• Journal of Korean Physical Therapy Science
• /
• v.27 no.1
• /
• pp.26-33
• /
• 2020

Purpose: The purpose of this study is to find the difference in lung function effects between a healthy adult male smoker, non-smoker after inspiratory muscle breathing training. Design: Quasi-experiment design. Method: In this study, we want to compare the effects of the inspiratory muscle breathing training smoker group (n=11) and non-smoker group (n=10) to target the healthy adult 21 people. All participated underwent 30 minutes of inspiratory muscle breathing training (5 times per week, for a total of 4 weeks). Using the spirometer in order to examine the ability to lung function EVC, ERV, FEV1/FVC was measured. Result: The results showed that the smoker group FVC and FEV1 increased statistically significantly (p<0.05). The results showed that the non-smoker group FVC and FEV1 increased statistically significantly (p<0.05). There was no statistical difference between them. Conclusion: This study tested the adult male smoker and the adult male non-smokers using inspiratory muscle breathing training the effect of smoking on lung function.

• Journal of Biomedical Engineering Research
• /
• v.18 no.2
• /
• pp.147-156
• /
• 1997

Various prosthetic heart valves have been developed and used clinically, but they have problems, such as thrombogenecity, hemoltsis, high cost and low durability. New types of trileaflet polymer heart valves have been developed in order to use them as inlet and outlet valves in a ventricular assist device. The aim of this study is to determine the hydrodynamic effectiveness of the newly designed trileaflet polymer valves and their feasibility for temporary use in the blood pumps. Trileaflet polymer valves are made of polyurethane, because of its good blood compatibility, high tonsil strength and good resistance to fatigue. An in vitro experimental investigation was perf'ormed in order to ev91ua1e hydrodynamic performance of the trileaflet polymer valves having different design and fabrication tech- niques. The St. Jude Medical valve (SJMV) and floating-type monoleaflet polymer valve (MLPV) were also tested The pressure drop across the valve, leakage volume, and the flow patterns mere investigated for valves. The result of comparative tests showed that the trileaflet polymer valves had a better hydrodynamic performance than the others. TPV which has two stable membrane shape showed the lowest back flow. The pressure hops of TPVs were lower than that of MLPV, but slightly higher than SJMV. The hydrodynamic performance of valves under the pulastile flow showed the similar results as steady flow. The velocity profiles and turbulent intensities were measured at the distal sites of valves using a hot-film anemometer. Central flow was maintained in trileaflet polymer valves, and the maximum turbulent intensities were lower in TPVs comparing to MLPV.

• The Journal of the Korea Contents Association
• /
• v.13 no.7
• /
• pp.369-378
• /
• 2013

The purpose of this study is to examine the effect of Employee Value Proposition (EVP) on job satisfaction and organizational loyalty. As a result, the study clarifies the hotel's EVP system in addition to examining the relationships among EVP, job satisfaction, and organizational loyalty by generating theocratical and practical application related to those behaviors. Using a sample drawn from full-time workers in hotel, total 379 participants were included in the analysis. The study tested the hypothesis by using a structural equation modeling approach. The analysis results show that EVP has significant influence on job satisfaction and organizational behavior. However, job satisfaction does not influence organizational loyalty.

• The Journal of the Korea Contents Association
• /
• v.5 no.6
• /
• pp.41-48
• /
• 2005

This paper presents a face recognition method based on the combination of well-known statistical representations of Principal Component Analysis(PCA), and Linear Discriminant Analysis(LDA) with Radial Basis Function Networks. The original face image is first processed by PCA to reduce the dimension, and thereby avoid the singularity of the within-class scatter matrix in LDA calculation. The result of PCA process is applied to LDA classifier. In the second approach, the LDA process Produce a discriminational features of the face image, which is taken as the input of the Radial Basis Function Network(RBFN). The proposed approaches has been tested on the ORL face database. The experimental results have been demonstrated, and the recognition rate of more than 93.5% has been achieved.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.4
• /
• pp.285-291
• /
• 2001

The liquid body foam which added the garlic extract, differs for clothes and kitchen detergent, industrial and domestic detergent, and it has various characteristics as a soft detergent for bath and hair product. The contents of various characteristics in this experiment have tested for the foam formation force, the moisture force and the antimicrobial force. In case of this product adding garlic extrat, we could know the three characteristics. In first case to increase the concentration of Sunfom-S, we could know that the foam formation force increases following to it. In second case to increase the concentration of propylene glycol, we could know that the moisture force increases following to moisturing agent. In third case to increase the concentration of garlic extract, we could know that the antibiosis and preservation efficacy appears between 3.0-4.0wt% and the sterilization efficacy appears more than 5.0wt%. According to the result of this experiment, we could recognize the characteristics concerning to quality of this product.

