• Korean journal of applied entomology
• /
• v.14 no.4 s.25
• /
• pp.199-204
• /
• 1975

One thousand forty-four isolates of Pyricularia oryzae obtained during the period 1962-1974 front blast-infected rice samples from all rice-growing areas of Korea were tested on the Japanese differential set of twelve rice varieties. Twenty-seven races of the fungus were differentiated. The number of races falling in groups T,C and N were 4, 15 and 8, respetively. Since only Japonica type varieties had been cultivated widely before 1966, N-race groups were found to be most Prevalent with a frequency of about $85\%$ of the total isolates. After 1966, T-and C-race groups gradually increased to $21\%$ and $42\%$ respectively, as a result of the widespread cultivation of Tongil bred from a cross between IR8 x(Yukara x T(N)1. Before 1966, a few T, and C-race groups occurred only in the Suweon region; since 1966, most of the races differentiated have been uniformly distributed throughout the country regardless of region. The most prevalent races in Korea were N-2 and C-8. The variety Tetep was resistant to all races previously identified in Korea, but a new race (T-d) to which Tetep is susceptible has been found each year since 1973. It appears likely that races capable of attacking Indica types of rice will become increasingly prevalent and a programme of continuous screening is needed to detect new races as soon as they appear.

• Korean Journal of Childcare and Education
• /
• v.9 no.5
• /
• pp.157-179
• /
• 2013

The purpose of this study was to examine psychological and behavioral characteristics of parents from low income families and to figure out the influence of these parents' characteristics upon children's problematic behaviors by comparing two-parent families and single-parent families. The subjects in this study were 193 parents who participated in a dream- start program geared toward low-income families. Their psychological and behavioral characteristics were tested, and their children's problem behaviors were investigated. As a result, the children from intact families in the low-income classes showed more problem behaviors when their parents faced heavier parental stress, and they showed less problem behaviors when their parents were more satisfied with their relationship with them. In contrast, the children from single-parent families in the low-income brackets showed less problem behaviors when their parents had better dietary habits and were more satisfied with their daily routine life, and they showed more problem behaviors when their parents were under heavier parental stress. The findings of the study seem to suggest that the development of parental and parent education programs is required to relieve the problem behaviors of children from the low-income classes and improve the parental behavior of their parents, and that a wide variety of assistance should be provided in consideration of the current marital status of parents as well.

• Journal of Digital Convergence
• /
• v.12 no.5
• /
• pp.159-169
• /
• 2014

The purpose of PMO (Project Management Office) systems implementation in public sectors is to prevent the potential risks of IT projects with the project management for the electronic government, and to improve the quality of the project. As a leading country in software areas, PMO systems will play an important role to lead the best smart electronic government in the global world. This study suggested an operating model of PMO systems in public sectors in advance to use the PMO systems in public sectors by conducting a research investigating the key organizational role as the major factor which affects the behavioral intention of PMO systems implementation. We tested a hypothesis that Effort Expectancy factors and Facilitating Condition among the interested party groups will influence the Behavioral Intention of PMO systems implementation, and the result have given no difference to the Control Effect among the interested party groups. This study have shown that the interested party groups have common recognition about the Behavioral Intention of PMO systems implementation in the public sectors.

• Korean Journal of Veterinary Service
• /
• v.34 no.4
• /
• pp.409-416
• /
• 2011

This study was performed to evaluate the microbial contamination level of meat processing in butcher's shops in Seoul from January to November in 2010. A total of 695 samples (112 cotton work gloves, 342 utensils and equipments, 241 meat samples) were collected and the environmental hygiene of 89 butcher's shops was investigated. The aerobic plate count (APC), E. coli and pathogenic bacteria such as Staphylococcus aureus, Salmonella spp. were tested in the samples. As a result, the level of count on APC ranged $0{\sim}2.2{\times}10^6\;CFU/cm^2$ from the utensils & equipments, $1{\times}10^2{\sim}2.7{\times}10^8$ CFU/glove from the cotton work gloves and $1{\times}10^2{\sim}9.3{\times}10^6$ CFU/g from the meat samples. The level of count on E. coli ranged $0{\sim}2.5{\times}10^3\;CFU/cm^2$ from the utensils, $0{\sim}8.6{\times}10^4$ CFU/glove from the cotton work gloves and $0{\sim}1.4{\times}10^5$ CFU/g from the meat samples, respectively. Staphylococcus aureus and Salmonella spp. were detected in 11 samples and 2 samples from the cotton work gloves, utensils & equipments, respectively. The sanitation standard operating procedure (SSOP) was applicated at 49 butcher's shops. In order to improve sanitation of meat in butcher's shops, in this study, applications of SSOP, systemic sanitation education for employees, hygenic control of utensils & equipments, and continuous monitoring for microorganisms will be required.

