measuring micro-Newton-level forces.

• 한국분무공학회지
• /
• 제29권1호
• /
• pp.1-6
• /
• 2024

This paper is a numerical analysis study for evaluating the energy efficiency of electric vehicles. Currently, the methods for testing and evaluating the energy consumption efficiency of electric vehicles have limitations such as resources and time. Therefore, there is a need for research on developing models to predict the energy consumption efficiency of electric vehicles. In this study, a numerical analysis research is conducted to predict the energy efficiency of electric vehicles using a vehicle dynamics numerical analysis model. To validate the accuracy of the simulation model, it is compared the results of dynamometer tests with the simulation results and used the Unified Diagnostic Services (UDS) protocol to acquire internal data from the electric vehicle. It is ensured the reliability of the simulation model by comparing data such as motor speed, battery voltage, current, state of charge (SOC), regenerative braking power generation, and total driving distance of the test vehicle with dynamometer test data and simulation model results.

• 한국물환경학회지
• /
• 제31권1호
• /
• pp.49-54
• /
• 2015

Acute toxicity test with Daphnia magna has a variety of factors such as incubation condition of test species, food quality and proficiency of laboratory workers. Therefore, proper proficiency testing samples were required for evaluating the competence of laboratory workers. This study aims to propose some appropriate proficiency testing samples for laboratory workers of acute toxicity test with Daphnia magna. Proposed four kinds of standard samples (Sample A, B, C, and D) for proficiency testing were selected from reference materials which were recommended from Canada and USA WET(Whole Effluent Toxicity) authorities. Proposed standard samples were tested by trial application of proficiency testing, homogeneity and stability checks using repeatability test. Sample A, C and D were estimated ad the suitable candidates for proficiency test standard samples except for Sample B. In addition, Sample A was proved to be the most suitable sample.

• International Journal of Safety
• /
• 제7권1호
• /
• pp.10-14
• /
• 2008

For evaluating the radiation degradation of cross-linked polyethylene (XLPE) cable insulation due to the irradiated oxidation, XLPE was irradiated with ${\gamma}$-ray. For each irradiated samples, TGA, DSC, FT-IR, and tensile tests were carried out. Regarding radiation degradation, oxidative process was predominant. TGA, DSC and FT-IR can be useful tools for evaluating the radiation degradation due to the irradiated oxidation because these analyses need only small amount of samples. The results of TGA, DSC and FTIR analyses showed the similar tendency for irradiated degradation. They can be useful tools for evaluating the oxidation of insulating material by non-destructive testing.

• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.64-72
• /
• 1998

This paper was undertaken to develop the fracture toughness testing method using small and single specimen compared to the conventional method in evaluating elastic-plastic fracture toughness of the superconducting magnet structural material at cryogenic temperature. The elastic-plastic fracture toughness test was conducted by using the unloading compliance method recommended by ASTM E813-89 to accomplish the above purpose. And, the 20% side-grooved 0.5TCT and 1TCT specimens were used to evaluate the fracture toughness by using as possible as miniaturized CT specimen. The unloading compliance method was a very useful method in evaluating elastic-plastic fracture toughness at cryogenic temperature. It could be taken valid fracture toughness values by using 20% side-grooved 0.5TCT specimen recommended by ASTM E813-89.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2002년도 춘계학술발표회 논문집
• /
• pp.78-85
• /
• 2002