• MALSORI
• /
• no.53
• /
• pp.93-102
• /
• 2005

The performance of a speech recognition system is generally degraded in telephone environment because of distortions caused by background noise and various channel characteristics. In this paper, data-driven temporal filters are investigated to improve the performance of a specific recognition task such as telephone speech. Three different temporal filtering methods are presented with recognition results for Korean connected-digit telephone speech. Filter coefficients are derived from the cepstral domain feature vectors using the principal component analysis. According to experimental results, the proposed temporal filtering method has shown slightly better performance than the previous ones.

• Korean Journal of Remote Sensing
• /
• v.19 no.5
• /
• pp.381-392
• /
• 2003

Multi-temporal approaches using sequential data acquired over multiple years are essential for satisfactory discrimination between many land-cover classes whose signatures exhibit seasonal trends. At any particular time, the response of several classes may be indistinguishable. A harmonic model that can represent seasonal variability is characterized by four components: mean level, frequency, phase and amplitude. The trigonometric components of the harmonic function inherently contain temporal information about changes in land-cover characteristics. Using the estimates which are obtained from sequential images through spectral analysis, seasonal periodicity can be incorporates into multi-temporal classification. The Normalized Difference Vegetation Index (NDVI) was computed for one week composites of the Advanced Very High Resolution Radiometer (AVHRR) imagery over the Korean peninsula for 1996 ～ 2000 using a dynamic technique. Land-cover types were then classified both with the estimated harmonic components using an unsupervised classification approach based on a hierarchical clustering algorithm. The results of the classification using the harmonic components show that the new approach is potentially very effective for identifying land-cover types by the analysis of its multi-temporal behavior.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.2
• /
• pp.81-90
• /
• 2017

This study aimed to construct an integrated database using the same spatio-temporal unit by employing various public-data types with different real-time information provision cycles and spatial units. Towards this end, three temporal interpolation methods (piecewise constant interpolation, linear interpolation, nonlinear interpolation) and a spatial matching method by district boundaries was proposed. The case study revealed that the linear interpolation is an excellent method, and the spatial matching method also showed good results. It is hoped that various prediction models and data analysis methods will be developed in the future using different types of data in the analysis database.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.885-901
• /
• 2021

This paper illustratesthe impact of the temporal gap between satellite images and targetsize in mesoscale atmospheric motion vector (AMV) algorithm. A test has been performed using GEO-KOMPSAT-2A (GK2A) rapid-scan data sets with a temporal gap varying between 2 and 10 minutes and a targetsize between 8×8 and 40×40. Resultsshow the variation of the number of AMVs produced, mean AMV speed, and validation scores as a function of temporal gap and target size. As a results, it was confirmed that the change in the number of vectors and the normalized root-mean squared vector difference (NRMSVD) became more pronounced when smaller targets are used. In addition, it was advantageous to use shorter temporal gap and smaller target size for the AMV calculation in the lower layer, where the average speed is low and the spatio-temporal scale of atmospheric phenomena is small. The temporal gap and the targetsize are closely related to the spatial and temporalscale of the atmospheric circulation to be observed with AMVs. Thus, selecting the target size and temporal gap for an optimum calculation of AMVsrequires considering them. This paper recommendsthat the optimized configuration to be used operationally for the near-real time analysis of mesoscale meteorological phenomena is 4-min temporal gap and 16×16 pixel target size, respectively.

• ETRI Journal
• /
• v.31 no.1
• /
• pp.1-9
• /
• 2009

Frequency domain analysis is a fundamental procedure for understanding the characteristics of visual data. Several studies have been conducted with 2D videos, but analysis of stereoscopic 3D videos is rarely carried out. In this paper, we derive the Fourier transform of a simplified 3D video signal and analyze how a 3D video is influenced by disparity and motion in terms of temporal aliasing. It is already known that object motion affects temporal frequency characteristics of a time-varying image sequence. In our analysis, we show that a 3D video is influenced not only by motion but also by disparity. Based on this conclusion, we present a temporal anti-aliasing filter for a 3D video. Since the human process of depth perception mainly determines the quality of a reproduced 3D image, 2D image processing techniques are not directly applicable to 3D images. The analysis presented in this paper will be useful for reducing undesirable visual artifacts in 3D video as well as for assisting the development of relevant technologies.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.11
• /
• pp.5011-5017
• /
• 2016

Background: Cervical cancer is a major public health problem worldwide. There have been several studies indicating that risk is associated with geographic location and that the incidence of cervical cancer has changed over time. In Thailand, incidence rates have also been found to be different in each region. Methods: Participants were women living or having lived in upper Northern Thailand and subjected to cervical screening at Maharaj Nakorn Chiang Mai Hospital between January 2010 and December 2014. Generalized additive models with Loess smooth curve fitting were applied to estimate the risk of cervical cancer. For the spatial analysis, Google Maps were employed to find the geographical locations of the participants' addresses. The Quantum Geographic Information System was used to make a map of cervical cancer risk. Two univariate smooths: x equal to the residency duration was used in the temporal analysis of residency duration, and x equal to the calendar year that participants moved to upper Northern Thailand or birth year for participants already living there, were used in the temporal analysis of the earliest year. The spatial-temporal analysis was conducted in the same way as the spatial analysis except that the data were split into overlapping calendar years. Results: In the spatial analysis, the risk of cervical cancer was shown to be highest in the Eastern sector of upper Northern Thailand (p-value <0.001). In the temporal analysis of residency duration, the risk was shown to be steadily increasing (p-value =0.008), and in the temporal analysis of the earliest year, the risk was observed to be steadily decreasing (p-value=0.016). In the spatial-temporal analysis, the risk was stably higher in Chiang Rai and Nan provinces compared to Chiang Mai province. According to the display movement over time, the odds of developing cervical cancer declined in all provinces. Conclusions: The risk of cervical cancer has decreased over time but, in some areas, there is a higher risk than in the major province of Chiang Mai. Therefore, we should promote cervical cancer screening coverage in all areas, especially where access is difficult and/or to women of lower socioeconomic status.

