• 방사성폐기물학회지
• /
• 제13권2호
• /
• pp.99-112
• /
• 2015

본 연구에서는 고준위폐기물 처분시 완충재로 사용되는 벤토나이트의 열적 거동을 평가하기 위해 실내실험장치를 제작하였다. 그리고 실험 결과를 검증하기 위해 유한요소해석 프로그램인 ABAQUS를 이용한 열해석을 실시하였다. 그리고 실험기간 동안의 계절변화를 감안하여 외부대기 온도에 따른 벤토나이트의 열적거동을 평가하였다. 해석결과, 스테인리스스틸이 포함된 case3 해석모델의 결과가 실험결과와 1℃ 내외의 오차를 보이며 거의 일치함을 볼 수 있었다. 그리고 계절에 따른 벤토나이트 온도 해석을 수행한 결과, 시간에 따른 온도분포 경향이 일치함을 확인하였다. 이러한 열해석을 통해 완충재를 둘러싸고 있는 물질의 열전도도와 외부대기의 온도가 벤토나이트 완충재의 열적 거동에 큰 영향을 주는 요소임을 확인할 수 있었다. 향후 열원을 포함한 벤토나이트 완충재의 수분 포화 특성 실험이 실시 될 예정이므로, 실험에 대한 검증과 예측을 위해 보다 적합한 수치해석모델 개발에 대한 연구가 필요할 것이다.

• 한국콘텐츠학회논문지
• /
• 제14권3호
• /
• pp.52-58
• /
• 2014

현장검사는 환자가 있는 즉석에서 검사하여 결과를 알 수 있으며 신속하고 경제적으로 시행할 수 있는 장점이 있어 널리 이용되고 있다. 특히 면역크로마토그래피법을 이용한 검사 항목은 편리하게 쓰이고 있으나 오류가 발생하여 재확인 할 경우, 판독선이 시간이 경과됨에 따라 재확인이 불가능한 단점이 있고 반응이 약한 경우 판독자에 따라 오류가 생길 수 있다. 이에 검사에 쓰이는 다양한 현장검사용 스트립의 판독이 가능하고 화상을 저장할 수 있는 기능을 가진 멀티 스트립 리더기를 개발하였고, 요 임신검사가 의뢰된 검체를 대상으로 개발된 멀티 스트립 리더기를 평가한 결과 100% 일치된 결과를 보였다. 본 연구에서 개발된 멀티 스트립 리더기는 실제 임상에서 편리하고 경제적으로 사용될 수 있을 것으로 생각된다.

• 패션비즈니스
• /
• 제16권1호
• /
• pp.16-25
• /
• 2012

As the test results for surface color, dyeing durability, antibiosis of cotton fabrics and silk fabrics dyed with Agastache rugosa extract, the following conclusions were obtained. The surface color of all the dyed fabrics was confirmed mostly as a GY system. As the result of chrominance(${\Delta}E_{ab}$) measurement, in the case of cotton fabrics the dyed fabrics treated with $Al_2(SO_4)_3$ mordant showed the highest value and in the case of silk fabrics the non-mordant dyed fabrics showed the highest value. The dyeing durability of test fabrics dyed with Agastache rugosa extract are as follows. As the test results of colorfastness to laundry for cotton dyed fabrics, the discoloration degree showed 1st-2nd grade and the contamination degree showed 4th-5th grade. As the test result of colorfastness to dry cleaning for silk dyed fabrics, the contamination degree showed from 1st to 3rd-4th grade. As the test results of colorfastness to acid artificial perspiration, the discoloration degree showed from 1st to 3rd-4th grade and the contamination degree showed from 3rd to 4th-5th grade. As the test results of colorfastness to alkaline artificial perspiration, the discoloration degree showed from 1st to 4th grade and the contamination degree showed from 3rd to 4th-5th grade. The colorfastness to sunlight showed from 1st to 2nd grade. The colorfastness to rubbing showed from 3rd to 4th-5th grade in dry process and from 2nd-3rd to 4th-5th grade in wet process. As the test results of antibiosis, the decrease rate of germs to virus Klebsiella pneumoniae and Staphylococcus aureus showed at least more than 99% after the wash of 10 times. As the test results of antifungal activity to mycete Trichophyton mentagrophytes and Aspergillus niger, the both cotton and silk dyed fabrics didn't gain the significant antifungal effect.

