• 제목/요약/키워드: test map

검색결과 950건 처리시간 0.029초

한국의 Artemis 국제공동 유인달탐사 참여를 중심으로 우리나라 심우주탐사 로드맵 제안 (Suggestion of Korea's Deep Space Exploration Roadmap through Participation to the Artemis International Manned Lunar Exploration Program)

  • 최기혁;김대영
    • 우주기술과 응용
    • /
    • 제2권1호
    • /
    • pp.52-65
    • /
    • 2022
  • 한국은 '22년 하반기 한국형발사체(KSLV-2)는 2차 발사를 통해 최종 성공을 앞두고 있으며, 인공위성개발 능력은 이미 선진국 수준에 도달하였다. 이러한 발사체와 위성 기술 성숙 이후 향후 대한민국의 우주개발은 우주탐사와 우주활용으로, Hardware 기술개발에서 과학기술 임무개발로, 무인우주개발에서 유인우주개발로 패러다임이 전환되어야 한다. 최우선 전략은 국내 우주산업과 관련 국내 산업을 확대하고 고용을 창출하고, 핵심우주기술이 개발되어야 하며, 국민 편익과 안전에 도움이 되는 우주개발이어야 한다. 이를 위해 유인우주개발을 시작해야 하는데, 20년대 글로벌하게 추진될 국제공동 유인 달탐사(Gateway, Artemis)와 '30년대 유인 화성탐사는 한국의 우주산업 외연을 확장시키고 우주기술 수준을 획기적으로 향상시킬 수 있는 절호의 기회이다. 한국의 고유하고 독자적인 과학기술로서 도전적이며 지속적인 임무수행과 Hardware 기여로 참여하는 것이 필요하다. 또한 한국 우주인의 참여는 국민적 관심을 끌고 청소년에 도전정신과 꿈을 심어 줄 수 있으며, 또한 우주선진국으로 진입하는 계기가 되며 국가위상이 높아지는 효과도 기대할 수 있을 것이다. 이를 위해 본 연구에서는 국제공동 Artemis 계획의 현황과 향후 계획을 상세히 조사·분석하였고, 한국의 참여방안을 제시하였다.

데이터 증강 기반 회귀분석을 이용한 N치 예측 (A Prediction of N-value Using Regression Analysis Based on Data Augmentation)

  • 김광명;박형준;이재범;박찬진
    • 지질공학
    • /
    • 제32권2호
    • /
    • pp.221-239
    • /
    • 2022
  • 플랜트, 토목 및 건축 사업에서 말뚝 설계 시 어려움을 겪는 주된 요인은 지반 특성의 불확실성이다. 특히 표준관입시험을 통해 구한 N치가 설계 시 주요 입력값이나 짧은 입찰기간과 광범위한 구역에서 다수의 현장시험을 실시하는 것은 실제적으로 어려운 상황이다. 본 연구에서는 인공지능(AI)을 가지고 회귀분석을 적용하여 N치를 예측하는 연구를 수행하였으며, 최소한의 시추자료를 학습시킨 후 표준관입시험을 실시하지 못한 곳에서 N치를 예측하는데 그 목적이 있다. AI의 학습 성능을 높이기 위해서는 빅 데이터가 중요하며, 금회 연구 시 부족한 시추자료를 빅 데이터화 하는데 '원형증강법'을 적용하여 시추반경 2 m까지 가상 N치를 생성시키는 작업을 선행하였다. AI 모델 중 인공신경망, 의사결정 나무, 오토 머신러닝을 각각 적용하였으며 이 중 최적의 모델을 선택하였다. 최적의 모델을 선택하는 방법은 세 가지의 예측된 AI 모델 중 최소 오차값을 가지는 것이다. 이를 위해 폴란드, 인도네시아, 말레이시아에서 수행한 6개 프로젝트를 대상으로 표준관입시험의 실측N치와 AI의 예측N치를 비교하여 타당성 여부를 연구하였고, 연구 결과 AI 예측값에 대한 신뢰도가 높은 것으로 분석되었다. AI 예측값을 가지고 미시추 구간에서 지반특성을 파악 할 수 있었으며 3차원 N치 분포도를 사용하면 최적의 구조물 배치가 가능함을 확인하였다.

