• 제목/요약/키워드: test circuit

검색결과 1,838건 처리시간 0.028초

Sn-3.0Ag-0.5Cu 솔더범프의 금속간화합물 성장거동에 미치는 PCB 표면처리의 영향 (Effect of PCB Surface Finishs on Intermetallic Compound Growth Kinetics of Sn-3.0Ag-0.5Cu Solder Bump)

  • 정명혁;김재명;유세훈;이창우;박영배
    • 마이크로전자및패키징학회지
    • /
    • 제17권1호
    • /
    • pp.81-88
    • /
    • 2010
  • Sn-3.0Ag-0.5Cu 솔더범프의 금속간화합물 성장거동에 미치는 PCB 표면처리의 영향을 알아보기 위해서 PCB 패드 표면에 각각 OSP, immersion Sn, 그리고 ENIG를 처리하였고, 열처리는 $150^{\circ}C$ 조건에서 실험을 실시하였다. 또한, 전류인가시 Sn-3.0Ag-0.5Cu 솔더범프의 접합부 계면반응에 미치는 표면처리의 영향을 알아보기 위해서 $150^{\circ}C$, $4{\times}10^3\;A/cm^2$ 조건에서 electromigration특성을 비교 평가하였다. 열처리시 OSP와 immersion Sn의 금속간화합물 성장거동은 서로 비슷한 경향을 보인 반면, ENIG는 다른 표면처리에 비해 훨씬 느린 성장거동을 보였다. electromigration특성 평가결과 열처리에 비해 금속간화합물의 성장이 가속화되나 표면처리별 경향은 유사하였고, 전자 이동 방향에 따른 음극-양극에서 금속간화합물 형성의 차이를 보이는 극성효과(polarity effect)가 나타나는 것을 알 수 있었다.

On-line Temperature Monitoring of the GIS Contacts Based on Infrared Sensing Technology

  • Li, Qingmin;Cong, Haoxi;Xing, Jinyuan;Qi, Bo;Li, Chengrong
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권4호
    • /
    • pp.1385-1393
    • /
    • 2014
  • Gas insulated switchgear (GIS) is widely used in the power systems, however, the contacts overheating of the inside circuit breaker or disconnector may be a potential cause of developing accidents. As the temperature of the contacts cannot be directly acquired due to existence of the metallic shield, an infrared sensor is adopted to directly measure the temperature of the shield and then the contacts temperature can be indirectly obtained by data fitting, based on which the on-line temperature monitoring technology specifically for GIS contacts based on infrared sensing is proposed in this paper. A real GIS test platform is constructed and experimental studies are carried out to account for the influential factors that affect the accuracy of the infrared temperature measurement. A heat transfer model of the GIS module is also developed, together with experimental studies, the nonlinear temperature relationship among the contacts, the metallic shield and the environment based on a neural network algorithm is established. Finally, an integrated on-line temperature monitoring system for the GIS contacts is developed for on-site applications.

WLL용 CDMA 시스템 IF 모듈의 구현 및 위상 특성 (On the Phase Variation and Implementation of If Module for WLL CDMA System)

  • 강병권;김선형
    • 한국정보통신학회논문지
    • /
    • 제4권1호
    • /
    • pp.219-226
    • /
    • 2000
  • 본 논문에서는 WLL 광대역 코드분할 다원 접속(Wideband CDMA) 시스템 기지국용 If(Intermediate Frequency) 송수신기의 설계 및 구현에 대하여 고찰하였다. 제작된 IF 송수신기는 송신단, 수신단, 국부발진기로 구성되었다. 처리되는 신호의 대역폭을 10MHz로 고려하여 IF 반송파는 40MHz로 설계하였으며, 측정 결과 IF 송신단의 출력 전력은 기저 대역 입력이 -10dBm $\pm3dB$ 일 때 40MHz에서 -5dBm $\pm3dB$, 수신단의 출력 전력은 IF 대역 입력이 -5dBm $\pm3dB$ 일 때 기저대역에서 -10dBm $\pm3dB$의 특성을 얻었다. 또한, 자동이득 조절 루프는 -7dBm에서 +2dBm까지의 9dB 입력 범위에서 동작하여 약 2dBm의 일정한 레벨을 출력시켰고, 1MHz부터 5MHz까지의 신호를 스윕시켜 IF시스템 내에서의 위상 변화를 관찰한 결과 위상 왜곡이 매우 적어 데이터 통신시스템에 적용이 가능함을 보였다.