• Physical Therapy Korea
• /
• v.3 no.3
• /
• pp.1-11
• /
• 1996

The purpose of this study were to evaluate and compare the balance ability at different conditions in normal 20 to 29 years old on unstable platform, KAT 2000(Breg, Inc., Vista, CA. 1994). Static and dynamic BI(balance index) were measured 3psi and 5psi surface conditions. Static tests were done on right and left leg separately, then both legs together with the feet apart 20cm with the eyes opened and closed. Dynamic tests were done on both legs together with apart 20cm with the eyes opened. A dynamic test was performed in which the subject moved platform in a circular manner to chase a moving object on a computer screen. Seventy healthy students(average 21.6 years, male, female) were tested. In this study applied the paired t-test and correlation to determine the statistical significance of result. The results were as follow: 1) The mean static balance index of the Rt leg was $119.9{\pm}75.72$ on 3psi surface condition with the eyes opened, and that of the Lt leg was $224.3{\pm}121.16$. 2) The mean static balance index of the Rt leg was $93.1{\pm}24.16$ on 5psi surface condition with the eyes opened, and that of the Lt leg was $180.5{\pm}61.76$. 3) The mean static and dynamic balance index of both legs were $76.4{\pm}31.86$, $2187.6{\pm}696.99$ on 3psi with the eyes opened, and $68.3{\pm}14.82$, $1938.7{\pm}525.41$ on 5psi respectively. 4) The mean static balance index of the Rt leg was $517.8{\pm}220.87$ on 3psi surface condition with the eyes closed, and that of the Lt leg was $588.6{\pm}204.81$. 5) The mean static balance index of the Rt leg was $271.9{\pm}192.151$ on 5psi surface condition with the eyes closed, and that of the Lt leg was $363.4{\pm}98.97$. 6) The mean static balance index of both legs was $332.6{\pm}137.31$ on 3psi surface condition with the eyes closed, and that of the 5psi was $288.5{\pm}133.07$. 7) The balance index on 3psi surface condition was significantly higher than that of 5psi (p<0.05, p<0.01). 8) The balance index with the eyes closed was significantly higher than that of the eyes opened (p<0.05). 9) The balance index on the left leg was significantly higher than that of the right leg (p<0.05, p<0.01). 10) There was no correlation between static balance index and dynamic balance index. 11) Therewas no correlation between weight or height and balance index.

• Magazine of the Korea Concrete Institute
• /
• v.5 no.4
• /
• pp.123-134
• /
• 1993

A rapid progress has been made over last decade in the state-of-the-art earthquake structura1 engineering towards a better understanding of both the earthqauke ground motion and structural response. These efforts seek to ensure that there will be no serious injury or loss of life in the event of earthquake, and that structures can be built at minimum cost. The design of structures in general, concrete structures in particular, to resist strong ground input motions is not a simple matter, and analytical models for such structures must be developed from a design perspective that accounts for the complexities of the structural responses. The primary obj ective of earthquake structural engineering research is to ensure the safety of structures by understanding and improving a design methodology. Ideally, this would require the development of an analytical model related to a design methodology that ensures a ductile performance. For the accurate assessment of the adequacy of analytically developed model, experiments conducted to study the inplane inelastic cyclic behavior of structures should verify the analytical approach. The fundamental goal of this paper is to present and demonstrate experimentally verified analytical methods that provide the adequate degree of safety and confidience in the behavior of reinforced concrete structural components. This study further attempts to extend the developed modeling techruque for use by practicing structural engineers for both the analysis and design.Plication of the relaxed diaphragm through left thoracotomy was done and result was excellent as seen on Fig. 5. Cause of eventration of the left hemidiaphragm was due to paralysis of the left phrenic nerve which was tested during thoracotomy.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.259-266
• /
• 2012

A general earthquake resistant design philosophy of ductile frame buildings allows beams to form plastic hinges adjacent to beam-column connections. In order to carry out this design philosophy, the ultimate bond or shear strength of the beam should be greater than the flexural yielding force and should not degrade before reaching its required ductility. The behavior of RC members dominated by bond or shear action reveals a dramatic reduction of energy dissipation in the hysteretic response due to the severe pinching effects. In this study, a method was proposed to predict the deformability of reinforced concrete members with short-span-to-depth-ratios, which would result in bond failure after flexural yielding. Repeated or cyclic loading produces a progressive deterioration of bond that may lead to failure at lower cyclic bond stress levels. Accumulation of bond damage is caused by the propagation of micro-cracks and progressive crushing of concrete in front of the lugs. The proposed method takes into account bond deterioration due to the degradation of concrete in the post yield range. In order to verify bond deformability of the proposed method, the predicted results were compared with the experimental results of RC members reported in the technical literature. Comparisons between the observed and calculated bond deformability of the tested RC members showed reasonably good agreement.