심볼 테이블을 이용한 펌웨어 리눅스 커널 버전 정적 식별 기법 (Static Identification of Firmware Linux Kernel Version by using Symbol Table)

  • 김광준;최여정;김윤정;이만희
    • 정보보호학회논문지
    • /
    • 제32권1호
    • /
    • pp.67-75
    • /
    • 2022
  • 장비 도입 시 해당 장비에 설치된 커널의 정확한 버전을 식별하는 것은 매우 중요하다. 특정 커널 버전에 취약점이 발견된 경우 이에 대해 조치 여부를 판단하거나, 특정 커널 버전의 제외 또는 포함 등에 대한 도입 요구 조건이 있는 경우 이를 판단하는데 사용될 수 있기 때문이다. 하지만 많은 시스템 및 네트워크 장비 제조업체들은 공식적으로 배포되고 있는 리눅스 기저 커널을 그대로 사용하지 않고, 장비에 최적화된 펌웨어를 제작하기 위해 커널을 수정하여 사용하므로 리눅스 커널 버전을 판단하기 어려운 상황이 발생한다. 또한, 커널의 패치가 공개될 경우 제조사는 수정한 커널에 패치 내용을 반영하므로, 이런 과정이 지속될 경우 커스터마이징된 커널은 리눅스 기저 커널과 매우 다른 형상이 된다. 따라서, 특정 파일 존재 여부 등의 단순한 방법으로는 리눅스 커널을 정확히 식별하기 어렵다. 새로운 리눅스 커널 버전이 공개될 때는 새로운 함수가 포함되기도 하고 기존 함수가 삭제되기도 한다. 본 논문에서는 심볼 테이블에 저장된 함수명을 이용하여 펌웨어 커널 버전의 정적 식별 방안을 제안하고 실험을 통해 그 실효성을 증명하였다. 100개의 리눅스 펌웨어를 대상으로 한 실험에서 99%의 정확도로 리눅스 커널 버전을 식별할 수 있었다. 본 연구를 통해 펌웨어 이용 환경의 보안성 향상에 기여할 것으로 기대한다.

APPLICATION OF WIFI-BASED INDOOR LOCATION MONITORING SYSTEM FOR LABOR TRACKING IN CONSTRUCTION SITE - A CASE STUDY in Guangzhou MTR

  • Sunkyu Woo;Seongsu Jeong;Esmond Mok;Linyuan Xia;Muwook Pyeon;Joon Heo
    • 국제학술발표논문집
    • /
    • The 3th International Conference on Construction Engineering and Project Management
    • /
    • pp.869-875
    • /
    • 2009
  • Safety is a big issue in the construction sites. For safe and secure management, tracking locations of construction resources such as labors, materials, machineries, vehicles and so on is important. The materials, machineries and vehicles could be controlled by computer, whereas the movement of labors does not have fixed pattern. So, the location and movement of labors need to be monitored continuously for safety. In general, Global Positioning System(GPS) is an opt solution to obtain the location information in outside environments. But it cannot be used for indoor locations as it requires a clear Line-Of-Sight(LOS) to satellites Therefore, indoor location monitoring system could be a convenient alternative for environments such as tunnel and indoor building construction sites. This paper presents a case study to investigate feasibility of Wi-Fi based indoor location monitoring system in construction site. The system is developed by using fingerprint map of gathering Received Signal Strength Indication(RSSI) from each Access Point(AP). The signal information is gathered by Radio Frequency Identification (RFID) tags, which are attached on a helmet of labors to track their locations, and is sent to server computer. Experiments were conducted in a shield tunnel construction site at Guangzhou, China. This study consists of three phases as follows: First, we have a tracking test in entrance area of tunnel construction site. This experiment was performed to find the effective geometry of APs installation. The geometry of APs installation was changed for finding effective locations, and the experiment was performed using one and more tags. Second, APs were separated into two groups, and they were connected with LAN cable in tunnel construction site. The purpose of this experiment was to check the validity of group separating strategy. One group was installed around the entrance and the other one was installed inside the tunnel. Finally, we installed the system inner area of tunnel, boring machine area, and checked the performance with varying conditions (the presence of obstacles such as train, worker, and so on). Accuracy of this study was calculated from the data, which was collected at some known points. Experimental results showed that WiFi-based indoor location system has a level of accuracy of a few meters in tunnel construction site. From the results, it is inferred that the location tracking system can track the approximate location of labors in the construction site. It is able to alert the labors when they are closer to dangerous zones like poisonous region or cave-in..