• PNF and Movement
• /
• v.18 no.2
• /
• pp.287-296
• /
• 2020

Purpose: The study aims were to develop a wearable inertial sensor-based gait analysis device that uses machine learning algorithms, and to validate this novel device using temporal gait parameters. Methods: Thirty-four healthy young participants (22 male, 12 female, aged 25.76 years) with no musculoskeletal disorders were asked to walk at three different speeds. As they walked, data were simultaneously collected by a motion capture system and inertial measurement units (Reseed®). The data were sent to a machine learning algorithm adapted to the wearable inertial sensor-based gait analysis device. The validity of the newly developed instrument was assessed by comparing it to data from the motion capture system. Results: At normal speeds, intra-class correlation coefficients (ICC) for the temporal gait parameters were excellent (ICC [2, 1], 0.99~0.99), and coefficient of variation (CV) error values were insignificant for all gait parameters (0.31~1.08%). At slow speeds, ICCs for the temporal gait parameters were excellent (ICC [2, 1], 0.98~0.99), and CV error values were very small for all gait parameters (0.33~1.24%). At the fastest speeds, ICCs for temporal gait parameters were excellent (ICC [2, 1], 0.86~0.99) but less impressive than for the other speeds. CV error values were small for all gait parameters (0.17~5.58%). Conclusion: These results confirm that both the wearable inertial sensor-based gait analysis device and the machine learning algorithms have strong concurrent validity for temporal variables. On that basis, this novel wearable device is likely to prove useful for establishing temporal gait parameters while assessing gait.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.3
• /
• pp.99-108
• /
• 2020

PURPOSE: This study examined the effects of the confusion level in performing dual tasks using smartphones while walking in subjects with chronic ankle instability (CAI). METHODS: Twenty subjects with CAI and 20 healthy subjects participated in the study. The spatial, temporal, spatial-temporal, and variability gait parameters were measured using GAITRite under four different conditions: general gait, web surfing during gait, texting during gait, and gaming during gait. Two-way repeated-measures analysis of variance was used to analyze the interaction according to the group (2) and confusion level in dual-tasks (4). One-way repeated-measures analysis of variance was used to compare the changes within the group according to the confusion level in dual-tasks. The changes between groups were compared using an independent t-test. The statistical significance level was set to p = .05. RESULTS: Significant interactions in the temporal and spatial-temporal gait parameters were found between the dual-task conditions and the other groups (p < .05). Significant within-group differences in the spatial, temporal, and spatial-temporal gait parameters were found according to the confusion level in dual tasks (p < .05). Significant between-group differences were observed in the temporal and spatial-temporal gait parameters according to the confusion level in dual tasks (p < .05). CONCLUSION: The effect of the confusion level in dual tasks was greater in subjects with CAI than in healthy individuals. This study suggests that to prevent reinjury to the ankle, subjects with CAI should avoid dual tasks such as using smartphones while walking.

• Communications for Statistical Applications and Methods
• /
• v.30 no.2
• /
• pp.119-133
• /
• 2023

With the rapid growth of the economy and fossil fuel consumption, the concentration of air pollutants has increased significantly and the air pollution problem is no longer limited to small areas. We conduct statistical analysis with the actual data related to air quality that covers the entire of South Korea using R and Python. Some factors such as SO₂, CO, O₃, NO₂, PM₁₀, precipitation, wind speed, wind direction, vapor pressure, local pressure, sea level pressure, temperature, humidity, and others are used as covariates. The main goal of this paper is to predict air quality index (AQI) spatio-temporal data. The observations of spatio-temporal big datasets like AQI data are correlated both spatially and temporally, and computation of the prediction or forecasting with dependence structure is often infeasible. As such, the likelihood function based on the spatio-temporal model may be complicated and some special modelings are useful for statistically reliable predictions. In this paper, we propose several methods for this big spatio-temporal AQI data. First, random effects with spatio-temporal basis functions model, a classical statistical analysis, is proposed. Next, neural networks model, a deep learning method based on artificial neural networks, is applied. Finally, random forest model, a machine learning method that is closer to computational science, will be introduced. Then we compare the forecasting performance of each other in terms of predictive diagnostics. As a result of the analysis, all three methods predicted the normal level of PM_2.5 well, but the performance seems to be poor at the extreme value.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10b
• /
• pp.250-252
• /
• 2004

In this paper we apply several variations of independent component analysis( ICA) methods, such as spatial ICA (sICA), temporal ICA (tICA), and spatiotemporal ICA (stICA), to yeast cell cycle datasets, and compare their performance in finding components that result in gene clusters coherent with annotations and in extract ins meaningful temporal modes. It turns out that the results of tICA are superior to those of PCA, sICA, and stICA in terms of gene clustering and the temporal modes extracted by stICA highlights particular cellular processes.