• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.560-564
• /
• 1999

In general, the main dielectric materials for EHV electric appliances were epoxy, EPDM and Silicone rubber. The Silicone rubber has been rosed so many among them in EHV appliances in the worldwide, especially in Europe and North America. The reason why it is very stable in the thermal, mechanical and electrical environment. Therefore it is still becoming increasingly widespread in the application of the EHV appliances as a main dielectric material. On this study, investigated about real appliances and tested on basic properties of the Silicone rubber compared to organic dielectric material that is EPDM. At the result, the Silicone rubber is more dominant as main dielectric material for EHV appliances than any other organic polymers.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2480-2482
• /
• 1998

In this paper, the implementation of dual rate ADPCM using G.723 16Kbps and 40Kbps speech codec algorithm is handled. For small signals, the low rate 16Kbps coding algorithm shows the same SNR as the high rate 40Kbps coding algorithm, while the low rate 16Kbps coding algorithm shows the lower SNR than the high rate 40Kbps coding algorithm for large signal. To obtain the good trade-off between the data rate and synthesized speech quality, we applied low rate 16Kbps for the small signal and high rate 40Kbps for the large signal. Various threshold values determining the rate are tested for good trade off data rate and speech quality. Also the low pass filter effect of speech input and output devices is simulated at several cut-off frequencies. To simulation result shows the good speech quality at a low rate comparing with 16Kbps & 40Kbps.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1439-1441
• /
• 2000

In this paper, for IGBT inverter of electric car studied new vibration test method. It made a partial amendment of the existing standard. Using new vibration test method is tested actually IGBT inverter. The result on vibration test for IGBT inverter shows an excellent performance.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1551-1553
• /
• 2000

Superconducting power cable is one of the most promising energy application of high-$T_c$ superconductors (HTS). A prototype HTS cable have been constructed multi-layer cable using Bi-2223 tape and tested. The result shows that the total transport current of HTS cable in $LN_2$ was 475[A], and transport current passed through almost the outer layer (2-layer). Also, AC transport losses in outer layer of HTS cable was proportion to $I^2$ and higher than losses of inner layer. As magnetic distribution were concentrated on outer layer.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2086-2088
• /
• 2000

Key elements of in the development Electro-Thermal-Chemical propulsion (ETC) are high current pulse shaping, switching and storage bank device with high energy density 300kJ pulse power capacitor bank module for ETC application is designed and fabricated. The tested result are described.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.99-100
• /
• 2019

Water repellent and waterproofing agents fail to act work properly if cracks or detachment occurs outside. The method of making mortar was tested by classifying it into two methods: direct water-repellent put in concrete and water-repellent spray to sand method. It was found that the compressive strength was decreased as the amount of water repellent was increased. As a result of measuring the contact angle, all of the specimens were hydrophobic. The spray method showed greater water repellent effect than the direct mixing method.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.12-13
• /
• 2019

The bearing capacity of the wall against the eccentric load when the washbasin was attached on the ALC block wall was tested. Test methods are BS EN 14688 and BS 5234-2. Tests in accordance with BS EN 14688 showed that the holding capacity of steel was much stronger and more stable when HA-II (chemical anchor) was used than when the washbasin was fixed using HA-I (plastic anchor). As an experimental result according to the Annex K of BS 5234-2, the bearing capacity of ALC block wall corresponded to the "stage in which the force works(performance grade) 1,500N" for all of the cases where a washbasin is fixed using two types of the wall's dedicated anchors(HA-I and HA-II).

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.166-167
• /
• 2015

The purpose of this study is to examine the effect on drying shrinkage of self-healing epoxy-modified mortars(EPMMs) using expansive admixtures. The EPMMs are prepared with polymer-binder ratios of 0 and 10%, and tested for drying shrinkage and pore structure analysis. As a result, regardless of the expansion and swelling agent content, the drying shrinkage of the EPMMs is remarkably decreased than that of unmodified mortars. Also, the pore size distribution of the EPMMs is moved to smaller size in comparison with unmodified mortars. In this study, the EPMM with expansive agent 7.5% and swelling agent 2.5% is recommended as a optimal mix proportion for reduction of drying shrinkage.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.21-22
• /
• 2014

The purpose of this study is to ascertain strengths and hardening rate of epoxy-modified mortar with wood-tar contents. The polymer-modified mortars (PMMs) using epoxy resin with wood-tar are prepared with various polymer-binder ratios of 1, 3, 5% and wood-tar contents of 0, 5, 10, 15 and 20%. The PMMs using epoxy resin are tested for compressive, flexural and tensile strengths and hardening rate of epoxy resin. As a result, the strengths and hardening rate under polymer-binder ratio 1% and wood-tar content of 5% are more excellent than those of other specimens.

• Journal of Digital Convergence
• /
• v.5 no.1
• /
• pp.17-25
• /
• 2007

This study aims to examine the relationship between job attitude and leadership style perceived by employees in a hospital. This study has two purposes; 1) to investigate the relationship between leadership styles and job attitudes[Organizational Commitment and Turnover Intention], 2) to verify the moderate effect of organizational support on the relationship between leadership style and job attitude. We examined the effect of critical leadership styles on the job attitude of employees in hospital organization. Hypotheses on four factors were tested for 7 hospitals. In order to test these hypotheses, survey questionnaires were sent to employees of hospital organization in Gyungbuk. As a result, the 185 available data were collected. Correlation analysis and regression had been performed and the results supported hypotheses. The results indicated that it was significant difference between each leadership style and job attitude. Also, organizational support was found to be positively moderated on job attitude.