  • PDF

AHP분석을 활용한 무용진로개입의 체계적 접근 방안 : 직업지도, 진로교육 및 상담을 중심으로 (Exploration of the Dance Career Intervention by AHP Method: Focusing on Vocational Guidance, Career Education and Career Counseling)

  • 김지영;임수진;김형남
    • 한국체육학회지인문사회과학편
    • /
    • 제55권6호
    • /
    • pp.661-676
    • /
    • 2016
  • 이 연구의 목적은 무용전공자들을 위한 진로개입의 체계적인 접근 방안을 제시하는 것이다. 의사결정의 종합적인 평가와 합의를 도출하기 위하여 델파이와 계층구조분석(AHP)을 실시하였다. 연구결과, 총 4개 영역의 16개 요소가 도출되었다. 직업지도에서는 '다양한 무용직업 세계의 이해', 진로교육에서는 '구체적인 진로설계와 목표설정', 진로상담에서는 '삶과 연계한 무용진로의 내러티브 지도', 진로개입 네트워크에서는 '무용일자리 박람회 및 워크숍 정례화'를 각각 가장 중요시하는 것으로 나타났다. 모든 요인의 복합가중치에서는 진로설계와 목표설정, 다양한 무용직업 세계의 이해 등 전반적으로 진로교육과 직업지도가 중요하게 요구되고 있는 것으로 확인되었다. 이를 토대로 무용진로개입의 방안은 다양한 무용직업과 이중경력을 통한 진로대안의 확장, 다각화된 무용진로개발로드맵의 교육과정 적용, 무용진로개입 진단도구 및 성과준거의 개발, 체계적인 진로개입을 위한 무용교육자들의 전문교육과 인식제고, 민·관·학의 네트워크 조직화 등이 제시되었다. 이 연구는 Holland(1997)의 진로탐색이론, Super(1990)의 진로발달이론, 그리고 Savickas(2005)의 진로구성이론 등 진로개입의 다양한 관점에 기초하여 무용전공자를 위한 진로개입의 역동적인 실제와 체계적인 접근 방안에 대하여 논의하였다.

스캔통계량 분석을 통한 상수도 누수 및 수질 민원 발생 클러스터 탐색 (Cluster exploration of water pipe leak and complaints surveillance using a spatio-temporal statistical analysis)

  • 이주원;김은주;남숙현;황태문
    • 상하수도학회지
    • /
    • 제37권5호
    • /
    • pp.261-269
    • /
    • 2023
  • In light of recent social concerns related to issues such as water supply pipe deterioration leading to problems like leaks and degraded water quality, the significance of maintenance efforts to enhance water source quality and ensure a stable water supply has grown substantially. In this study, scan statistic was applied to analyze water quality complaints and water leakage accidents from 2015 to 2021 to present a reasonable method to identify areas requiring improvement in water management. SaTScan, a spatio-temporal statistical analysis program, and ArcGIS were used for spatial information analysis, and clusters with high relative risk (RR) were determined using the maximum log-likelihood ratio, relative risk, and Monte Carlo hypothesis test for I city, the target area. Specifically, in the case of water quality complaints, the analysis results were compared by distinguishing cases occurring before and after the onset of "red water." The period between 2015 and 2019 revealed that preceding the occurrence of red water, the leak cluster at location L2 posed a significantly higher risk (RR: 2.45) than other regions. As for water quality complaints, cluster C2 exhibited a notably elevated RR (RR: 2.21) and appeared concentrated in areas D and S, respectively. On the other hand, post-red water incidents of water quality complaints were predominantly concentrated in area S. The analysis found that the locations of complaint clusters were similar to those of red water incidents. Of these, cluster C7 exhibited a substantial RR of 4.58, signifying more than a twofold increase compared to pre-incident levels. A kernel density map analysis was performed using GIS to identify priority areas for waterworks management based on the central location of clusters and complaint cluster RR data.

