• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.439-440
• /
• 2008

Five floor coverings were tested with three different types of floor structures in the standard test building in order to evaluate the effectiveness of the floor impact sound reduction. The level of floor impact sound reduction is influenced by not only the types of floor coverings but interrelationship between the floor coverings and floor structures. From the tests, it was found that floor coverings were effective in reducing the floor impact sound using the light impact source. In addition, proper mixtures of the floor structure and the floor covering have shown effectiveness to a certain extent in reducing the floor impact sound using the heavy impact source.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.656-665
• /
• 2010

Shear modulus has been recognized as one of the important soil properties in dynamic analysis of ground and can be calculated from in situ measurement of shear wave velocity. Field seismic tests are the most accurate but expensive methods to investigate dynamic ground characteristics. Due to that reason, empirical equations for estimating the shear wave velocity are widely used rather than conducting in-situ tests. The most common equations are based on the N value obtained in conjuctions with a standard penetration test. In this paper, the field datas of standard penetration test and suspension PS logging measured in 126 sites of Korea were summarized and the correlation equations between N value and shear wave velocity are suggested.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1512-1519
• /
• 2005

In this study, the potential for liquefaction in the Incheon international airport was calculated by appling the standard penetration test data and laboratory test data to the modified Seed & Idriss(2001) method. The analysis was performed on the non-plastic silty layer and silty sand layer which within the depth of 20m, below 20 of the standard penetration value(N), and the ground water level. Also, each set of data was mapped by using GIS(geographic information systems) and the factor of safety for the potential for liquefaction was obtained by overlapping those layers. As a result, it was found that there exist potential hazard zone for the liquefaction partially. So, the additional detailed assessments for those are thought to be necessary.

• 한국화재소방학회논문지
• /
• 제15권1호
• /
• pp.66-74
• /
• 2001

소방호스의 밀착강도 시험방법을 개선하기 위하여 5개국(한국, 미국, 영국, 중국, 일본), 7개의 기술기준(KOFEIS, UL, FM, NFPA, BS, 중국기술기준, JIS, 일본검정기술기준)을 비교 고찰하고, 국내에서 생산되는 소방호스를 무작위로 발췌하여 밀착강도시험을 실시하였다. 밀착강도시험 및 기술기준 비교 고찰을 통하여 밀착강도시험은 소방호스의 호칭별로 시험시료의 크기와 박리시험속도 및 판정기준을 세분화함으로서 소방호스의 밀착강도를 개선시킬 수 있다는 결론을 얻었다.

• Computers and Concrete
• /
• 제4권2호
• /
• pp.83-100
• /
• 2007

Applying a direct formulation for the enrichment of the displacement field an extended finite element (XFEM) scheme for modeling of cohesive crack growth is developed. Only elements cut by the crack is enriched and the scheme fits within the framework of standard FEM code. The scheme is implemented for the 3-node constant strain triangle (CST) and the 6-node linear strain triangle (LST). Modeling of standard concrete test cases such as fracture in the notched three point beam bending test (TPBT) and in the four point shear beam test (FPSB) illustrates the performance. The XFEM results show good agreement with results obtained by applying standard interface elements in FEM and with experimental results. In conjunction with criteria for crack growth local versus nonlocal computation of the crack growth direction is discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.253-256
• /
• 2002

Generally, the owners of the facilities adopt CP(Cathodic Protection) Systems to protect the corrosion accidents previously. The developed countries have secured the standard of CP systems through the various researches and consolidation of the rules. So in the first stage. I had been studied the international standards; JSCE, NACE Standard, ASTM, DNV, Australian Standard etc. and standardized the CP systems about items performance. specifications and so on. In this thesis, I have been studying the results of standardization of performance test methods of CP rectifier to apply in Korea.