• Journal of the Korean Applied Science and Technology
• /
• v.10 no.2
• /
• pp.35-40
• /
• 1993

Alkaline cleaning agent(ACA) was prepared by blending of POE(4)octadecylmine(S-204), $Na_2CO_3$, sodium orthosilicate(Na-OSi). Tetronix T-701(T-701), and MJU-100A. The physical properties of ACA tested with steel specimen showed the following results. The cleaning powers of ACA-6(S-204 80g/$Na_2CO_3$, 160g/Na-OSi, 80g/T-701, 60g/MJU-100A, 20g mixture) for press-rust preventing oil was 98% and 99% degreasing at 2wt%, $70^{\circ}C$ and $90^{\circ}C$, respectively : for quenching oil, the cleaning power of ACA-6 was 95% degreasing at 2wt% and $70^{\circ}C$. From these results, it was ascertained that ACA-6 exhibited a good cleaning power. Foam heights measured immediately after foaming by Ross & Miles method and Ross & Clark method at 3wt%. $60^{\circ}C$ were 17mm and 40mm, respectively. As the result, ACA-6 was proved a good low foaming cleaning agent.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.4
• /
• pp.335-344
• /
• 2004

In this work, the properties as polishing wax for automobile of O/W type microemulsion containing wax, liquid paraffine and quaternaryammonium salt was investigated. The microemulsions were prepared at $96{\sim}97^{\circ}C$ by the phase inversion method, and polyoxyethylene(20) sorbitan monooleate (POE(20)SMO) and distearyl dimethyl ammonium chloride(D.D.A.C) as the emulsifiers were used. The mean particle size of the rnicroemulsions was about 7${\pm}$0.5nm and as the properties of polishing wax, gloss increased degree, water resistant gloss degree, initial and final contact angle after water resistance were tested. The result was that the value of water resistantance and contact angle were decreased with increasing amount of POE(20)SMO and D.D.A.C., while the gloss degree values did not affected. And the rnicroemulsion blended with mono ethylene glycol(MEG) of 5${\sim}$15wt% showed smaller particle size and more stable particle size distribution than without MEG. Finally, this microemulsion showed more excellent values of gloss degree, the water resistant gloss degree and contact angle, than two kinds of commercial polishing wax for automobile.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.2
• /
• pp.140-145
• /
• 2011

Cationic gemini-surfactant, namely 1,4-butane-bis(N-alkanoyloxyethyl-N,Ndimethyl)-diammonium bromide was synthesized and their inhibition effect on corrosion of mild steel in 1 M HCl solution was tested by weight loss method. The synthesized product was confirmed by FT-IR and $^1H-NMR$ spectroscopy. Surface tensions were measured by surface tensiometer Sigma 70. Their c.m.c. values evaluated by surface tension method was $4.1{\times}10^{-5}{\sim}5.4{\times}10^{-5}$ mol/L. The Krafft point of the these surfactants were <0~$10.7^{\circ}C$. The emulsifying properties of synthesized cationic gemini surfactants and sodium dodecyl sulfate (SDS), tetradecyl trimethyl ammonium bromide (TTAB) was investigated. Of these, 1,4-butane-bis(N-lauroyloxyethyl-N,N-dimethyl)- diammonium bromide, CGL 14-4-14 has been confirmed as a good emulsifier. The inhibition efficiency increases by increasing cationic gemini surfactant concentration. As a result, these surfactants are expected to be applied as corrosion inhibitors.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.1
• /
• pp.1-6
• /
• 2014

Gemini type of cationic surfactant, namely ${\alpha},{\omega}$-alkane-bis(N-lauroyloxyethyl-N,N-dimethyl)-diammonium bromide was synthesized and confirmed by FT-IR and $^1H$-NMR spectroscopy. Their inhibition effect on corrosion of mild steel in 1 M HCl solution was tested by weight loss method. Surface tensions were measured by surface tensiometer Sigma 70. Their c.m.c. values evaluated by surface tension method was $4.01{\times}10^{-5}{\sim}4.99{\times}10^{-5}mol/L$. The Krafft point of the these surfactants were < $0^{\circ}C$. The emulsifying properties of synthesized cationic gemini surfactants and sodium dodecyl sulfate (SDS), tetradecyl trimethyl ammonium bromide (TTAB) was investigated. Of these, ${\alpha},{\omega}$-alkane-bis(N-lauroyloxyethyl-N,N-dimethyl)-diammonium bromide has been confirmed as a good emulsifier. The inhibition efficiency increases by increasing cationic gemini surfactant concentration. As a result, these surfactants are expected to be applied as corrosion inhibitors.

• Journal of Distribution Science
• /
• v.18 no.8
• /
• pp.35-45
• /
• 2020

Purpose: Do close linkages among employees during service encounters always enhance customer satisfaction? Drawing on literature in social psychology, this research argues that under certain circumstances close linkages among employees undermine customer satisfaction. More specifically, this research explores a service failure context and shows that higher task interaction among employees during service encounters leads to higher perceived firm entitativity, resulting in an individual employee's service failure being detrimental to customer satisfaction with the firm. Data and research methodology: A series of experiments using scenarios across different service contexts was used in order to test hypotheses. Data was collected via Amazon Mechanical Turk and the models were tested using Hayes PROCESS. Results: The results show that interactions among employees during service result in 1) lower satisfaction with the firm and 2) lower revisit intentions in the future when there is a service failure by an individual employee. Following the main effects analysis, mediation analysis shows that the effect of employee interaction on customer satisfaction with the firm and revisit intention is mediated by perceived firm entitativity. Implications: By examining contexts where employee interaction may be detrimental to firms, this research provides novel insights on how to manage communications among service employees.