급성 허혈성 뇌경색 환자에서 동맥스핀표지 관류자기공명영상의 유용성 (Clinical Usefulness of Arterial Spin Labeling Perfusion MR Imaging in Acute Ischemic Stroke)

  • 오근택;정홍량;임청환;조영기;하본철;홍동희
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제34권4호
    • /
    • pp.323-331
    • /
    • 2011
  • 본 연구는 급성 허혈성 뇌경색 환자에서 동맥스핀표지 관류자기공명영상의 임상적 유용성을 평가하고자 하였다. 급성 허혈성 뇌경색 증상으로 응급실로 내원한 환자 중 확산강조영상(DWI)의 병변의 크기가 3 cm 이상이고 역동적 자화율대조 조영증강 관류자기공명(DSC)영상, 동맥스핀표지 관류자기공명(ASL)영상을 모두 시행한 22명과 정량적 분석을 위한 정상대조군 36명을 대상으로 하였다. 사용된 장비로는 Siemens Magnetom Verio 3.0 T이고 12 Chanel Head Coil을 사용하였다. 정성적 평가는 rMTT, TTP, rCBF, rCBV, ASL지도의 병변 인지도평가와 확산강조영상과 병변의 크기 비교평가를 하였고 정량적 평가는 각 관류영상의 평균 상대값을 Mann-Whitney U test를 사용하여 병변 그룹과 정상군 그룹의 유의성을 분석한 결과는 다음과 같다. 첫째, 병변의 인지도평가에서 TTP(95.5%), rCBF(95.5%), 지도가 가장 높았고, 둘째, 최종 뇌경색부위 연관성은 rCBV와 rCBF지도가 높게 나타났다. 셋째, 정량적 분석에서는 병변그룹의 평균 상대값은 유의하게 나타났다(p<0.05). 동맥스핀표지 관류자기공명(ASL)영상은 높은 병변의 인지율을 보여 임상에서 적용가능하다 생각되며, 정량적 상대값은 제시하기 어렵지만 참고적 자료로 사용될 수 있을 것이며 향후 지속적 연구를 한다면 뇌경색의 조기진단, 허혈성 반영부의 존재여부와 범위, 혈류역동학적평가가 가능함으로써 치료방침을 정하고 예후를 파악하는데 ASL영상이 유용할 것으로 사료된다.

단일형 거동함수에 의한 얕은 기초의 신뢰도 해석 -임해퇴적층의 토성자료를 중심으로- (A Reliability Analysis of Shallow Foundations using a Single-Mode Performance Function)

