• Membrane Journal
• /
• v.23 no.1
• /
• pp.45-53
• /
• 2013

Membrane filtration processes are increasingly popular for drinking water treatment that requires high quality of water. But pre-treatment system (Coagulation/Flocculation/Sedimentation) requires increased footprint and installation cost. In addition, 5~10% of the concentrate are formed. In this study, the pressurized PVDF membrane (ECONITY Co., Ltd.) system was tested with surface water (Han River, South Korea) without pre-treatment. As a result, permeate flux was operated between 1 m/d and 2.4 m/d (at $25^{\circ}C$) without chemical cleaning for one year and membrane permeate turbidity was maintained stably under 0.05 NTU regardless of raw water turbidity. And we studied application of concetrate treatment of pressurized PVDF membrane by submerged PE membrane (ECONITY Co., Ltd.). As a result, we increased recovery of total treatment process to 99.5%.

• Korean Journal of Pharmacognosy
• /
• v.5 no.3
• /
• pp.147-154
• /
• 1974

Some crude drugs in ancient literatures have been used as traditional therapeutic agent of leucorrhea mainly caused by Trichomonas vaginalis and Candida albicans. Sixty six kinds of crude drugs in ancient literatures and ten constituents were selected as sample drugs. Trichomycin standard was tested to compare with the above drugs. To determine the anti-fungal effect of these drugs on Candida albicans Yu 1200, a test organism, screening test was conducted. Antifungal activities of crude drug water extracts were observed by means of two test methods : firstly through the agar slant method and secondly the counting chamber method which was used for acknowledged drug agents upon the result of the agar slant method. And in order to improve the fungicidal effect, the organisms were stained with 0.02% methylene blue solution. The results of the above test indicated that Fritillariae Rhizoma has antifungal action in the concentration of 310mcg/ml, Coptidis Rhizoma in 620mcg/ml, Meliae Cortex, Scutellariae Radix both in 5,000mcg/ml. Baicalin, catechol among the pure isolated constituents inhibited in the range of 50mcg/ml. This score was based on 50% inhibition in comparison with amounts of control organisms. Rhei Rhizoma, Mori Radicis Cortex, Linderae Radix, and Amomi globosi Fructus showed the antifungal effect moderately in 5,000mcg/ml, and baicalein and pectolinarin in 50mcg/ml in the limit of between 35% and 50% antifungal activity. Staining with 0.02% methylene blue showed that any of the crude drug extracts was unable to stain the cells, but trichomycin in 0.86unit/ml able to stain 12% of the cells. This result means that crude drugs probably do not have fungicidal but fungistatic action.

• The Mathematical Education
• /
• v.49 no.2
• /
• pp.175-198
• /
• 2010

To understand natural or social phenomena, we need various information, knowledge, and thought skills. In this context, mathematics and sciences provide us with excellent tools for that purpose. This explains the reasons why there is always significant emphasis on mathematics and sciences in school education; some of the general goals in school education today are to illustrate physical phenomena with mathematical tools based on scientific consideration, to encourage students understand the mathematical concepts implied in the phenomena, and provide them with ability to apply what they learned to the real world problems. For the mentioned goals, we extract six fundamental principles for the integrated mathematics and science education (IMSE) from literature review and suggest a instructional design model. This model forms a fundamental of a case study we performed to which the IMSE was applied and tested to collect insights for design and practice. The case study was done for 10 students (2 female students, 8 male ones) at a coeducational high school in Seoul, the first semester 2009. Educational tools including graphic calculator(Voyage200) and motion detector (CBR) were utilized in the class. The analysis result for the class show that the students have successfully developed various mathematical concepts including the rate of change, the instantaneous rate of change, and derivatives based on the physical concepts like velocity, accelerate, etc. In the class, they described the physical phenomena with mathematical expressions and understood the motion of objects based on the idea of derivatives. From this result, we conclude that the IMSE builds integrated knowledge for the students in a positive way.

