• 해양환경안전학회지
• /
• 제17권2호
• /
• pp.161-166
• /
• 2011

본 연구에서는 태양전지로 구동되는 전기추진 소형선박을 제안하여 선체의 설계 및 모형선 시험을 행하였다. 선체 모양은 배의 안정성 및 태양과의 수광면적을 고려하여 차타마란형으로 제작하였다. 계산에 의하면 설계 선박의 선속을 5 knots로 할 때 1.1마력으로 충분한 추력이 산출되었으나 실제의 선속은 태양에너지 등 기후조건에 의해 산출된 값보다 약간 낮았다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2003년도 춘계공동학술대회논문집
• /
• pp.16-20
• /
• 2003

최근 어선어업 주변환경의 급속한 변화는 기존 어선어업의 구조조정과 새로운 사회, 경제적 환경에 부응하는 선형개발의 요구로 이어지고 있다. 한편, 서ㆍ남해 연안에서 작업 및 항해하는 연안어선들은 노출된 프로펠러에 어망, 로프 등이 감기는 사고가 매년 증가하고 있는 실정이다. 본 연구는 이상과 같은 관점에서 연안어선의 해난사고 방지를 위해 기존 선미형상을 수정한 프로펠러 보호터널 부착 연안어선을 대상으로 모형시험을 통하여 세미워터제트형 연안어선의 주요성능을 분석, 검토한 것이다.

• 해양환경안전학회지
• /
• 제25권4호
• /
• pp.504-510
• /
• 2019

본 연구에서는 동력수상레저기구 조종면허의 기존 수기채점방식을 전자채점방식으로 전환할 수 있도록 실기시험항목을 분석하여 현재의 실기시험 시스템의 개념을 해치지 않는 범위 내에서 디지털화할 수 있는 방안을 모색하고, LiDAR센서와 WAVE통신을 통한 전자채점 시스템을 개발했다. 연구를 통해 얻은 결과는 다음과 같다. 첫째, 시험선에서는 LiDAR 및 시험관 평가입력장치를 통해 입력된 채점 데이터가 통합처리장치에서 WAVE통신을 통해 육상 관제센터로 전송되어 응시자의 데이터를 저장/관리할 수 있는 시스템을 구축 및 검증했다. 둘째, 사행 과제를 평가함에 있어서 기존에 목시관측 또는 막대기를 사용한 것을 대신하여 LiDAR를 이용함으로써 정확한 거리측정이 가능해졌고, 정확한 거리정보를 시험선 통합처리장치를 통해 시험관 평가입력장치에 신속하게 표출했다. 셋째, 시험선에서 취득한 평가점수 데이터를 육상 관제센터로 유실없이 고속으로 전송하기 위해 활용한 WAVE통신에서 원활한 전송 및 처리가 가능함을 확인했다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2019년도 춘계학술대회
• /
• pp.98-100
• /
• 2019

In the past, there were several researchers investigating waves generated by a small boat. Wave generated by a ship can be divided into two distinct systems of waves, such as transverse and diverging waves. It is necessary to understand the behavior of a ship in waves generated by a small boat near port in the view point of ship safety. In this study, the motion of moored floater in waves generated by a small boat near port is investigated. The model test is performed in waves in a square tank in Changwon National University (CWNU). IMU and optical-based system which uses the technique of recording and capturing attitude with respect time are used for measuring 6DOF motion of the moored floater. In addition, tension gauges are used to measure the tension of mooring lines. The effect of waves generated by a small boat on motion of the moored floater near port is investigated through performing the model test in various wave directions of virtually but reasonably assumed wave scenarios.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.60-63
• /
• 2003

Resistance performance of 3 G/T class coastal leisure boat is experimentally investigated at high speed ranges and the effect of a fin attached at hull side is studied together. Wave patterns are observed to make clear the relation between the resistance performances and the wave characteristics.

• 한국해양공학회지
• /
• 제18권3호
• /
• pp.44-49
• /
• 2004

Initial hull form of 10 G/T and 40 knots class coastal patrol boat is newly developed. The resistance performances are experimentally and numerically investigated by model test and CFD technique. The effect of initial trim and a fin attached at hull side are studied together. Wave patterns are observed to make clear the relation between the performance and the wave characteristics. It can be found that the initial trim plays a role in increasing the resistance performance above a certain velocity, and the CFD technique can be used at the initial design stage of a high-speed planning boats.

• 한국해양공학회지
• /
• 제26권6호
• /
• pp.14-18
• /
• 2012

A 30ft class aluminum leisure boat is newly developed and the resistance performances are investigated by a model test at a high-speed circulating water channel. The effect of a fin attached to the side of the hull is studied at two different displacements. Wave patterns are observed to make clear the relationship between the resistance performance and wave characteristics. It can be found that a chine position at the draft line can have a strong effect on the resistance performance around a certain velocity range.

• 대한조선학회지
• /
• 제8권1호
• /
• pp.103-118
• /
• 1971

Ferro-cement is a composite material made of portland cement mortar and wire(or chicken wire) reinforcement. In most cases, as a shipbuilding material, reinforcing steel rods and steel pipes are also used. This report will review the technique of ferro-cement boat building and will guide the working details. Beyond these, this report will present some test results of the ferro-cement test pannels and will compare those with the other well known shipbuilding material. As a matter of fact ferro-cement application to the shipbuilding material is quite not a new theory. There were already lots of case studies and actual ship building applications. But the technique to do this is not easily available to the interested persons and amateur shipbuilders. Therefore this report will stress most its "state-of-the-art review" and give kind guidance in using ferro-cement as a shipbuilding material. For the more interested research worker, technical references as much as listable are printed in the bibliography section on this report.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.63-69
• /
• 2011

Hull forms for catamaran type small fishing boat powered by electric motor are newly developed by experimental approaches. Model tests for two hull forms having different length are made at circulating water channel. Resistance performance and wave patterns are compared to carry out an analysis of the effect of extension of main body. The results show that the extension of main body can give better resistance performance above a certain velocity.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.213-215
• /
• 2004

Water jet propulsion system has high efficiency on middle to high speed, and it provides better safety than conventional screw propeller because it has not projected propeller and rudder. So many leisure boat and high-speed ferries use this propulsion system. We developed water-jet propulsion unit for small planning boat, and launched that in the boat, after that we tested water-jet unit in the lake. As a result, we certify heat dissipation at the bearing housing and reverse duct's shape for neutral position are important at the design, and alignment water-jet unit and keel line are important at the launching, and ship's resistance performance and jet's propulsion performance also are needed to consideration.