• The Korean Journal of Financial Management
• /
• v.22 no.1
• /
• pp.119-146
• /
• 2005

This study applies extreme value theory to get extreme value-VAR for Korean Stock market and showed the usefulness of the approach. Block maxima model and POT model were used as extreme value models and tested which model was more appropriate through back testing. It was shown that the block maxima model was unstable as the variation of the estimate was very large depending on the confidence level and the magnitude of the estimates depended largely on the block size. This shows that block maxima model was not appropriate for Korean Stock market. On the other hand POT model was relatively stable even though extreme value VAR depended on the selection of the critical value. Back test also showed VAR showed a better result than delta VAR above 97.5% confidence level. POT model performs better the higher the confidence level, which suggests that POT model is useful as a risk management tool especially for VAR estimates with a confidence level higher than 99%. This study picks up the right tail and left tail of the return distribution and estimates the EVT-VAR for each, which reflects the asymmetry of the return distribution of the Korean Stock market.

• The korean journal of orthodontics
• /
• v.40 no.3
• /
• pp.184-194
• /
• 2010

Objective: The purpose of this study was to investigate the effect of tribochemical silica coating on the shear bond strength (SBS) of rebonded ceramic brackets using nano-filled flowable composite resin. Methods: A total of 60 premolars were prepared and divided into 4 equal groups as follows: Tribochemical silica coating (TC) + Transbond XT (XT), TC + Transbond supreme LV (LV), Sandblast treatment (SA) + XT, SA + LV. Treated ceramic brackets were rebonded on the premolars using each adhesive. All samples were tested in shear mode on a universal testing machine. Results: SBS of silica coated groups were high enough for clinical usage (TCLV: 10.82 $\pm$ 1.82 MPa, TCXT: 11.50 $\pm$ 1.72 MPa). But, SBS of the sandblast treated groups had significantly lower values than the tribochemical silica coated groups (SALV, 1.23 $\pm$ 1.16 MPa; SAXT, 1.76 $\pm$ 1.39 MPa; p < 0.05). There was no difference between the shear bond strength by type of adhesive. In the silica coated groups, 77% of the samples showed bonding failure in the adhesive. In the sandblast treated group, all bonding failures occurred at the bracket-adhesive interface. Conclusions: The result of this study suggest that newly introduced nano-filled flowable composite resin and tribochemical silica coating application on debonded ceramic bracket bases can produce appropriate bond strengths for orthodontic bonding.

• The Korea Journal of Herbology
• /
• v.20 no.3
• /
• pp.1-7
• /
• 2005

Objectives : In this study, Folium Perillae were examined the possibility to apply as the cosmetics natural materials. Methods : Normal skin softener containing Folium Perillae extracts was manufactured and then its physiological activities function was experimented on. And emollient lotion containing Folium Perillae extracts was manufactured and then it was left under the condition of $-10^{\circ}C,\;0^{\circ}C$, room temperature and $37^{\circ}C$ for a month. Then its stability and safety were tested. Results : The physiological activities function of the normal skin softener was almost same with the electron donating ability, SOD like activity and xanthine oxidase inhibitory effect of Folium Perillae extracts. To find the changes of emollient lotion containing Folium Perillae extracts, the emollient lotion was left under the condition of $-10^{\circ}C,\;0^{\circ}C$, room temperature and $37^{\circ}C$ for a month. Then, when the emollient lotion was observed with the naked eye, pH, viscosity and particle diameter were measured, its changes were not nearly found. Futhermore, as a result of doing patch test to identify the safety of emollient lotion containing Folium Perillae extracts, there was no stimulus on skin. Conclusions : From the above results, it was expected that the physiological activities of Folium Perillae extracts can be maintained when cosmetics containing Folium Perillae extracts are manufactured. And it was proved that Folium Perillae extracts didn't affect the change of cosmetic when they were applied to cosmetic materials. And it was concluded that emollient lotion containing Folium Perillae extracts was safe for skin.