• Korean Journal of Organic Agriculture
• /
• v.12 no.4
• /
• pp.451-461
• /
• 2004

In an animals, identification system has been widely used by ear tag with dummy code and blood typing for parernity. Also, genotyping methods were using for useful mean of individual identification for live animals. In the case of genotyping estimation of gene in population of korean native chicken. In this study, we tested for development of genetic markers used it possible to determination of individual identification system. The candidate genetic markers were used already bow 10 of microstalite DNA sequence information in chromosome No. 1 and 14. Result of analysis for genotyping, the number of alleles of those microstatelites DNA was shown minimal 3 to 12 and the heterozygote expression frequency range was shown from 0.617 to 0.862. In our result, effective number of allele for each microsatellites DNA was shown 3~7, and the accuracy of individual identification was shown nearly 100%, when used with 6 genetic marker. This study was about genotyping method for identification used specific genetic marker form microsatellite DNA in the brand marketing of korean native chicken. Our results suggest that genotyping method used specific genetic marker from microsatellite DNA might be very useful for determination of individual identification.

• Fire Science and Engineering
• /
• v.20 no.4 s.64
• /
• pp.26-32
• /
• 2006

Nowadays in Korea, KS F 2271 has been using for the test of fire safety performance of sandwich panels. Smoke toxicity test is the test for the toxicity evaluation of smoke and hazardous gas, caused by combustion of building materials and finishing materials. Smoke toxicity can be evaluated by the mean incapacitation time of mice; however this method is not a quantitative way. This test result can be influenced by the health status of mice and test condition. Specific optical density can be quantitatively measured by ISO 5659-2 single chamber method and toxic gases can be quantitatively measured by FTIR analysis. In this study, specific optical density of sandwich panel insulations, which are widely used in Korea, were tested using the ISO 5659-2 single chamber test method and compared with each test. Also, in the second test of three tests for each specimen, FTIR analysis was performed and quantitative test results(HCl, $NO_2$, etc) were compared with each test result.

• Korean Journal of Chemical Engineering
• /
• v.35 no.12
• /
• pp.2327-2335
• /
• 2018

Fluid catalytic cracking (FCC) is an important chemical process that is widely used to produce valuable petrochemical products by cracking heavier components. However, many difficulties exist in modeling the FCC process due to its complexity. In this study, a dynamic process model of a FCC process is suggested and its structural observability is analyzed. In the process modeling, yield function for the kinetic model of the riser reactor was applied to explain the product distribution. Hydrodynamics, mass balance and energy balance equations of the riser reactor and the regenerator were used to complete the modeling. The process model was tested in steady-state simulation and dynamic simulation, which gives dynamic responses to the change of process variables. The result was compared with the measured data from operating plaint. In the structural analysis, the system was analyzed using the process model and the process design to identify the structural observability of the system. The reactor and regenerator unit in the system were divided into six nodes based on their functions and modeling relationship equations were built based on nodes and edges of the directed graph of the system. Output-set assignment algorithm was demonstrated on the occurrence matrix to find observable nodes and variables. Optimal locations for minimal addition of measurements could be found by completing the whole output-set assignment algorithm of the system. The result of this study can help predict the state more accurately and improve observability of a complex chemical process with minimal cost.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.4
• /
• pp.13-25
• /
• 2012

This study aims to experimentally investigate the characteristics of secondary flows in a natural channel. For this objective, various conditions of water discharge and depth are tested in a real-scale experimental channel which has 1.2 of meandering. From results of experiments, it is observed that the maximum flow velocity exists in the outer zone of ben. This result is different from the previous studies conducted with laboratory experiments. The bank of 1:2 slope replicating the condition of natural channel is considered to cause this result. The location of the maximum flow velocity moves to the center of channel as the channel changes to be straight. It is also known from this study that two vorteces coexist on the left and right banks of bend.