• 대한금속재료학회지
• /
• 제50권12호
• /
• pp.873-882
• /
• 2012

Dual Phase (DP) steel which has a soft ferrite phase and a hard martensite phase reveals both high strength and high ductility and has received increased attention for use in automotive applications. To conduct structural analysis to verify vehicle safety, highly credible experimental results are required. In this study, tensile tests were performed in a strain rate range from $10^{-4}/s$ to 300/s for Sink Roll-Less (SRL) hot-dip metal coated sheets. Collision properties were estimated through simulation by LS-DYNA using the stress-strain curve obtained from the tensile test. The simulation results were compared with the actual crash test results to confirm the credibility of the simulation. In addition, a tensile test and a crash test with 2% prestrain and a baking (PB) specimen were evaluated identically because automotive steel is used after forming and painting. The mechanical behaviors were improved with an increasing strain rate regardless of the PB treatment. Thus, plastic deformation with an appropriate strain rate is expected to result in better formability and crash characteristics than plastic deformation with a static strain rate. The ultimate tensile strength (UTS) and absorbed energy up to 10% strain were improved even though the total elongation decreased after PB treatment, The results of the experimental crash test and computer simulation were slightly different but generally, a similar propensity was seen.

• 한국공간구조학회논문집
• /
• 제15권2호
• /
• pp.69-77
• /
• 2015

Ultra High Performance Fiber Reinforced Concrete (UHPFRC) has a outstanding tensile hardening behaviour after a crack develops, which gives ductility to structures. Existing shear strength model for fiber reinforced concrete is entirely based on crack opening behavior(mode I) which comes from flexural-shear failure, not considering shear-slip behavior(mode II). To find out the mode I and mode II behavior on a crack in UHPFRC simultaneously, maximum shear strength of cracked UHPFRC is investigated from twenty-four push-off test results. The shear stress on a crack is derived as variable of initial crack width and fiber volume ratio. Test results show that shear slippage is proportional to crack opening, which leads to relationship between shear transfer strength and crack width. Based on the test results a hypothesis is proposed for the physical mechanics of shear transfer in UHPFRC by tensile hardening behavior in stead of aggregate interlocking in reinforced concrete. Shear transfer strength based on tensile hardening behavior in UHPFRC is suggested and this suggestion was verified by comparing direct tensile test results and push-off test results.

• 한국해양공학회지
• /
• 제21권6호
• /
• pp.16-25
• /
• 2007

In a companion paper, a rational mechanical model to predict the entire behavior of point-loaded RC slender beams (a/d > 2.5) without shear reinforcement was developed. This paper presents the test results of 9 slender shear beams and compares them with analytical results performed by the proposed model. They are grouped by two parameters, which are shear span ratio and concrete strength. Three kinds of concrete strength the 26.5, 39.2, and 58.8 MPa were included as a major experimental parameter together with different shear span ratios ranging from 3 to 6 depending on the test series. Tests were set up as a traditional 3 point bending test. Various measurements were taken to monitor abrupt shear failure. Test results were not only compared with analytical results from the proposed model, but also other formulas, to consider the various aspects of shear failure such as kinematical conditions or shear capacity. Finally, a review of the proposed model is presented with respect to the shear transfer mechanisms and the effect of test parameters. Results show that several assumptions and proposals adopted in the proposed model are rational and reasonable.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1083-1095
• /
• 2016

The design of Prototype Gen-IV Sodium-Cooled Fast Reactor (PGSFR) has been developed and the validation and verification (V&V) activities to demonstrate the system performance and safety are in progress. In this paper, the current status of test activities is described briefly and significant results are discussed. The large-scale sodium thermal-hydraulic test program, Sodium Test Loop for Safety Simulation and Assessment-1 (STELLA-1), produced satisfactory results, which were used for the computer codes V&V, and the performance test results of the model pump in sodiumshowed good agreement with those in water. The second phase of the STELLA program with the integral effect tests facility, STELLA-2, is in the detailed design stage of the design process. The sodium thermal-hydraulic experiment loop for finned-tube sodium-to-air heat exchanger performance test, the intermediate heat exchanger test facility, and the test facility for the reactor flow distribution are underway. Flow characteristics test in subchannels of a wire-wrapped rod bundle has been carried out for safety analysis in the core and the dynamic characteristic test of upper internal structure has been performed for the seismic analysis model for the PGSFR. The performance tests for control rod assemblies (CRAs) have been conducted for control rod drive mechanism driving parts and drop tests of the CRA under scram condition were performed. Finally, three types of inspection sensors under development for the safe operation of the PGSFR were explained with significant results.

