• 제목/요약/키워드: tested result

Search Result 4,507, Processing Time 0.034 seconds

Differential Responses of Soybean Cultivars to Cercospora sojina Isolates, the Causal Agent of Frogeye Leaf Spot in Korea

  • Kim, Ji-Seong;Lee, Young-Su;Kim, Sung-Kee;Kim, Ki-Deok;Kim, Jin-Won
    • The Plant Pathology Journal
    • /
    • v.27 no.2
    • /
    • pp.183-186
    • /
    • 2011
  • During the summer of 2005, specimens of soybean cultivars (Daepung, Daewon, Hwanggeum and Taegwang) showing frogeye leaf spot (FLS) were obtained from various areas in Korea. Eight isolates identified as Cercospora sojina were inoculated on the adaxial leaf surfaces of 63 Korean soybean cultivars; the disease responses to each isolate were evaluated 14 days and 21 days after inoculation. Based on the disease responses (resistant or susceptible) of the cultivars by the isolates, a set of cultivars (Anpeong, Bogwang, Cheongdu No. 1, Cheongja No. 3, Dachae, Daemang, Jangwon, Namhae, Sowon, Taegwang) were selected and inoculated with seven isolates for further testing pathogenic variance. Interestingly, 6 out of 7 tested C. sojina isolates revealed differential ability in infecting different soybean cultivars. This result may indicate the possibility of new race occurrence or pathogenic variation; this also presents evidence for prevalent FLS occurrence during humid and hot weather in Korea.

Development of Vehicle Integrated Dynamics Control System with Brake System Control (제동 장치를 이용한 차량통합운동제어시스템 개발)

  • Song, Jeonghoon
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.41 no.7
    • /
    • pp.591-597
    • /
    • 2017
  • This study is to develop a vehicle Integrated Dynamics Control System(IDCB) that can stabilize the lateral dynamics and maintain steerability. To accomplish this task, an eight degree of freedom vehicle model and a nonlinear observer are designed. The IDCB independently controls the brake systems of four wheels with a fuzzy logic control and a sliding model control. The result shows that the nonlinear observer produced satisfactory results. IDCB tracked the reference yaw rate and reduced the body slip angle under all tested conditions. It indicates that the IDCB enhanced lateral stability and preserved steerability.

Design Improvement via Structural Dynamics Modification - Application to Noise Reduction in Outdoor Unit of Air Conditioner (구조물 동특성 변경을 통한 설계 개선 -공조기 실외기 소음 저감 적용)

  • Choi, Sang-Hyeon;Park, Nam-Gyu;Park, Youn-Sik
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.12 no.5
    • /
    • pp.355-364
    • /
    • 2002
  • The goal of this research is to reduce noise level of an outdoor unit of air conditioner by changing its dynamic characteristics using SDM (structural dynamics modification) technique. At first, the emitting noise was measured and analyzed. The measurement records show the most critical frequency components which influences on the noise level. Then it was tried to move the natural frequencies outside the critical frequency region by SDM. Since it is very difficult to get a reliable FE model of air conditioner, experimentally measured frequency response functions were used to derive sensitivities that are very important to obtain design changes. The positions of modification and the thickness of modifying structures were determined to improve the dynamic characteristics of air conditioner. The recommended design guideline to move its natural frequencies outside the targeting frequency range was obtained. Then in order to prove its effectiveness, the changed design was experimentally tested and found that the SDM result is very effective to reduce not only its vibration but also its emitting noise.

Choice of Health Care and Traditional Medicine (양.한방의료 서비스 선택에 관한 연구)

  • 이원재
    • Health Policy and Management
    • /
    • v.8 no.1
    • /
    • pp.183-202
    • /
    • 1998
  • This study is to investigate patient's choice of health care and the demand for Korean traditional medicine care in rural areas in 1995. It tried to evaluate the effect of out-of-pocket expenditure, travel time, and waiting time on improving care-seeking and substituting clinical medicine for pharmacy care and Korean traditional medicine care in rural areas. The statistical model of this study is conditional logit to estimate effects of choice-specific and individual-specific characteristics on the choice of type of services. This study used, as explanatory variables, average out-of-pocket payment, travel time, and waiting time of services required to use the services. The model was empirically tested using data from 1995 Korean National Health Survery. The results showed that rural Koreans responded to out-of pocket payment and travel time. Increases of out-of-pocket payment and travel time decreased the probability to choose care in rural Korea. Rural Koreans were more likely to seek care than others with low out-of-pocket payment and travel time. The probability of choosing Korean traditional medicine were higher among the members of the households with higher education level and older persons, while they were lower in the households with large family than others compared with the probabilities of choosing public health facilities. The result of this study implies that policy on use of health care in rural Korea can be focused in managing travel time and out-of-pocket payment.

