• 한국응용과학기술학회지
• /
• 제26권1호
• /
• pp.51-59
• /
• 2009

Natural Artemisia extraction was extracted from Artemisia component using diethyl ether as a solvent, and we tested various pharmacetical and chemical characteristics of this extract. Characteristic experiments to use natural Artemisia extract tested antimicrobial experiment using microbe in pharmacetical material, and tested dye experiment using fiber in chemical material. From the result of characteristics experiment, some conclusions are obtained as follow. From the result of extraction experiment, it obtained about 10.4%-Artemisia extraction ratio as semi-solid state, and after dried in freezing from Artemisia extract of semi-solid state, it obtained about 10%-Artemisia extraction ratio as solid state of dark blue-green color. From result of antimicrobial experiment of Artemisia extract, number of staphylococcus aureus (ATCC-01) and aspergillus niger (ATCC-02) in microbe decreased more and more according to time passage. This phenomenon showed that Artemisia extract influences to antimicrobial effect. From the result of dye experiment of Artemisia extract, it appeared in direction of dark blue-green color after dyed to use cotton and silk with fiber to control in pH 7.5. Specially the result which confirmed dye of fiber with optical electron microscope (OEM), we could know that it appears darker silk than cotton.

• 한국응용과학기술학회지
• /
• 제26권3호
• /
• pp.341-349
• /
• 2009

Natural grape extraction was extracted from grape component using diethyl ether as a solvent, and we tested various pharmaceutical and chemical characteristics of this extract. Characteristic experiments to use natural grape extract tested antimicrobial experiment using microbe in pharmaceutical material, and tested dye experiment using fiber in chemical material. From the result of characteristics experiment, some conclusions are obtained as follow. From the result of characteristics experiment, it obtained about 7.5%-grape extraction ratio as semi-solid state, and after dried in freezing from grape extract of semi-solid state, it obtained about 10%-grape extraction ratio as solid state of dark purple color. From result of antimicrobial experiment of grape extract, number of staphylococcus aureus (KCMC-01) and aspergillus niger (KCMC-02) in microbe decreased more and more according to time passage. This phenomenon showed that grape extract influences to antimicrobial effect. From the result of dye experiment of grape extract, it appeared in direction of dark purple color after dyed to use cotton and silk with fiber to control in pH 7.5. Specially the result which confirmed dye of fiber with optical electron microscope(OEM), we could know that it appears darker silk than cotton.

• 한국응용과학기술학회지
• /
• 제28권4호
• /
• pp.393-401
• /
• 2011

Natural Curcumin belongs to Zingiber Officinale Roscoe was known to possess natural odor, natural taste, natural color, and other pharmaceutical & chemical characteristics. Natural Curcumin extract was made to use ethanol as a solvent was to show a yellow color having state of solid powder and an active component. Natural Curcumin extract tested pharmaceutical & chemical experiment to dilute in curcumin 1%-water solution. Curcumin extract tested antimicrobial experiment using microbe, and tested dye experiment using fiber. Some conclusions in the result of characteristics experiment was obtained as follow. The result of antimicrobial experiment showed that the growth of staphylococcus aureus (ATCC-001) and aspergillus niger (ATCC-002) as microbes decreased according to passage of time. This phenomenon could know that Curcumin compoment showed influence to antimicrobial effect. Also, the result of dye experiment showed that cotton and sick with fiber dyeing dyed in direction of dark yellow color. This phenomenon could know that Curcumin extract showed influence to dyeing effect in observation of optical electron microscope(OEM.) The result of instrument analysis ascertained inorganic components of K(53.300ppm), Na(1.150ppm), Ca(0.711ppm), Ti(0.351ppm), Li(0.256ppm), Cu(0.233ppm) etcs from Curcumin component with ICP/OES, and ascertained organic components of propanoic acid(1.859), benzene(10.814), phenol(14.194) etcs from Curcumin component with GC/MSD.

• 경영과정보연구
• /
• 제3권
• /
• pp.179-199
• /
• 1999

Case-Based Reasoning(CBR) offers a new approach for developing knowledge based systems. In case-based approach the problem solving experience of the domain expert is encoded in the form of cases. CBR has successfully been applied to many kinds of problems such as design, planning, diagnosis and forecasting. In this paper, CBR was applied for forecasting default risk. The applied result was successful in spite of the small casebase. Generally, CBR requires large casebase. So, if the number of data was large, the result was better. But in this paper, what financial variable was more forecastable was not tested. Next, this should be tested.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.396-401
• /
• 2000

There are three examples of noise reduction test by rail welding. One of them is tested at electric car running area and another is tested at expansion joint and long welded rail and the third is tested at open deck bridge. We can know from the result that the noise reduction effect of rail welding is very different to the type of track and the car. The condition of the test has some differences, but it may be useful reference of noise reduction.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.271-276
• /
• 1998