  • 김용필;임병조
    • 한국지반공학회지:지반
    • /
    • 제2권1호
    • /
    • pp.27-44
    • /
    • 1986
  • 기초 구조물 설계에 있어서 지지력 및 압밀 침하량 산정식을 각각 단일 모우드 거동함수(perfor trance function)로 설정하여 실측된 토성자초를 확률변수로 취해서 기술류계학적 분석을 기행했다. 이 분석결과로서 얕은 기초가 파괴상태에 이르렀을 때의 신뢰도와 그 때에 거동되고 있는 설계변수치(check points)를 "Advanced first-order second moment method"로 구했다. 설계변수들 사이의 관계를 무연관-정규분포, 무상관-비정규분포, 유상관-정규분포 및 유상관-비정규분포 등의 유형 으로 분류하여 신뢰도 및 설계변수치를 비교 검토하여 얻은 주요한 결론은 다음과 같다. 1. 지지력 모우드 1) CU test 의한 점착력과 tans사이에는 약한 음상관치 있으며, 각각 대규분포 및 대수정륜 분포를 한다. 2) 신뢰지수를 2.34로 제한했을 경우, 유상관-대수정규분포 유형의 지지력은 18.6t/m2으로서 가장 낮게 되므로, 이 이외의 유형은 지반조건을 과대평가할 우려가 있다. 2. 압밀 침하량 모우드 1) 압축비(compression ratio) 및 선행 압밀응력은 각각 정규분포 및 대수정규분포를 이루며, 이들의 상관성은 연계적 독립변수로 취급해도 좋을 만큼 매우 낮다. 2) 압밀 침하량을 확정론적 방법으로 산출한 16cm보다 더 낮게 취하면, 유상관일대수정규분포류 형의 신뇌맥가 가장 낮게 평가된다. 따라서, 얕은 기초 구조물을 신뇌도나 파괴확률을 해석하는 데 있어서, 정확한 확률밀도함수로서 복잡한 수치적분에 의한 엄밀해보다는 개략적인 확률분포형태와 비교적 쉽게 얻어지는 공분산까지를 고려하면, 기초의 지반조건이 과소평가될 우려가 없다.가될 우려가 없다.의 뽕밭에 발생한 발아불량현상의 원인은 주인이 저온에 의한 동해라고 볼 수 있으며 지역적으로는 붕소결핍에 의한 발아불량현상도 적지 않았고 특히 붕소결핍이 동해피해를 가속화시켰다고 볼 수 있다.dard deviation)were estimated, and diagram which shows the relationship between mean annual maximum rainfall($$) and frequency factor for each durations were drawn. PMP was estimated by statistical method using the PMP frequency factor obtained from the diagram and statistics($$, Sn). The PMP-Duration Equation was derived from the envelope curve in order to obtain the PMP for an arbitrary duration. The isohyetal map of 24 hours PMP and PMP. DAD curve for the whole of Korea were drawn in accordance with the point PMP values.el size는 거의 차이가 없었는데, 특히 수당영화수 및 sink용량에 대한 주연효과정도는 계통에 따라 상당한 차이를 보였다. 계통의 자체경쟁정도는 출수후보다는 출수전 생식생장기간에 더욱 심하고 계통간차이도 큰 것 같았다. 일반적으로 수당sink용량이 클수록 출수전 자체경쟁정도가 심한 경향이었으나 계통에 따라서는 수당 sink용량이 작으면서 자체경쟁도가 심한 것(수원264호 등)이

  • PDF

공기중과 수중에서 보관한 총의치 의치상의 체적변화에 대한 비교연구 (Comparative study of volumetric change in water-stored and dry-stored complete denture base)

  • 김진선;이영후;홍성진;백장현;노관태;배아란;김형섭;권긍록
    • 대한치과보철학회지
    • /
    • 제59권1호
    • /
    • pp.18-26
    • /
    • 2021
  • 목적: 일반적으로 총의치는 환자의 구내에서 제거 시 물에 담가 보관하도록 설명하는데, 수중에서의 총의치의 보관이 상온의 공기중에서 총의치를 보관하는 것과 비교해 체적 안정성에 장점이 있는지에 대한 연구는 부족하다. 본 연구는 의치의 올바른 보관 방법을 규정하는 데에 참고가 될 수 있도록, 수중에서 보관하는 경우와 공기중에 보관하는 경우에 의치상의체적 변화량과 양상을 평가하는 것을 목적으로 한다. 재료 및 방법: 초경석고로 제작한 주모형을 디지털 스캔하여, computer-aided design (CAD) 소프트웨어를 이용해 총의치 의치상을 디자인하고, 3D printing 기법을 이용하여 상악과 하악 각 6개의 시편을 제작하였다. 이를 매몰한 후 열중합 방식으로 온성하여 제작한 레진의치상을 상악과 하악 각 3개씩 그룹 A와 그룹 B로 나누었다. 그룹 A는 상온의 공기중에서 보관되었고, 그룹 B는 상온의 물에 담가 보관하며 24시간 간격으로 28일 동안 스캔하여 stereolithogrphy (SLA) 파일로 저장하였다. 이를 분석하여 한달 간의 체적변화를 측정하였고, best-fit 알고리즘을 이용하여 중첩시켜 3차원 비교 컬러맵을 이용하여 의치상 인상면의 변화 양상을 관찰하였다. 측정한 값은 Kruskal-Wallis test를 이용하여 분석하였다. 결과: 보관방법에 상관없이 총 체적에는 유의한 변화가 없었으나, 공기 중에서 보관한 의치상의 경우 상악 구개부와 하악 구치부 설측 변연에서 조직과 멀어지는 방향으로, 상악 결절부와 하악 후구치 삼각 융기 부위에서는 조직을 압박하는 방향으로 통계적으로 유의한 변화를 보였다. 결론: 수중에서의 의치 보관은 공기중에서의 의치 보관에 비해 의치상 인상면의 변화가 적게 나타났다.

