• Journal of Sasang Constitutional Medicine
• /
• v.18 no.3
• /
• pp.145-154
• /
• 2006

1. Purpose This study was performed to find the objective Sasang Constitutional Diagnosis, The O-ring test is thought to be one of the several methods to classify constitution. But the O-ring test has several problems. I studied the Sasang Constitutional Diagnosis which is used by Pinch-Guage and Herb Drugs for alternative methods. 2. Methods I tested 89 person's grasping power with changing the medical herb which is exist on person's another hand. conclusion of the test was compared with that of QSCC II to confirm the significance of this study. 3. Results and conclusions Soyangin group, Taeumin group, Male Soyangin goup, Male Taeumin group and Male group have a significant result on converting grades statistically.

• Transactions of Materials Processing
• /
• v.9 no.6
• /
• pp.663-669
• /
• 2000

A material model has been presented, at the continuum level, for the representation of superplastic deformation coupled with microstructural evolution. The model presented enables the effects of the spatial variation of distributions of grain size to be predicted at the process level. The model has been tested under conditions of both homogeneous and inhomogeneous stress and strain by carrying out detailed comparison of predicted distributions of grain size and their evolutions with experimentally obtained data. Experimental measurements have shown the extent of the spatial variation of the distribution of grain size that exists in the titanium alloy, Ti-6Al-4V. It is shown that whilst not large, the variations in grain size distributions are sufficient to lead to the development of inhomogeneous deformation in test pieces, which ultimately result in localisation of strain and failure.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.3 s.234
• /
• pp.295-305
• /
• 2005

To improve the aerodynamic effciency of TR-E2, a new configuration so called TR-E2Sl was introduced. TR-2251 is composed of different wing airfoil section and T-tail shape compared with TR-E2. Wind tunnel test for TR-EBS1 had been performed by changing the incidence angles of wing and deflection angles of control surfaces such as elevator and rudder. Also the on/off effect of ventral fin attached underneath of AFT fuselage was tested. Test result showed that variations of wing incidence angle did not cause any severe differences in aerodynamic characteristics. Longitudinal and directional characteristics of TR-E2S1 show stable for the pitch and yaw motions. However, the lateral stability of TR-E2S1 is not stable for a certain control surface deflection.

• Journal of Mechanical Science and Technology
• /
• v.19 no.8
• /
• pp.1568-1575
• /
• 2005

The calculation of the transmission loss of the silencers with complicated internal structures by the conventional BEM combined with the transfer matrix method is incorrect at best or impossible for 3-dimensional silencers due to its inherent plane wave assumption. On this consideration, we propose an efficient practical means to formulate algebraic overall condensed acoustic equations for the whole acoustic structure, where particle velocities on the domain interface boundaries are unknowns, and the solutions are used later to compute the overall transfer matrix elements, based on the multi-domain BEM data. The transmission loss estimation by the proposed method is tested by comparison with the experimental one on an air suction silencer with perforated internal structures installed in air compressors. The method shows its viability by presenting the reasonably consistent anticipation of the experimental result.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.11 s.242
• /
• pp.1542-1550
• /
• 2005

This paper presents the numerical procedure for calculating non-uniform residual stresses based on relieved displacements obtained from incremental hole drilling. The relationship between the in-plane displacement produced by introducing a blind hole and the corresponding residual stress is established. Finite element calculations are described to evaluate the relieved coefficients required for the determination of non-uniform residual stresses. Validity of the proposed method has been tested through three axisymmetric test examples and two three-dimensional examples. As a result of . simulation on the test examples, it is found that this numerical procedure is well adopted to measuring non-uniform residual stress in the full hole depth range of the hole diameter from the surface. The accuracy of the hole drilling method with displacement measurement is discussed, comparing tile method with strain measurement

• Elastomers and Composites
• /
• v.48 no.3
• /
• pp.221-224
• /
• 2013

In this study, VOC analysis method of vehicle interior materials and parts treated to visible-light responsive photocatalyst was tested by sample bag filled with air instead of nitrogen. As a result, when analyzed VOC of vehicle interior materials and parts, sample bag filled with the nitrogen was not confirmed of effect reducing VOCs and formaldehyde. However, VOCs and formaldehyde of sample bag that was filled with air instead of nitrogen, decreased significantly. Reaction effect for visible light-responsive photocatalyst was confirmed that sample bag of vehicle interior materials and parts should be filled with air instead of nitrogen.

• Food Science of Animal Resources
• /
• v.32 no.2
• /
• pp.247-251
• /
• 2012

This study was carried out to investigate the applicability of the detection of central nervous system tissues (CNST) in beef by-products in retail market. Beef by-products including large intestine, brain, spinal cord, liver, lung, spleen and heart were purchased and tested for the presence of CNST using an ELISA method. The ELISA test was evaluated and showed a high correlation coefficient by a standard curve (R value = 0.999). Based on the analytical instruction, the positive indication of the CNST contamination of brain and spinal cord was detected above 0.1% but large intestine, liver, lung, spleen, and heart was negative. Result suggests that the ELISA method is applicable to a real meat system and may provide a method to ensure confidence for consumer against bovine spongiform encephalopathy (BSE).

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1339-1341
• /
• 1994

In this paper, the flow velocity/mass sensor which is based on the principle of CCT(Constant Chip Temperature) and its digital operating circuit and system have been developed and tested. The experimental result for flow velocity shows that the sensitivity is $644.01{\mu}W^2/[m/sec]$ for air, and there is nearly no hysteresis for full measured range of velocity. Response tine is between 1 second and 8 seconds for low and large velocity variation, respectively.

• Journal of Korean Physical Therapy Science
• /
• v.18 no.4
• /
• pp.73-79
• /
• 2011

Purpose : This study is to know how position change in high-heels affects sacral tilt angle. 15 healthy women aged 21.87(standard deviation=3.54) were tested. Method : Lumbar and sacral tilt angle was measured by radiography barefooted, and after 15 mins of application time, they were measured in the same way in high-heels. Result : There was not notable difference in lumbar lordosis, lumbosacral angle, and sacral tilt angle. However, there was differences in change degree, which was measured by estimation data of [post-pre)/pre]${\times}$100. Conclusion : There was no notable difference in lumbar lordosis, lumbosacral angle, and sacral tilt angle, but as there were differences in change degree, research about how women's lumbar change when heel height increases is needed.

• International Journal of Contents
• /
• v.5 no.3
• /
• pp.33-39
• /
• 2009

This study tested a path model of agenda building examining the relationship among the media, the public and the presidential statements on the issue of drug abuse during the Bush administration's War on Drugs. The results showed that a dynamic and interactive relationship among aforementioned actors. First, the real-world conditions strongly increased both media coverage and presidential statements. Second, the news media and president influenced each other. Third, public concern, however, did not function as a significant factor in agenda-building process in this study. The result of this study indicates that Bush was not utterly a reactive or proactive president in terms of his relationship with the media. That is, news media and the president interacted regarding the drug issues; the relationship between President Bush and the media for drug issues was reciprocal.