• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.8
• /
• pp.898-907
• /
• 1992

This paper deals with a detailed analysis of CMOS latch up dependancies on the layout and geo-metrical demensions on the mask using same materials and same processes. For this purpose, six different layout models depending upon the N+ / P+ spacing and three different guard ring models have been gesigned, fabricated, and tested. As a result, common emitter current gain, shunt resistance, and holeing current versus N+/P+ spacing have been measured and analyzed experimentally. Also the fact that guard ring is sffective in reducing the latchup possibility has been verified through this study.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.10
• /
• pp.506-510
• /
• 2002

In this paper, we study on the mutual characteristics between transmitting efficiency of pulse energy and wall plug consumed power of non-thermal Plasma for removing environmental pollutive gas of coal plant. To obtain high pulse energy of our system, we used MPC(magnetic pulse compressor) of power switch and tested their characteristics by adjusting electrode length of reactor and charging voltage in capacitor. As a result, we obtained consumed power of wall plug and a compressed pulse of voltage 110kV, rising time 500ns. Impedance of load on increasing electrode length was decreased, but electrical efficiency was increased. These results indicate we can control critical voltage of pulse corona and electrical efficiency of economic cost in power plant.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.1
• /
• pp.13-19
• /
• 2001

This paper deals with decentralized control scheme and its application to multi-machine power systems. Decentralized control scheme has several practical advantages, because power system has geographically distributed characteristics. In this paper, decentralized observer-based optimal Power System Stabilizer(PSS) and Thyristor-Controlled Series Capacitor(TCST) controller are designed and tested in WSCC 9 bus system with one TCSC installed. Simulation results show that the proposed decentralized controller has satisfactory performances comparable to the centralized controller. In addition, using modal analysis, this paper shows that the proposed decentralized controller significantly affects only one pair of eigenvalues which have high participation with each generator, while slightly affects other eigenvalues. This result indicates that the application of the decentralized control scheme to enhance power system dynamic stability via excitation control have potential advantages because each low-damped mode occurs dominantly by each decentralized subsystem.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.8
• /
• pp.995-1001
• /
• 2012

This paper compares the performance of several tracking filters, namely, alpha-beta filter, Kalman filter and TBM tracking filter for ballistic target tracking problem using multi-function radar. Every of three tracking filters suggested was tested on simulator developed in accordance with TBM trajectory and MFR RSP measurement. The result shows the method using TBM tracking filter gives 75.3 % decreased velocity RMS error than alpha-beta filter. After initialization, the RMS error of range and velocity of the proposed filter is also smaller than the Kalman filter. Finally the proposed filter is suitable for high-speed TBM tracking due to the stable angle tracking accuracy.

• Preventive Nutrition and Food Science
• /
• v.15 no.4
• /
• pp.329-334
• /
• 2010

Buckwheat flour was incorporated into steamed breads by adding the flour in the range of 0~9% based on the Baker's percentages and the physicochemical properties and consumer acceptance were investigated. After mixing, kneading, proofing, and molding, bread dough was steamed for 15 min using a steam tray and boiling water. The samples were cooled to room temperature for 15 min and packed in airtight bags for further analyses. pH of the steamed bread decreased slightly while titratable acidity increased significantly from 1.02 to 1.37 mL with the incorporation of more buckwheat flour in the formulation (p<0.05). Water activity was not affected by the buckwheat flour level (p>0.05). Moisture content slightly decreased from 43.72 to 42.30% while soluble solids content increased from 0.63 to 0.85 as the buckwheat flour concentration increased. As a result of the addition of buckwheat flour, the specific volume decreased from 3.31 to 2.57 mL/g; on the other hand, the spread ratio ranged from 2.17 to 2.21 without significant differences among them (p>0.05). At the higher level of buckwheat content, lower scores of all color parameters ($L^*$, $a^*$, and $b^*$-values) were observed. Firmness increased significantly with an increase in buckwheat flour content (p<0.05). Consumer acceptance tests indicated that incorporation of up to 3% buckwheat flour in the formulation of steamed breads did not significantly influence the consumers' acceptability in all attributes tested, except for color and elasticity.