  • PDF

A Study on the Position Control of an Electro-Hydraulic Servomechanism Using Variable Structure System (가변구조를 이용한 전기-유압서보계의 위치제어에 관한 연구)

  • 허준영;권기수;하석홍;조겸래;이진걸
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.13 no.2
    • /
    • pp.213-220
    • /
    • 1989
  • This paper describes the application of the variable structure control(VSC) concept for the position control of an electro-hydraulic servomotor system. The basic philosopy of VSC is that the structure of the feedback control is altered as the state crosses discontinuity surfaces in the state space with the result that certain desirable properties are achieved. The switching of the control function yields total(or selective) invariance to system parameter variations and disturbances, and closed loop eigen value placement in time-varing and uncertain systems. The control scheme is derived, implemented and tested in the laboratory where analog controller have been used to control the representive servosystem. The control system schematics are given and simple results are shown for illustration. And the results of variable structure system for the electro-hydraulic servomotor were compared to that of the fixed structure system when load disturbance and system parameter variation exists.

An Experiment on Thermosyphon Boiling in Uniformly Heated Vertical Tube and Asymmetrically Heated Vertical Channel

  • Kwak, Ho-Young;Jeon, Jin-Seok;Na, Jung-Hee;Park, Hong-Chul
    • Journal of Mechanical Science and Technology
    • /
    • v.15 no.1
    • /
    • pp.98-107
    • /
    • 2001
  • Continuing efforts to achieve increased circuit performance in electronic package have resulted in higher power density at chip and module level. As a result, the thermal management of electronic package has been important in maintaining or improving the reliability of the component. An experimental investigation of thermosyphonic boiling in vertical tube and channel made by two parallel rectangular plates was carried out in this study for possible application of the direct immersion cooling. Fluorinert FC-72 as a working fluid was used in this experiment. Asymmetric heated channel of open periphery with gap size of 1, 2, 4 and 26mm and uniformly heated vertical tubes with diameter of 9, 15 and 20mm were boiled at saturated condition. The boiling curves from tested surfaces exhibited the boiling hysteresis. It was also found that the gap size is not a significant parameter for the thermosyphonic boiling heat transfer with this Fluorinert. Rather pool boiling characteristics appeared for larger gap size and tube diameter. The heat transfer coefficients measured were also compared with the calculation results by Chens correlation.

  • PDF

Effects of Rose Fruit Extract Drinks on Sociopsychological Stress (사회.심리적 스트레스에 미치는 장미 추출 음료의 영향)

  • 최진호;김대익;박수현;김동우;조원기;유병팔
    • Journal of Life Science
    • /
    • v.9 no.5
    • /
    • pp.612-619
    • /
    • 1999
  • The effects of anti-stress rose fruit (ASRF) extract drink (ASRF-0.1% and ASRF-0.5% concentrations) were tested for the anti-stress action. ICR male mice (20$\pm$2 g) were fed with basic experimental diets and given free access to water containing these ingredients for 18 days. Psychological stress/sociopsychological stress exposed by foot-shock for 1 hour for 3 days. Both ASRF-0.1 and ASRF-0.5 groups in the sociopsychological stress resulted in a significant decrease of 24.3% and 38.0% in plasma corticosterone (CS) secretion compared with psychological stress (control group). Noradrenaline (NA) secretion in the brain were significantly increased 35.9% in ASRF-0.5 group, but NA secretion in ASRF-0.1 group could not be obtained significant result compared with control group. MHPG-SO4 (3-Methoxy-4-hydroxy-phenylethy leneglycol sulfate) levels in the brain resulted in a marked decreases of 16.5% and 18.9% respectively in ASRF-0.1 and ASRF-0.5 groups. NA/MHPG-SO4 ratios in the brain of ASRF-0.1 and ASRF-0.5 groups resulted in a significantly increase of 16.5% and 67.0%, respectively, compared with control group. These results suggest that anti-stress rose fruit (ASRF) drink also can effectively ridded the sociopsychological stress.

