• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.133-138
• /
• 2008

This study proposes a novel method for in-service evaluation of force in an external prestressing 7-wire tendon which is employed for retrofitting bridge superstructure. For this propose, a smart strand 7.0m long whose king wire is replaced by a steel tube and the FBG sensor, is developed. Performance of the strand is demonstrated through loading-unloading tests for a RC T-shaped beam 6.4m long. Finally, a couple of test results are presented to discuss effect of temperature change in the FBG sensor.

• Journal of the Korean Society of Safety
• /
• v.23 no.2
• /
• pp.21-29
• /
• 2008

To evaluate the structural integrity of the NPP containment building more rigorously, the effective prestress, which is one of the most affecting elements, needs to be estimated exactly. This paper presents the results of an experimental study to determine the effective prestress force in prestressed concrete beams. It is possible to improve the effective prestress measuring method by test beam, which is being applied for the investigation of the nuclear power plant in operation. If experimentally evaluated Lift-Off method in this study can be coupled with test beam test currently being used in in-service nuclear power plant, it is possible to measure prestress loss of the tendon and the level of the effective prestress load.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.1
• /
• pp.227-238
• /
• 2003

Due to deterioration of bridge, usually be using the external prestressing method among repair reinforcement method. But, there is much to be desired about a detailed account, almost it has analysed by cambers of girders, deflections of middle span and upper, bottom stresses of girders. Also, it is not examined closely that effect of internal prestress by external prestressing. The purpose of this study is confirmed the effect of internal tendons by external prestressing, estimation of additional external prestressing force and look for exact external prestressing force.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.240-245
• /
• 2005

There has been a strong demand on more economic and lower depth girder bridges for short and medium span range, PRECOM, which is a new type steel-concrete composite girder, has been developed to realize a more economic bridge system with a lower depth girder. In the PRECOM girder bridge, a steel plate girder is simply supported and then concrete form is hung to girder. Thus, the self-weight of the concrete is loaded to the steel girder. To increase the resistance of concrete in the lower casing against tensile stress, compressive force is introduced by prestressed tendon To evaluate the manufacturability and performances of the completed bridge, four 15-m girders and a bridge specimen with two 20m girders wvere constructed. The camber during the construction and introduction of an appropriate compressive force was evaluated. Dynamic data were obtained through the modal testing of the completed girders. Static loading test was also conducted to examine cracks and evaluate the decrease in stiffness and failure behavior under extreme conditions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.4
• /
• pp.147-153
• /
• 2001

The major objectives of this study are to investigate experimental and analytical behavior of composite steel plate strengthened by external post prestressing method and to study the increasing magnitude of load carrying capacity by the external post prestressing method. With installed strain gauges and LVDT, the change of structural behaviors according to the amount of prestressing force is measured and the effects of shear strengthening according to the degree of angle in tendon are studied. The analytical structural behavior according to the amount of prestressing force is also investigated using finite element method. The effectiveness of strengthening of external post prestressing method is proved and an efficient FEM model is suggested by comparing the test results and analyzing results.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.1
• /
• pp.13-21
• /
• 2003

The purpose of this study is (a) to estimate effective moment arms of quadriceps forces and (b) to compare the $d_e$ between the ACL-reconstructed and uninjured knees from the same individual. One female (20 yrs old, 2 yrs post-op, hamstring tendon autograft) and two males (22 yrs old, 2 yrs post-op; 28 yrs old, 4 yrs post-op; Patellar tendon autografts for both). Sagittal view radiographs were obtained for 6-7 different angles $(range\;5^{\circ}-110^{\circ})$ from each knee. The do was determined by the method of Chow et al. (1999a). The results showed that the maximum de values ranged from 4.61 to 5.59cm and 4.59 to 4.89cm for the ACL-reconstructed and uninjured knees, respectively. The maximum $d_e$ occurred between $35^{\circ}\;and\;50^{\circ}\;and\;20^{\circ}\;and\;50^{\circ}$ for the ACL-reconstructed and uninjured knees, respectively. The minimum do values ranged from 4.12 to 4.35 cm and 3.12 to 3.63cm for the ACL-reconstructed and uninjured knees, respectively. The effective moment arm of the knee extensor affects the loads on knee ligaments during knee-extension exercises. Because apparent differences in the moment arm of the quadriceps in different participants, it is very important to use personalized knee joint geometry for the computation of knee joint force. In the present study, no noticeable bilateral difference was found in the male subjects. However, apparent bilateral differences in de were observed in the female subject. This suggests that the effects of ACL reconstruction surgery on patellar mechanism deserve further investigation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.3
• /
• pp.8-15
• /
• 2018