• Journal of Korean Medicine for Obesity Research
• /
• v.12 no.2
• /
• pp.8-16
• /
• 2012

Objectives: This study is designed to report the correlation between Body Mass Index(BMI), Heart Rate Variability(HRV), stess, drinking alcohol, coffee and smoking. Methods: From 1st January 2010 to 31st December 2012, We tested on 458 patients who hospitalized in Cheong Yeon Korean Medicine Hospital for reducing their weights, then we collected the statistical analysis with the result of their HRV and the special survey. Results: This experiment was studied on total 458 patients, 27 were men and 431 were women. The average of the age of men was $28.23{\pm}4.22$ and $24.31{\pm}385$ was women. There were significant differences in BMI, Low frequency(LF), High frequency(HF), stress score, frequency of drinking alcohol, smoking and drinking coffee followed by their ages. When we looked at the correlation between obesity with smoking and drinking coffee, we can see that the BMI increased, the frequency of drinking alcohol was decreased, however there were no statistic correlation in smoking and drinking coffee with BMI. Conclusions: With the result of HRV, we can suggest the BMI and stress score are correlated each other but we need further studies about passive stress relief by taking favourite food such as drinking alcohol, smoking, drinking coffee, etc.

• The Korean Journal of Franchise Management
• /
• v.12 no.3
• /
• pp.21-34
• /
• 2021

Purpose: As the visual expression cue that can easily reveal and imprint the brand image to consumers becomes more important, franchise coffee shops are making various efforts to establish design elements and brand identity. Therefore, the purpose of this study is to examine the structural model between design elements, brand identity, brand association, brand personality, and brand image of franchise coffee shops from various angles, and to suggest a plan for using visual elements makes a brand image on the franchise in the future. Research design, data, and methodology: This study tests the structural relationship between design elements, brand identity, brand association, brand personality, and brand image of franchise coffee shops. design elements are divided into three attributes (interior design, product design). And brand identity is divided into two attributes (brand name, brand symbol/logo). In order to achieve the purposes of this research, research model and hypotheses were developed based on previous researches. All constructs were measured with multiple items developed and tested in the previous studies. The data were collected from 380 customers who visited franchise coffee shops and were analyzed through SPSS 26.0 and SmartPLS 3.0 statistical package program. Result: As a result of this study, first, it is confirmed that product design has a positive effect on brand association toward coffee shops. Second, interior design and product design have a positive effect on brand personality. Third, all brand identity have a significant positive impact on brand association and brand personality. Finally, brand association and brand personality of coffee specialty shops have a positive effect on brand image. Conclusions: The following implications of this study are as follows. This study is confirmed that there is an effect of design elements attributes and brand identity attributes on brand association and brand personality. And, the brand image was found to be influenced by brand association and brand personality. This suggests that it can be used to establish visible marketing strategies for franchise coffee shops. Therefore, it is necessary to further improve efforts to raise the level of the brand image through visual factors such as unusual interior design, product packages.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.4
• /
• pp.271-278
• /
• 2018

In this study, the conventional cylinder-shaped lower bar on the canvas was modified and its performance was tested to improve the opening force of the stow net on anchor. The improved new lower bar used in the test is consisted of 13 flat bars with a length of 1.8 m, a width of 0.075 m and a thickness of 4 mm, and a pipe with a length of 2.0 m and a diameter of 50 mm. A stow net with the improved lower bar and a stow net with an existing lower bar were installed underwater and their trajectories for 21 hours were examined. To confirm their trajectories, GPS loggers were attached to the buoys on the left and right canvases and the buoy of the hauling rope. As a result of the test, the rotation of the gear with the improved bar was smoother than that with the existing bar. As a result of comparing the changes in the interval of the buoys attached to the canvas after the low and high tide, the buoy spacing of the gear with the improved bar is wider than that of the conventional gear; moreover, the larger the interval, the smoother the rotation of the fishing gear was. Therefore, it is considered that using the improved lower bar can enhance the performance of the stow net.