• Bulletin of the Korean Chemical Society
• /
• v.23 no.1
• /
• pp.59-64
• /
• 2002

A facile and precise batch oxidation reaction system allows continuous monitoring of the oxidation rate and cumulated oxygen conversion of xylenes, and the side reactions to carbon monoxide and carbon dioxide may also be studied. The oxidation reaction can be analyzed precisely with the rate and amount of oxygen consumed. The reaction reveals that 4-carboxybenzaldehyde is an unstable intermediate of p-xylene oxidation as the reaction proceeds instantaneously from p-toluic acid to TPA (terephthalic acid). The alkali metals accelerate oxidation, even though they retard the reaction initially. The oxidation rate increases with decreasing water concentration. However, in the later part of reaction, the reactivity decreases a bit if the water concentration is very low. This retarding effect of water can be overcome partly by the addition of potassium. The oxidation of o-xylene, compared with the oxidation of p-xylene and m-xylene, proceeds quite fast initially, however, the oxidation rate of xylene isomers in the later stage of reaction is in the order of p-xylene > mxylene > o-xylene.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.351-354
• /
• 2001

Poly(ethylene terephthalate) (PET)는 물리적, 기계적 성질이 우수한 엔지니어링 플라스틱의 하나로 섬유, 필름, 및 여러 가지 용도로 다양하게 사용되고 있다. PET는 DMT(dimethyl terephthalate) 또는 TPA(terephthalic acid)와 EG(ethylene glycol)를 축합 중합하여 제조한다. (중략)

• Bulletin of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.1041-1042
• /
• 2010

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.152-152
• /
• 2021

• Polymer(Korea)
• /
• v.35 no.2
• /
• pp.176-182
• /
• 2011

Liquid crystalline aromatic polyesters (LCPs) are representative examples of thermotropic liquid crystalline polymers, whose structure-property relationships have been the subject of many researches. In this study, we synthesized organo-soluble liquid crystalline aromatic polyesters, and their composites with acetylene-terminated thermoset resins were prepared and characterized. Soluble LCPs were synthesized by employing 6-hydroxy-2-naphthoic acid, terephthalic acid, isophthalic acid, and 4-aminophenol as monomers via condensation polymerization based on transesterfication and transamidation. Acetylene-terminated thermoset resins were synthesized by the reaction of 4-ethynylaniline with terephthaloyl dichloride, isophthaloyl dichloride or 4,4'-biphenyldicarbonyl dichloride. We prepared the soluble LCP/thermoset composites by solution blending followed by thermal treatment. The thermal stability, thermal expansion coefficient, and dielectric properties of the composite were studied.

• Journal of Environmental Health Sciences
• /
• v.23 no.3
• /
• pp.85-90
• /
• 1997

The objective of this study was to investigate biodegradation of TPA(terephthalic acid) and EG (ethylene glycol), treatment efficiency of polyester weight loss wastewater and microbial characteristics by aerated submerged biolfilm(ASB) p.rocess. In a batch reactor, pH increased from 7.0 to 8. 5 in the biodegradation of TPA. Whereas, in case of EG, decreased from 7.0 to 5.2. COD concentration rapidly decreased within 24hr in the biodegradation of TPA and EG. COD removal velocity constant(k) were 0.065-0.088 hr$^{-1}$. The biodegradation velocity of TPA was 1.4 times faster than that of EG. The ratio of suspended biomass to the total biomass in the reactor was 18.3-33.3%, increased as a high ratio of EG content. Biofilm thickness, biofilm dry density and attached biomass were 346-432 $\mu$m, 41.8-61.9 mg/cm$^3$, 1.45-2.67 mg/cm$^2$, respectively. There values increased as a high ratio of TPA content. In the hydraulic retention time of 36 hr, organic loading rate of 4 kgCOD/m$^3\cdot$ day and packing ratio of 70%, the effluent concentrations of TCOD, SCOD in a continuous flow reator were 1,388 mg/l, 147 mg/l and removal efficiencies were 77%, 97.6%, respectively.

• Journal of Korean Society on Water Environment
• /
• v.20 no.5
• /
• pp.452-456
• /
• 2004

Gamma-rays effectively decomposed TPA and EG, thus removal of $1.0{\times}10^{-3}$ M pollutants was near 65 and 95%, respectively, at an absorbed dose of 10 kGy. However, TOC removal in the radiation treatment was less than 5% due to a low transformation of both TPA and EG to $CO_2$. For TPA, gamma-ray treatment largely reduced biodegradability($BOD_5/COD$) by degrading TPA to non-biodegradable organic acids. This implies that the change of biodegradability should be considered when the radiation treatment is combined with conventional biological techniques. A weight-loss wastewater containing TPA and EG was also purified by gamma-ray treatment. Extraordinarily, biodegradability of the wastewater was increased at a low dose of 1 kGy. Though underlying mechanism was not clearly identified, this result stresses the effect of wastewater composition and absorbed dose on the biodegradability change.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.208-217
• /
• 2001

PET/BPA copolymer of terephthalic acid, bisphenol-A and ethylene glycol was melt-pressed and quenched in ice water. This copolymer film was drawn by capillary rheometer. Shrinkage, crystallinity, morphology, thermal, dynamic mechanical, and mechanical properties of these copolymer films were investigated. The PET/BPA copolymer film exhibited T$_{m}$ lower than that of PET film. The crystallinity and density of these drawn copolymer films increased with draw ratio and draw rate but decreased with draw temperature. The tensile strength and tensile modulus of the copolymer films increased with draw ratio but decreased with draw temperature. Shrinkage of the drawn copolymer film decreased with draw ratio and draw rate.e.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.287-292
• /
• 2015

Characterization of a series of bio-based terpolymers containing various amounts of ethylene glycol, 1,4-cyclohexylene dimethanol, and isosorbide units were studied by $^1H$ NMR and $^{13}C$ NMR. The NMR results revealed that they had all random microstructures and that their sequence distribution was affected by the content of isosorbide. From DSC data for the terpolymer series investigated, it was observed that the glass transition temperature increased mainly as the content of isosorbide increased. The glass transition temperatures of terpolymers were estimated from the composition by extended Fox equation.

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.322-327
• /
• 2023

A design of experiments was evaluated in optimizing MOF-5 synthesis for acetylene adsorption. At first, mixture design was used to optimize precursor concentration, terephthalic acid, zinc acetate dihydrate and N,N-dimethylformamide. More specifically, 13 conditions with various molar ratios were designed by extreme vertices design method. After preparing the samples, XRD, N₂ physisorption and SEM analysis were performed for their characterization. Moreover, acetylene adsorption experiments were carried out over the samples under identical conditions. The optimal precursor composition for MOF-5 synthesis was predicted on a molar basis as follows: terephthalic acid : acetate dihydrate : dimethylformamide = 0.1 : 0.4 : 0.5. Thereafter, multi-level factorial design was designated to investigate the effect of synthesis reaction conditions such as temperature, time and stirring speed. By the statistical analysis of 18 samples designed, 4 reaction parameters were determined for additional adsorption experiments. Therefore, MOF-5 prepared under the synthesis time and temperature of 100 ℃ and 12 h, respectively, showed the maximum adsorption capacity of 15.1 mmol/g.