• Journal of the Korean Home Economics Association
• /
• v.40 no.10
• /
• pp.33-48
• /
• 2002

The purpose of this study guides them to the needs of leave preparation and material methods for self- examination and social adaptation so that they may live their remaining time in residental care better, and that execute preliminary training to improve their qualities for healthy family lives in the future. The program of this study was tested on 8 adolescents at their high school ages selected from an orphanage in Seoul. The effect of the program was determined by the quantity evaluation with a statistical analysis(ANCOVA) and also by the quality evaluation that requires interviews. Here is the summary of the result of leave preparation program; Firstly, the leave preparation program was effective on finding self-identity, psychological welfare and personal relationship. Secondly, The program helped them recognize that their own personalities, growing-up circumstances and family in root influenced on their self-understanding and growth. Most of the subjects said they accepted these factors in an affirmative way. Thirdly, the program gave a positive effect on their views of social adaptation and family formation after leave.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.7
• /
• pp.915-926
• /
• 1998

Velocity fields of near turbulent was behind a porous wind fence were measured using the 2-frame PTV method in a circulating water channel. The fences used in this study had different geometric porosity(.epsilon.) of 0, 20, 40 and 65%. The fence was embedded in a thin laminar boundary layer, i.e., .delta./H ~ = 0.1. Reynolds number based on the fence height H and free stream velocity(U$\_$o/) was about 8,400. As a result, a recirculating flow region was formed behind the fence for the .epsilon.=0% and 20% wind fence. For the wind fences having porosity larger than .epsilon.=40%, it was difficult to see separation bubbles behind the fence. The .epsilon.=20% porous fence reveals the maximum velocity reduction, however, the turbulent intensity and Reynolds shear stress are much greater than those of .epsilon.=40% fence. Among the wind fence tested in this study, the porous wind fence of .epsilon.=40% porosity is the most effective for abating wind erosion.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.4
• /
• pp.259-270
• /
• 2003

In order to properly design warning sounds that are affectively suitable to computer users, warning sounds used in Windows operating system were analyzed in terms of their sound properties; frequency band, spectral characteristics and physical intensity. A total of 36 warning sounds (3*4*3) were generated and tested with respect to three experimental variables. Among 178 collected affective adjectives that are related to hearing and sounds, seven representative affective adjectives were abstracted by statistical grouping techniques. In the experiment, subjective preference tests were performed for the 36 warning sounds according to the seven affective factors. From the result, the affective factors were again grouped into three major factors and the 60dB boost-type warning sounds at the low frequency band were, in general, the most preferred. followed by the 70dB cut-type sounds at the middle frequency band. These warning sounds have a characteristic of boost power spectrum below 1000Hz frequency band and received good scores on simplicity, clarity and accurateness.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1248-1257
• /
• 2014

Overhead transmission lines are crucial components in power transmission systems. Well-designed maintenance strategy for overhead lines is required for power utilities to minimize operating costs, while improving the reliability of the power system. This paper presents a maintenance priority index (MPI) of overhead lines for a reliability centered approach. Proposed maintenance strategy is composed of a state index and importance indices, taking into account a transmission condition and importance in system reliability, respectively. The state index is used to determine the condition of overhead lines. On the other hand, the proposed importance indices indicate their criticality analysis in transmission system, by using a load effect index (LEI) and failure effect index (FEI). The proposed maintenance method using the MPI has been tested on an IEEE 9-bus system, and a numerical result demonstrates that our strategy is more cost effective than traditional maintenance strategies.

• Journal of the Korean Society of Safety
• /
• v.27 no.6
• /
• pp.99-108
• /
• 2012

Ultra High Performance Concrete(UHPC) has compressive strength higher than 180 MPa. The use of steel fibers in the dense UHPC matrix increases tensile strength, ductility and bond strength between UHPC and rebars. However, to apply the advance material behavior of UHPC to the design of a structure, we need design formulas. The crack formula is one of them. This paper investigated experimentally the bond behavior of a rebar and K-UHPC, the UHPC developed by Korea Institute of Construction Technology, and, modified CEB-FIP crack formula based on the test. In addition, this paper tested the crack behavior of K-UHPC reinforced with rebars to verify the modified crack formula. The result showed that the modified formula is reasonable to predict the width of cracks in the reinforced K-UHPC structures.