• Nuclear Engineering and Technology
• /
• v.26 no.1
• /
• pp.9-18
• /
• 1994

The engineered safeguards of Wolsung nuclear power plant unit 1 contain redundant systems of 2-out-of-3 logic which are not operating under normal conditions but are called upon to act when emergency conditions develop. To ensure their operability, the systems are periodically tested. In this work, we develop the unavailability formulae for 2-out-of-3 logic configurations which take into account the failure probability of the channels tested due to human error in the simultaneous testing scheme. We also develop the model for the probability that the reactor is tripped during the surveillance test due to either system failure or human error. We determined the optimal inspection periods of safety systems, taking into account both the unavailability of the safety system and the probability that the reactor is tripped during the surveillance test. We compared the results with the inspection periods currently used at Wolsung NPP Unit 1. As a result, the inspection periods obtained using a minimum human error (8.24 $\times$ 1$^{-6}$ ) are shorter than those currently used in Wolsung NPP unit 1 whereas the inspection periods obtained using a maximum human error are (4.44 $\times$ 10$^{-4}$ ) longer than those used in Wolsung NPP unit 1.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1153-1160
• /
• 2019

In this paper, we experimented to find out how the number of convolution layers, the size, and the number of kernels affect the CNN. In addition, the general CNN was also tested for analysis and compared with the CNN used in the experiment. The neural networks used for the analysis are based on CNN, and each experimental model is experimented with the number of layers, the size, and the number of kernels at a constant value. All experiments were conducted using two layers of fully connected layers as a fixed. All other variables were tested with the same value. As the result of the analysis, when the number of layers is small, the data variance value is small regardless of the size and number of kernels, showing a solid accuracy. As the number of layers increases, the accuracy increases, but from above a certain number, the accuracy decreases, and the variance value also increases, resulting in a large accuracy deviation. The number of kernels had a greater effect on learning speed than other variables.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2113-2120
• /
• 2013

In this study, an efficient machine vision based inspection system is developed for the in-line measurement of phosphor resin dispensing shapes on LED chip package. Since the phosphor resin (target material) has semitransparent characteristics, illuminated light beam is reflected from the bottom of the chip as well as from the surface. Since such phenomenon can deteriorate inspection reliability, a white LED and a 635nm laser slit beams are experimentally tested to decide suitable illumination optics. Also, specular and diffuse reflection methods are tested to decide suitable optical triangulation. As a result, it can be known that the combination of a white slit beam source and specular reflection method show the best inspection results. The Catmull-Rom spline interpolation is applied to the obtained data to form smoother surface. From the results, it can be conclude that the developed system can be sucessfully applied to the in-line inspection of LED chip packaging process.

• Journal of Preventive Medicine and Public Health
• /
• v.5 no.1
• /
• pp.43-48
• /
• 1972

5 bed sand filter, applying biological oxidation, was designed and studied on the treatment of water works. Never using any coagulant agent (drugs), which may cause water pollution in pre-treatment of head water, the auther attempt a high rate filtration by the microorganism (nitrofication bacteria) end plant which populate in multi layer sand beds. The result are as follows : In order to evaluate the oxygen effect on filtration, oxygen was injected in aeration tank attached to each filter tank while filtration, and $NH_3$ was tested as a representaiive ingredient. It was found out that the aeration method was more effective, with over 33% of $NH_3$ removal capacity, than the anerobic and this 5 bed filter showed double removal capacity of $NH_3$ by comparing with conventional sand bed (2 stage bed). According to the examination of two kind of head water, pre-treated with coagulant agent and activated carton, the filtration capacity was affected by the polluted condition of head water, resulting that lower value of pollution and slower velocity of filtration showed more efficiency of $NH_3$ removal. In this experiment $NH_3$ content tested in treated water had a fairly good correlation with others.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.352-355
• /
• 2006