  • PDF

전력품질 향상기기의 실증시험을 위한 2MVA SSFG(Sag Swell Flicker Generator) 개발 (2MVA SSFG(Sag Swell Flicker Generator) Development for Actual Test of Custom Power Device)

  • 김희중;정용호;권기현;박태범;문전일;전영수
    • 전력전자학회논문지
    • /
    • 제10권6호
    • /
    • pp.626-633
    • /
    • 2005
  • 본 논문에서는 직렬인버터를 이용한 2MVA SSFG(Sag Swell Flicker Generator)를 제안하였으며, 제안된 SSFG는 직렬인버터, DC 커패시터, 정류기, 클램프회로 등으로 구성되어 있다. SSFG는 선로에 순간전압강하/상승(sag/swell), 과전압/저전압(over/under voltage), 플리커(Flicker)등과 같은 전형적인 외란을 발생할 수 있을 뿐만 아니라, 인버터의 제어를 통해 상 뒤틀림(phase jump)도 구현 가능하다. 본 논문에서 제안된 2MVA SSFG의 효과적인 제어를 위해 세 가지 형태의 제어방식을 PSIM 시뮬레이션을 통해 비교${\cdot}$검토하였으며, 이 중 가장 효과적인 제어방식을 2MVA SSFG에 적용하여 순간전압강하, 순간전압상승, 플리커 등과 같은 외란발생 시험을 수행하였다.

Laval Nozzle에 대한 $SF^6$ 아크의 열적회복특성 해석 (Analysis of Thermal Recovery Characteristics for $SF^6$ Gas-Blast Arc within Laval Nozzle)

  • 송기동;이병윤;박경엽;박정후
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제51권9호
    • /
    • pp.522-529
    • /
    • 2002
  • In this paper, computer simulations of the physical Phenomena occurring in the arc region before and after current zero were carried out to evaluate the thermal recovery characteristics of a Laval nozzle. A commercial CFD program "PHOENICS" is used for the simulation and the user-coded subroutines to consider the arcing phenomena were added to this program by the authors. The computed results were verified by the comparison with the test results presented by the research group of GE Co.(General Electric Company). In order to investigate the state of the arc region after current zero, the simulation was carried out with three steps. They are steady state arc simulation, transient arc simulation before current zero, and transient hot-gas flow simulation after current zero. The semi-experimental arc radiation model is adapted to consider the radiation energy transport and Prandtl's mixing length model is employed as the turbulence model. The electric field and the magnetic field were calculated with the same grid structure used for the simulation of the flow field. The post-arc current was calculated to evaluate the thermal recovery characteristics after current zero. Compared with the results obtained by GE Co., it has been found that the critical RRRV(ratio of rise of recovery voltage) will be determined previously by this study.his study.

전철 탑재용 피뢰기의 설계 및 성능평가 (Design and Performance Evaluation of Surge Arrester for Loading in Railway Rolling Stock)

  • 조한구;한세원;이운용;김석수;장태봉
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 춘계학술대회 논문집 유기절연재료 방전 플라즈마
    • /
    • pp.74-77
    • /
    • 2000
  • The main objective of this paper is to design and test a new type of polymer ZnO surge arrester for AC power system of railroad vehicles. Metal oxide surge arrester for most electric power system applications, electric train and must not have explosive breakage of the housing to minimize damage to other equipment when subjected to internal high short circuit current. When breakdown of ZnO elements in a surge arrester occurs due to flashover, fault short current flows through the arrester and internal pressure of the arrester rises. The pressure rise can usually be limited by fitting a pressure relief diaphragm and transferring the arc from the inside to the outside of the housing. However, there is possibility of porcelain fragmentation caused by the thermal shock. pressure rise, etc. Non-fragmenting of the housing is the most desired way to prevent damage to other equipment. The pressure change which is occurred by flashover become discharge energy. This discharge energy raises to damage arrester housing and arrester housing is dispersed as small fragment. Therefore, the pressure relief design is requested to obstruct housing dispersion. The main research works are focused on the structure design by finite element method, pressure relief of module, and studies of performance of surge arrester for electric railway vehicle.

  • PDF

PLS와 SVM복합 알고리즘을 이용한 식각 종료점 검출 (Endpoint Detection Using Hybrid Algorithm of PLS and SVM)

  • 이윤근;한이슬;홍상진;한승수
    • 한국전기전자재료학회논문지
    • /
    • 제24권9호
    • /
    • pp.701-709
    • /
    • 2011
  • In semiconductor wafer fabrication, etching is one of the most critical processes, by which a material layer is selectively removed. Because of difficulty to correct a mistake caused by over etching, it is critical that etch should be performed correctly. This paper proposes a new approach for etch endpoint detection of small open area wafers. The traditional endpoint detection technique uses a few manually selected wavelengths, which are adequate for large open areas. As the integrated circuit devices continue to shrink in geometry and increase in device density, detecting the endpoint for small open areas presents a serious challenge to process engineers. In this work, a high-resolution optical emission spectroscopy (OES) sensor is used to provide the necessary sensitivity for detecting subtle endpoint signal. Partial Least Squares (PLS) method is used to analyze the OES data which reduces dimension of the data and increases gap between classes. Support Vector Machine (SVM) is employed to detect endpoint using the data after PLS. SVM classifies normal etching state and after endpoint state. Two data sets from OES are used in training PLS and SVM. The other data sets are used to test the performance of the model. The results show that the trained PLS and SVM hybrid algorithm model detects endpoint accurately.