An experiment was carried out to evaluate the lateral torsional stability of a girder with respect to the location and magnitude of prestressing force. The test of evaluating the lateral displacement and stability of a girder could cause an unexpected result due to various parameters, such as material nonlinearity, initial geometric imperfections, prestressing force, and loading and support conditions. Therefore, a small model testing was programmed to control the various parameters and assess the lateral torsional stability with respect to the prestressing force. This study proposed and fabricated an experimental apparatus that can satisfy the loading and in-plane and out-of-plane support conditions and also contol the prestressing force. The result of the experiment showed that the lateral torsional stability increased when the prestressing force was applied in the bottom flange of the girder. As a result, this study proposed an analytical equation that can account for the effect of the prestressing force in the lateral torsional stability of a girder.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.5
• /
• pp.171-182
• /
• 1994

Recently, several prestressed concrete box girder bridges have experienced severe cracking along the tendon path when prestress force has been transferred to the anchorage zone. The purpose of the present study is therefore to explore characteristics of the local stress distribution, to study the effects of section geometry of anchorage zones, i.e., tendon inclination, tendon eccentricity and concrett. cover thickness anti to develop recornrncnd;itions for specific design criteria for post~tensioned a:lchorage zones. 7'0 accomplish these objectives, a cc~mprehen sive nonlinar finite element study has been conducted. From this study, realistic forrnulas for crackinq and ultimate load capacities are proposed. 'These equations reasonably well predict the crackinq and ultimate loads of prestressed concrete anchorage zones.

• Clinics in Shoulder and Elbow
• /
• v.13 no.1
• /
• pp.161-166
• /
• 2010

Purpose: Irreparable massive rotator cuff tears pose a distinct clinical challenge for the orthopaedist and non-surgical treatment has had inconsistent results and proven unsuccessful for chronic symptoms, while surgery, including debridement and partial and complete repairs have had varying degrees of success. Materials and Methods: For rotator cuff tears that are deemed irreparable, treatment options are limited. Results and Conclusion: The use of tendon transfers (latissimus dorsi for posterosuperior type cuff defects and pectoralis major for subscapularis defects) in younger patients to reconstruct rotator cuffs and re-establish function and restore shoulder kinematics can be useful in solving this difficult problem.

• Advances in biomechanics and applications
• /
• v.1 no.3
• /
• pp.169-185
• /
• 2014

Computational multibody models of the elbow can provide a versatile tool to study joint mechanics, cartilage loading, ligament function and the effects of joint trauma and orthopaedic repair. An efficiently developed computational model can assist surgeons and other investigators in the design and evaluation of treatments for elbow injuries, and contribute to improvements in patient care. The purpose of this study was to develop an anatomically correct elbow joint model and validate the model against experimental data. The elbow model was constrained by multiple bundles of non-linear ligaments, three-dimensional deformable contacts between articulating geometries, and applied external loads. The developed anatomical computational models of the joint can then be incorporated into neuro-musculoskeletal models within a multibody framework. In the approach presented here, volume images of two cadaver elbows were generated by computed tomography (CT) and one elbow by magnetic resonance imaging (MRI) to construct the three-dimensional bone geometries for the model. The ligaments and triceps tendon were represented with non-linear spring-damper elements as a function of stiffness, ligament length and ligament zero-load length. Articular cartilage was represented as uniform thickness solids that allowed prediction of compliant contact forces. As a final step, the subject specific model was validated by comparing predicted kinematics and triceps tendon forces to experimentally obtained data of the identically loaded cadaver elbow. The maximum root mean square (RMS) error between the predicted and measured kinematics during the complete testing cycle was 4.9 mm medial-lateral translational of the radius relative to the humerus (for Specimen 2 in this study) and 5.30 internal-external rotation of the radius relative to the humerus (for Specimen 3 in this study). The maximum RMS error for triceps tendon force was 7.6 N (for Specimen 3).