As the stainless steel has good corrosion resistance, mechanical property and ease of manufacture, it has been studied as the candidate material of metallic bipolar plate for automotive PIMFC. But, metal is dissolved under fuel cell operating conditions Dissolved ions contaminate a membrane electrode assembly (MEA) and, decrease the fuel cell performance. In addition, metal oxide formation on the surface of stainless steel increases the contact resistance in the fuel cell. These problems have been acted as an obstacle in the application of stainless steel to bipolar plate. Therefore, many kinds of coating technologies have been examined in order to solve these problems. In this study, stainless steel was coated in order to achieve high conductivity and corrosion resistance by several methods. Contact resistance was measured by using a tensile tester and impedance analyzer Corrosion characteristics of coated stainless steel were examined by Tafel-extrapolation method from the polarization curves in a solution simulating the anodic and cathodic environment of PEMFC. Fuel cell performance was also evaluated by single cell test. We tested various coated metal bipolar plate and conventional and graphite were also tested as comparative samples. In the result, coated stainless steel bipolar plate exhibited better cell performance than graphite to bipolar plate.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.6
• /
• pp.645-655
• /
• 2018

The use of wood waste as substrate for plant growth exemplifies a strategy for turning waste into resources. The overall objective of this research was to evaluate the effects of wood-based growing media on plant cover in a slope area. Moreover, we tried to find out what physicochemical properties affect plant cover on a slope. For treatments, we tested natural soil, soil mixed with wood-based growing medium (1:1, w/w), and wood-based growing medium by itself. Physical and chemical characteristics were evaluated after four months from the date of treatment application to the experimental slope site. Soil coverage with seedlings of Lespedeza cyrtobotrya was measured for plant growth evaluation. Physicochemical properties were altered by mixing the natural soil with wood-based growing medium. Particularly, soil moisture and organic matter contents were significantly changed in soils treated with wood-based growing medium compared to soil alone. We confirmed that plant coverage rate was high when wood-based growing medium was mixed with the natural soil. There was a significant linear relationship between moisture content and CEC (Cation Exchange Capacity) of all growth media tested and plant coverage. This result was expected, as moisture content tends to increase with organic matter content, such as in wood-based growing medium. In conclusion, the high moisture content of the wood-based growing medium was considered effective for plant growth in the experimental slope site, and this wood-based growing medium provides a means to improve the harmony between the slope and the surrounding environment.

• Journal of Applied Biological Chemistry
• /
• v.56 no.4
• /
• pp.191-197
• /
• 2013

To classify the chemical hazard according to globally harmonized system of classification and labeling of chemicals (GHS), we investigated the genotoxicity of three chemicals, methyl myristate, 2-ethylhexanoic acid zinc salt, N,N,N',N'-tetrakis(2-hydroxyethyl) ethylenediamine, using male ICR mice bone marrow cells for the screening of micronucleus induction. Although these three chemicals have already been tested numerous times, a micronucleus test has not been conducted. The seven week-old male ICR mice were tested at three dosages for the three chemicals, respectively. After 24 h of oral administration with the three chemicals, the mice were sacrificed and their bone marrow cells were prepared for smearing slides. As a result of counting the micronucleated polychromatic erythrocyte (MNPCE) of 2,000 polychromatic erythrocytes, all treated groups expressed no statistically significant increase of MNPCE compared to the negative control group. There were no clinical signs related with the oral exposure of these three chemicals. It was concluded that these three chemicals did not induce micronucleus in the bone marrow cells of ICR mice, and there was no direct proportion with dosage. These results indicate that the three chemicals have no mutagenic potential under each test condition, and it is not classified these chemicals as mutagens by GHS.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.2
• /
• pp.97-102
• /
• 2006