To apply the wear resistant steel plate for heavy duty vehicle, the wear characterisms of various kinds of commercial steel plates were invesigated by dry sand/rubber wheel tester which was tested under scratch abrasion mode. The wear tested pnaterials were boron steels which were manufactured by thereto machanical control process (TMCP) in order to achieve higher hardness. As the result of the test, wear resistance of steel plate increases with the hardness and carbon content. The wear loss of wear resistance steel plate (Hv440) is a half times than tinat of SWS490A (Hv160) steel plate in dry sand-rubber wheel test and the result in field test is similar to this dry sand/rubber wheel test result. Therefore, dry sand/rubber wheel tester can be used to predict the scratch abrasion life of the parts for heavy duty vehicle.

• 한국농공학회지
• /
• 제34권1호
• /
• pp.41-48
• /
• 1992

Various soil behaviors usually occurring in the geotechnical problems, such as, cutting and embankments, stability of slope, seepage, consolidations, shearing failures and liquefaction, should be predicted and analyzed in any way. An approach of these predictions may be followed by the development of the constitutive equations as first and subsequently solved by numerical methods. The purpose of this paper is develop the constitutive equation of sands uder monotonic or cyclic loadings. The constitutive equation which is based on elasto-plastic theory, modified anisotropic consolidated stress parameter by Sekiguchi et al and Pender's theory is derived. And the equation is included a new stress parameter, hardening function, Bauschinger's effects and Pender's theory. The model is later evaluated and confirmed the validity by the test data of Ottawa sand, Banwol sand Hongseong sand. The following conclustions may be drawn: 1. The consititutive equation which is based on elasto-plastic theory, modified anisotropic consolidated stress parpameter by Sekiguchi et al and Pender's theory is derived. The equation in included a new stress parameter, hardening function, Bauschinger's effect and Pender's theory. 2. For Ottawa sand, the result of the constitutive equation shows a better agreement than that of Oka et al. The result of axial strain agrees well with the tested data. However, the result of horizontal strain is little bit off for the cyclic loadings or large stress. It is thought that the deviation may be improved by considering Poisson's ratio and precise measurement of shear modulus. 3. Banwol sand is used for the strain and stress tests with different relative densitites and confining pressures. The predeicted result shows a good agreement with the tested data because the required material parameters were directly measurd and determined form this laboratory. 4. For Hongseong sand, the tests under same amplitude of cyclic deviatoric stress shows a similar result with the tested data in absolute strain. It shows the acute shape of turning point because the sine wave of input is used in the test but the serrated wave in prediction.

• 동의생리병리학회지
• /
• 제21권3호
• /
• pp.789-793
• /
• 2007

To evaluate the effectiveness of cupping and bloodletting therapy in the treatment of musculoskeletal diseases. Systematic searches were conducted on KSI, KISTI, DB Pia, KIOM Database, and Koreamed until January 2007 Hand-searches included conference proceedings and our own files. There were no restrictions regarding the language of journals published in Korea. Controlled trials of dry cupping, wet cupping, or blood letting for patients with musculoskeletal disease were considered for inclusion. Trials testing other forms of dry cupping therapy were included. Methodological quality was assessed by two doctors. 20 possibly relevant studies were identified and 5 studies were included. One trial tested wet cupping for ankle sprain and reported positive result. Two trials tested blood letting for low back pain, one was positive and the other one was neutral. One trial tested the types of dry cupping for low back pain, and Ki-gong cupping therapy was superior to other two types of cupping. One trial compared wet cupping with dry cupping for low back pain and the result was negative. The effectiveness of bloodletting plus acupuncture for treating patients with low back pain is superior to acupuncture in spite of low quality. One trial of wet cupping for ankle sprain had effects in reducing pain. However, I suggest that the rigorous RCTs of cupping and blood letting therapy will be conducted in well designed features.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 봄 학술발표회 논문집
• /
• pp.1-5
• /
• 1993

In the country, due to short comings of natural aggregates of good quality, it is common to use crushed stones. However, the investigation has not been done on the chemical reaction of crushed stones. This study tested and analyzed the aggregate chemical reaction by petrographic examination(ASTM C 295) for the test aggregates which had been tested by chemical method(ASTM C 289) in the first year. As a result, most of test aggregates didn't show any reaction but many have common deleterious mineral. Therefore, there exists the possibility of chemical reaction in petrogrphic point of view

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.74-78
• /
• 2002

Ultra-Precision CNC polishing system including on-machine measurement system, a corrective polishing algorithm is developed. The unit removal profiles for various polishing tools and analyzed and tested and dwell time distributions and residual errors for a target removal shape are calculated. The corrective polishing algorithm is tested with various workpieces. This result will be used for the software development of the CNC polishing system.