  • PDF

Accurate Quantification of Saccharin Using Isotope Dilution Liquid Chromatography Mass Spectrometry (ID-LC/MS)

  • Lee, Yun-Jung;Kim, Byung-Joo;Kim, Jeong-Kwon;Ahn, Seong-Hee
    • Mass Spectrometry Letters
    • /
    • v.2 no.2
    • /
    • pp.37-40
    • /
    • 2011
  • Saccharin is a commonly used artificial sweetener in foodstuffs. However, for its carcinogenic dispute, it has been regulated by government bodies. In this study, isotope dilution mass spectrometry (ID-MS) was introduced for the accurate quantification of saccharin. To employ ID-LC/MS, we obtained its isotope analogue, $^{13}C_1$-sodium saccharin, by customized synthesis. Samples were spiked with $^{13}C_1$-sodium saccharin and analyzed with LC/MS in negative mode. Chromatographic conditions were optimized for the adequate chromatographic retention and separation of saccharin with a $C_{18}$ column. MS was operated with electrospray ionization by the selected ion monitoring (SIM) mode of $[M-H]^-$ for saccharin (m/z 182) and $[M-Na]^-$ for its isotope analogue (m/z 183). To validate the ID-LC/MS method for accurate measurement, we prepared a batch of a candidate material by sortifying quasi-tea-drinks with saccharin and analyzed samples gravimetrically fortified in various levels of concentration. The repeatability and reproducibility of this method was tested by analyzing the reference material. Result show that ID-LC/MS is a reliable method for the quantitative analysis of saccharin.

A Study on the Texture Characteristics of Ssooksulgis Affected by Mugworts (쑥 첨가량에 따른 쑥설기의 텍스쳐에 관한 연구)

  • 심영자;백재은;전희정
    • Korean journal of food and cookery science
    • /
    • v.7 no.1
    • /
    • pp.35-43
    • /
    • 1991
  • Ssooksulgis made with different levels of Mugworts were tested to investigate the texture characteristics by sensory evaluation and mechanical test in this study. As a result of the sensory evaluation for Ssooksulgis with the levels of 0%, 10%, 20%, 30% and 40% , the consistency, texture, moistness and flavor were increased according to the increase of the added Mugworts. In view of color and overall quality, 30% Ssooksulgis was preferable than those of other mixing levels. In the texturometer measurement for Ssooksulgis, hardness tend to decrease, while springiness and cohesiveness tend to increase according to the increase of the added Mugworts. As for Ssooksulgis, the consistency and moistness in sensory evaluation correlated significantly with the cohesiveness and correlated negatively with hardness, chewiness, gumminess in mechanical test (p<0.01).

  • PDF

A Study on the Impact to Safety Management by the Speedy Construction Work and the Prevention Measure (돌관공사가 안전관리에 미치는 영향 및 예방대책에 관한 연구)

  • Ha, Haeng-Bong;Bang, Myung-Seok
    • Journal of the Korea Safety Management & Science
    • /
    • v.15 no.2
    • /
    • pp.143-149
    • /
    • 2013
  • Recently in the construction business construction companies has been ordered to survive in the terriblly competitive environment. Aa a result, most of the project with low-priced contract needs a speedy progress during all construction period. For the last five years major incident frequently occurs and results in the death of 189 workers at major top 6 construction builders. In most recent 10 years, the cause of major incidents happened in construction company is the speedy construction work that is affecting on the safety management. To prevent these accidents in the speedy construction work, four factors were chosed and analysed such as the personnel/organization, the working budget, the subcontractor selection and the employee motivation. The head office taked the support plan and tested it at the pilot work site. It showed a reduced accident and the harmful factors can be eliminated. It should be able to apply to the field to secure safety and prevent accidents.