• 한국물환경학회지
• /
• 제33권2호
• /
• pp.181-186
• /
• 2017

This paper aimed to evaluate the results of alternative acute toxicity test on 83 wastewater samples. Each sample was tested by traditional method (using laboratory cultured D. magna as a test organism) and alternative method (using Toxikit which can be purchased from a specialized company). The relationship between Lab. culture toxicity and Toxkits toxicity indicated good relation ($r^2=0.84$, p<0.01, n = 83). Number of samples which showed a small difference of lower than 0.5 between two test methods were 52 and they account for 63 percent of collected samples. In addition, these 52 samples had a lower average toxicity of TU 0.5 (Lab. culture method) and TU 0.45 (Toxkits method). Whereas samples which indicated big difference of test results between two methods, had a tendency to show higher toxicity. From these results, alternative toxicity test method could be applied to the official test method, if samples would have a lower toxicity less than TU 2. Also, Toxikit standard toxicant test results indicated $EC_{50}$ values between 0.93 and 1.68 mg/L and these results were considered as valid for quality control standard.

• 한국도로학회논문집
• /
• 제19권5호
• /
• pp.131-141
• /
• 2017

PURPOSES : The main distress of asphalt pavements in monsoon climate regions are caused by water damage and plastic deformation due to repeated rain season and increased heavy vehicle traffic volume. In this study, the mechanical properties of polymer-modified warm mix asphalt (PWMA) materials are evaluated to use in monsoon climate regions such as Indonesia. METHODS : Comprehensive laboratory tests are conducted to evaluate moisture resistance and permanent deformation resistance for three different asphalt mixtures such as the Indonesian conventional hot-mix asphalt (HMA) mixture, the polymer-modified asphalt mixture, and the polymer-modified warm mix asphalt (PWMA) mixture. Dynamic immersion test and indirect tensile strength ratio test are performed to evaluate moisture resistance. The wheel tracking test is performed to evaluate rutting resistance. Additionally, the Hamburg wheel tracking test is performed to evaluate rutting and moisture resistances simultaneously. RESULTS :The dynamic immersion test results indicate that the PWMA mixture shows the highest resistance to moisture. The indirect tensile strength ratio test indicates that TSR values of PWMA mixture, Indonesian PMA mixture, and Indonesian HMA mixture show 87.2%, 84.1%, and 67.9%, respectively. The wheel tracking test results indicate that the PWMA mixture is found to be more resistant to plastic deformation than the Indonesian PMA. The dynamic stability values are 2,739 times/mm and 3,150 times/mm, respectively. Moreover, the Hamburg wheel tracking test results indicate that PWMA mixture is more resistant to plastic deformation than Indonesian PMA and HMA mixtures. CONCLUSIONS :Based on limited laboratory test results, it is concluded that rutting resistance and moisture susceptibility of the PWMA mixture is superior to Indonesian HMA and Indonesian PMA mixtures. It is postulated that PWMA mixture would be suitable for climate and traffic conditions in Indonesia.

• Physical Therapy Rehabilitation Science
• /
• 제7권1호
• /
• pp.35-40
• /
• 2018

Objective: The purpose of this study was to investigate the immediate effect of applying self-myofascial release (SMR) to the plantar fascia using a foam roller on hamstring and lumbar spine superficial back line (SBL). Design: Randomized controlled trial. Methods: Thirty-one healthy adults agreed to the method and purpose of the study. Selection and exclusion criteria were screened, and baseline measurements for the Toe Touch test and passive straight leg raise (PSLR) test were obtained. The participants were then randomly assigned to the SMR group or the sham group. After group assignment, the SMR group rolled the surface of the foot from the heel to the metatarsal head using a foam roller for 5 minutes. The sham group received passive mobilization of the ankle joint in the supine position. Afterwards, the Toe Touch test and the passive straight leg-raise test were re-assessed. Results: In the SMR group, the Toe Touch test results showed significant improvement (p<0.05). Left and right PSLR test results showed a significant increase (p<0.05). In the sham group, there was no significant difference between pre and post-test results. The SMR group showed a significant difference in the PSLR test and Toe Touch test compared to the sham group (p<0.05). Conclusions: The results of this study showed that SMR on the plantar fascia was immediately effective for improving the flexibility of the SBL of the lumbar spine and hamstring.