Perceptional Change of a New Product, DMB Phone

  • Kim, Ju-Young;Ko, Deok-Im
    • 마케팅과학연구
    • /
    • 제18권3호
    • /
    • pp.59-88
    • /
    • 2008
  • Digital Convergence means integration between industry, technology, and contents, and in marketing, it usually comes with creation of new types of product and service under the base of digital technology as digitalization progress in electro-communication industries including telecommunication, home appliance, and computer industries. One can see digital convergence not only in instruments such as PC, AV appliances, cellular phone, but also in contents, network, service that are required in production, modification, distribution, re-production of information. Convergence in contents started around 1990. Convergence in network and service begins as broadcasting and telecommunication integrates and DMB(digital multimedia broadcasting), born in May, 2005 is the symbolic icon in this trend. There are some positive and negative expectations about DMB. The reason why two opposite expectations exist is that DMB does not come out from customer's need but from technology development. Therefore, customers might have hard time to interpret the real meaning of DMB. Time is quite critical to a high tech product, like DMB because another product with same function from different technology can replace the existing product within short period of time. If DMB does not positioning well to customer's mind quickly, another products like Wibro, IPTV, or HSPDA could replace it before it even spreads out. Therefore, positioning strategy is critical for success of DMB product. To make correct positioning strategy, one needs to understand how consumer interprets DMB and how consumer's interpretation can be changed via communication strategy. In this study, we try to investigate how consumer perceives a new product, like DMB and how AD strategy change consumer's perception. More specifically, the paper segment consumers into sub-groups based on their DMB perceptions and compare their characteristics in order to understand how they perceive DMB. And, expose them different printed ADs that have messages guiding consumer think DMB in specific ways, either cellular phone or personal TV. Research Question 1: Segment consumers according to perceptions about DMB and compare characteristics of segmentations. Research Question 2: Compare perceptions about DMB after AD that induces categorization of DMB in direction for each segment. If one understand and predict a direction in which consumer perceive a new product, firm can select target customers easily. We segment consumers according to their perception and analyze characteristics in order to find some variables that can influence perceptions, like prior experience, usage, or habit. And then, marketing people can use this variables to identify target customers and predict their perceptions. If one knows how customer's perception is changed via AD message, communication strategy could be constructed properly. Specially, information from segmented customers helps to develop efficient AD strategy for segment who has prior perception. Research framework consists of two measurements and one treatment, O1 X O2. First observation is for collecting information about consumer's perception and their characteristics. Based on first observation, the paper segment consumers into two groups, one group perceives DMB similar to Cellular phone and the other group perceives DMB similar to TV. And compare characteristics of two segments in order to find reason why they perceive DMB differently. Next, we expose two kinds of AD to subjects. One AD describes DMB as Cellular phone and the other Ad describes DMB as personal TV. When two ADs are exposed to subjects, consumers don't know their prior perception of DMB, in other words, which subject belongs 'similar-to-Cellular phone' segment or 'similar-to-TV' segment? However, we analyze the AD's effect differently for each segment. In research design, final observation is for investigating AD effect. Perception before AD is compared with perception after AD. Comparisons are made for each segment and for each AD. For the segment who perceives DMB similar to TV, AD that describes DMB as cellular phone could change the prior perception. And AD that describes DMB as personal TV, could enforce the prior perception. For data collection, subjects are selected from undergraduate students because they have basic knowledge about most digital equipments and have open attitude about a new product and media. Total number of subjects is 240. In order to measure perception about DMB, we use indirect measurement, comparison with other similar digital products. To select similar digital products, we pre-survey students and then finally select PDA, Car-TV, Cellular Phone, MP3 player, TV, and PSP. Quasi