Hydraulic Evaluation and Performance of On-Site Sanitation Systems in Central Thailand

  • Koottatep, Thammarat;Eamrat, Rawintra;Pussayanavin, Tatchai;Polprasert, Chongrak
    • Environmental Engineering Research
    • /
    • 제19권3호
    • /
    • pp.269-274
    • /
    • 2014
  • On-site sanitation systems are typically installed to treat grey and toilet wastewaters in areas without sewer and centralized treatment systems. It is well known that, due to inappropriate design and operation, treatment performance of these systems in developing countries is not satisfactory in the removal of pathogens and organic matters. This research aimed to investigate the hydraulic conditions occurring in some on-site sanitation systems and the effects of hydraulic retention times (HRTs) on the system performance. The experiments were conducted with a laboratory-scale septic tank (40L in size) and an actual septic tank (600L in size), to test the hydraulic conditions by using tracer study with HRTs varying at 12, 24 and 48 hr. The experimental results showed the dispersion numbers to be in the range of 0.017-0.320 and the short-circuit ratios in the range of 0.014-0.031, indicating the reactors having a high level of sort-circuiting and approaching complete-mix conditions. The removal efficiency of $BOD_5$ was found to be 67% and the $k_{30}$ values for $BOD_5$ was $2.04day^{-1}$. A modified complete-mix model based on the relationship between $BOD_5$ removal efficiencies and HRTs was developed and validated with actual-scale septic tank data having a correlation coefficient ($R^2$) of 0.90. Therefore, to better protect our environment and minimizing health risks, new generation toilets should be developed that could minimize short-circuiting and improving treatment performance.

우주, 군 응용을 위한 상업용 집적회로부품의 신뢰성 평가 (Reliability Evaluation of COTS Integrated Circuits for Military and Space Applications)

  • 천성일;한창운
    • 한국항공우주학회지
    • /
    • 제40권12호
    • /
    • pp.1093-1098
    • /
    • 2012
  • 고 신뢰성을 요구하는 우주, 군 등과 같은 응용분야에 집적회로 사용에 대한 필요성이 증가하고 있다. 따라서 상업용(Commercial Off The Shelf) 집적회로부품에 대한 신뢰성 보증 요구조건과 실험규격에 대한 연구가 매우 필요하다. 본 연구에서는 ECSS(European Cooperation for Space Standardization) 품질규격과 MIL-STD-883(집적회로 시험방법)을 기초하여 상업용 집적회로부품의 신뢰성 검증(evaluation)을 위한 스크린(Screening) 실험방법을 검토하였다. 그리고 상업용 부품에 대한 스크린 시험절차와 검사방법을 제안하였다. 또한, 제안한 시험절차와 방법에 맞추어 상업용 Linear Bipolar 집적회로를 평가하였다. 시험결과 상업용 Linear Bipolar 제품이 고 신뢰성 활용을 위한 신뢰성 요구조건을 모두 만족하는 것을 확인하였다.

Corona generated Radio Interference of the 750 kV AC Bundle Conductors in Sandy and Dusty Weather Condition in the High Altitude Area

  • Liu, Yun-Peng;Zhu, Lei;Lv, Fang-Cheng;Wan, Bao-Quan;Pei, Chun-Ming
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권5호
    • /
    • pp.1704-1711
    • /
    • 2014
  • Sandy and dusty weather condition often occurs in the high altitude areas of China, which may greatly influence the corona generated radio interference (RI) characteristics of the bundle conductors of 750 kV AC power transmission lines. Corona generated RI of the conductors of the 750 kV AC power transmission lines used in practice is measured by EMI receiver with a coupling circuit and a coupling capacitor connected between the high voltage side and the earth side in fine and sandy and dusty condition. The measuring frequency is 0.5 MHz, and the quasi-peak detection is used. RI excitation function is calculated based on the corona RI current measured by the EMI receiver. Corona generated RI characteristics were analyzed from sand concentration and sand particle size. The test result shows that the corona generated RI excitation function is influenced by the sandy and dusty condition. Corona discharge of the conductors is more serious in sandy and dusty condition with an ultraviolet (UV) detector. Corona generated RI excitation function increases with the increase of sand concentration and also increases with the increase of particle size.