The aim of this study was to investigate the feasibility and optimize permeability of slim patch type as a transdermal delivery system of caffein. Slim patch type was formulated and tested in modified Franz diffusion cell across cellulose membrane and hairless mouse skin in pH 5.8 phosphate buffer solution (PBS). The effect of $Pharmsolv^{\circledR}$ and drug concentration on permeation at four model, 1,2% $Pharmsolv^{\circledR}$ with $0.12\;mg/cm^2$ caffein and 0.12, $1.2\;mg/cm^2$ caffein with 2% $Pharmsolv^{\circledR}$ through hairless mouse skin was studied in vitro. The release of caffein from slim patch with various loading was fitted by the Higuchi's diffusion equation. The result showed that chemical $Pharmsolv^{\circledR}$ produced a large and significant increase of permeation. The effect of 2% $Pharmsolv^{\circledR}$ on permeation of caffein was greater about 10-fold greater than 1% $Pharmsolv^{\circledR}$ in first 60 minutes. The effect of drug concentration, however, was lower than that produced by chemical $Pharmsolv^{\circledR}$. Within the tested system, the most efficient combination for caffein slim patch type was $0.12\;mg/cm^2$ caffein with 2% $Pharmsolv^{\circledR},$ although $1.2\;mg/cm^2$ caffein with 2% $Pharmsolv^{\circledR}$ showed highest amounts permeation, because permeated percentages were significantly lower about $1/4{\sim}1/5$ times.

• Environmental Engineering Research
• /
• v.19 no.1
• /
• pp.15-22
• /
• 2014

In this study, the performances of various adsorbents-red mud, zeolite, limestone, and oyster shell-were investigated for the adsorption of multi-metal ions ($Cr^{3+}$, $Ni^{2+}$, $Cu^{2+}$, $Zn^{2+}$, $As^{3+}$, $Cd^{2+}$, and $Pb^{2+}$) from aqueous solutions. The result of scanning electron microscopy analyses indicated that the some metal ions were adsorbed onto the surface of the media. Moreover, Fourier transform infrared spectroscopy analysis showed that the Si(Al)-O bond (red mud and zeolite) and C-O bond (limestone and oyster shell) might be involved in heavy metal adsorption. The changes in the pH of the aqueous solutions upon applying adsorbents were investigated and the adsorption kinetics of the metal ions on different adsorbents were simulated by pseudo-first-order and pseudo-second-order models. The sorption process was relatively fast and equilibrium was reached after about 60 min of contact (except for $As^{3+}$). From the maximum capacity of the adsorption kinetic model, the removal of $Pb^{2+}$ and $Cu^{2+}$ were higher than for the other metal ions. Meanwhile, the reaction rate constants ($k_{1,2}$) indicated the slowest sorption in $As^{3+}$. The adsorption mechanisms of heavy metal ions were not only surface adsorption and ion exchange, but also surface precipitation. Based on the metal ions' adsorption efficiencies, red mud was found to be the most efficient of all the tested adsorbents. In addition, impurities in seawater did not lead to a significant decrease in the adsorption performance. It is concluded that red mud is a more economic high-performance alternative than the other tested adsorption materials for applying a removal of multi-metal in seawater.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.2
• /
• pp.224-230
• /
• 2012

In this paper, flame-resisting PMMA(polymethyl methacrylate) sheet was manufactured and its characteristics were tested. PMMA was synthesized by bulk polymerization of a monomer methyl methacrylate with addition of phosphorous flame retardant, triethyl phosphate and ethylene glycol dimethacrylate as a cross linking agent. PMMA sheet was manufactured by using the cell molding method, which does not alter or affect the existing property of PMMA. Then the characteristics of PMMA sheet were tested for the TEP content, the content and curing time of EGDMA. As TEP content increases, the length of carbonization lessens and the amount of char production increases. As a result, it strengthened the effect of flame retardants. But the hardness of the sheet decreased as TEP content increased. However, hardness increased when EGDMA was added up to 3 wt% while curing time was decreased from 3 hours to 2 hours. There was no change of hardness when more than 3 wt% of EGDMA was used.