experiment is done at several classes under instructor's allowance. After brief introduction, prior knowledge, awareness, and usage about DMB as well as other digital instruments is asked and their similarities and perceived characteristics are measured. And then, two kinds of manipulated color-printed AD are distributed and similarities and perceived characteristics for DMB are re-measured. Finally purchase intension, AD attitude, manipulation check, and demographic variables are asked. Subjects are given small gift for participation. Stimuli are color-printed advertising. Their actual size is A4 and made after several pre-test from AD professionals and students. As results, consumers are segmented into two subgroups based on their perceptions of DMB. Similarity measure between DMB and cellular phone and similarity measure between DMB and TV are used to classify consumers. If subject whose first measure is less than the second measure, she is classified into segment A and segment A is characterized as they perceive DMB like TV. Otherwise, they are classified as segment B, who perceives DMB like cellular phone. Discriminant analysis on these groups with their characteristics of usage and attitude shows that Segment A knows much about DMB and uses a lot of digital instrument. Segment B, who thinks DMB as cellular phone doesn't know well about DMB and not familiar with other digital instruments. So, consumers with higher knowledge perceive DMB similar to TV because launching DMB advertising lead consumer think DMB as TV. Consumers with less interest on digital products don't know well about DMB AD and then think DMB as cellular phone. In order to investigate perceptions of DMB as well as other digital instruments, we apply Proxscal analysis, Multidimensional Scaling technique at SPSS statistical package. At first step, subjects are presented 21 pairs of 7 digital instruments and evaluate similarity judgments on 7 point scale. And for each segment, their similarity judgments are averaged and similarity matrix is made. Secondly, Proxscal analysis of segment A and B are done. At third stage, get similarity judgment between DMB and other digital instruments after AD exposure. Lastly, similarity judgments of group A-1, A-2, B-1, and B-2 are named as 'after DMB' and put them into matrix made at the first stage. Then apply Proxscal analysis on these matrixes and check the positional difference of DMB and after DMB. The results show that map of segment A, who perceives DMB similar as TV, shows that DMB position closer to TV than to Cellular phone as expected. Map of segment B, who perceive DMB similar as cellular phone shows that DMB position closer to Cellular phone than to TV as expected. Stress value and R-square is acceptable. And, change results after stimuli, manipulated Advertising show that AD makes DMB perception bent toward Cellular phone when Cellular phone-like AD is exposed, and that DMB positioning move towards Car-TV which is more personalized one when TV-like AD is exposed. It is true for both segment, A and B, consistently. Furthermore, the paper apply correspondence analysis to the same data and find almost the same results. The paper answers two main research questions. The first one is that perception about a new product is made mainly from prior experience. And the second one is that AD is effective in changing and enforcing perception. In addition to above, we extend perception change to purchase intention. Purchase intention is high when AD enforces original perception. AD that shows DMB like TV makes worst intention. This paper has limitations and issues to be pursed in near future. Methodologically, current methodology can't provide statistical test on the perceptual change, since classical MDS models, like Proxscal and correspondence analysis are not probability models. So, a new probability MDS model for testing hypothesis about configuration needs to be developed. Next, advertising message needs to be developed more rigorously from theoretical and managerial perspective. Also experimental procedure could be improved for more realistic data collection. For example, web-based experiment and real product stimuli and multimedia presentation could be employed. Or, one can display products together in simulated shop. In addition, demand and social desirability threats of internal validity could influence on the results. In order to handle the threats, results of the model-intended advertising and other "pseudo" advertising could be compared. Furthermore, one can try various level of innovativeness in order to check whether it make any different results (cf. Moon 2006). In addition, if one can create hypothetical product that is really innovative and new for research, it helps to make a vacant impression status and then to study how to form impression in more rigorous way.

  • PDF