• 전기학회논문지
• /
• 제61권12호
• /
• pp.1774-1781
• /
• 2012

There are some efforts to improve the performance of electrical heat pump(EHP) and replace it with an alternative cooling equipment such as gas engine-driven heat pump(GHP), a gas cooling equipment, in order to solve the problem of summer electricity supply through reducing the summer electricity peak. This paper analyzes cost-benefit in accordance with replacement of electrical cooling system by gas cooling system using california standard test and sensitivity analysis of some scenarios.

• 조명전기설비학회논문지
• /
• 제25권8호
• /
• pp.1-7
• /
• 2011

Recently, all-electric house technology became one of the green growth technologies and is integrated with various areas such as electricity, machinery, architecture, material, and etc. Fossil fuel energy is used for heating and hot water supply in the conventional houses but electricity is adopted in the new conceptual houses to maximize advantages of electricity such as amenity, safety, cleanness, and so on. In this paper, an economic analysis is carried out when LED lightings are adopted using the California Standard Practice Test which has been used to estimate the effects of existing DSM (Demand Side Management) programs. The results are able to contribute to the diffusion of all-electric houses and the establishment of basic data and planning for DSM policies.

• 복식문화연구
• /
• 제15권5호
• /
• pp.737-748
• /
• 2007

Korea is now entering into aging society next to Japan in Asia, which is considered as unusual in the semi-developed countries. More than 50 year-old consumer market is anticipated to grow to 28.7% of the total in 2010 from 20.4% in 2000. In particular, the silver market is estimated to be formed in full range in 2010 when the generation born in 50s and 60s after the Korean War start to retire. In this study, body shapes are classified as standard, obese, and tiny according to the previous studies based on the body shape characteristics and the body measurement of the Elderly Women. Based on the classification, we developed pattern of the panty for the obese Elderly Women to provide basic materials for the quality enhancement of the clothing of the increasing Elderly Women. The followings are the result of the study 1. To categorize the body shapes of the Elderly Women focusing on the lower half, we grouped the target subjects using the nested approach by the average standard deviation and the factor analysis minimal diffusion method. Accordingly, type 1 and 2 had 36 members respectively and type 3 had 43 members. In this study, two Elderly Women subjects with standard body shape falling under the type 1 were selected as the subjects. 2. In the second trial evaluation for the panty pattern for the Elderly Women 32 items for appearance test and 3 items for functional test were evaluated. The scores in leg, sideline and hip were shown high and the balance between the parts was maintained very well. In the functional test, the panty used to be too tight for the leg curve but in the second trial it was improved, too. In each item, the second trial test showed better score than the first trial test. Conclusively, the most optimal panty prototype for the Elderly Women was proposed according to the trial test result.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.269-274
• /
• 2004

선박의 안전운항을 위한 각종 전자시스템의 개발과 도입은 항해사에게 필요한 각종 운항정보를 보다 신속하고 정확하게 파악하여 항해사의 운항 업무 부담을 경감할 뿐만 아니라 안전 운항에 보다 집중하게 한다. ECDIS는 전자해도를 이용한 선박항해용 시스템으로 성능과 시험에 대하여 각각 IMO와 IEC의 국제기준을 준수해야 한다. 그러나 국제기준의 내용이 명확하지 않고 추상적인 부분이 많이 실제 시험인증에의 적용에 어려움이 있다. 그러므로 명확한 세부기준을 각 시험항목별로 수립하였고 필요 항목에 대한 시험방법과 판정기준을 제시하였다. 특히 ECDIS가 표현하는 색에 대한 색차 시험을 위하여 측정 장비를 통해 측정된 값을 이용한 색차판정절차 및 관련 식을 구축하였고 실제 선박에서 겼을 수 있는 것과 동일한 센서 정보 입력이 가능하도록 모의신호생성기를 개발하여 인증시험에 활용할 수 있게 하였다. 최초의 성능표준에 추가된 백업장치 및 레스터 모드에 대한 시험기준도 함께 수립하여 선박항해용전자해도시스템 전체에 대한 성능 시험인증 기술을 개발하였다.