• 제목/요약/키워드: temperature-dependent yield stress

검색결과 48건 처리시간 0.029초

저온처리한 오이의 자엽에서 광합성 활성의 광의존성 저해 (Light-Dependent Chilling Injury on the Photosynthetic Activities of Cucumber Cotyledons)

  • 김현식
    • Journal of Plant Biology
    • /
    • 제36권2호
    • /
    • pp.133-140
    • /
    • 1993
  • The photosynthetic activities in relation to oxygen evolution rates, quantum yield, CO2 uptake rates and room temperature chlorophyll fluorescence were investigated in cotyledons of cucumber seedlings exposed to low temperature (at 4$^{\circ}C$) for 24 h. Light-chilling caused more inhibition on light-saturated maximum oxygen evolution rates, quantum yield, and CO2 uptake rates than dark-chilling did in the cucumber plant. Light-chilling induced more marked increase in Fo and decrease in (Fv)m/Fm than dark-chilling did in the room temperature chlorophyll induction kinetics. The above results affected by chilling in the light are considered to be associated with the partial damage of the reaction center of PS II and the decreased photosynthetic activities. There occurred a large decrease in qQ with little change in qNP in the light-chilling plant. When light- and dark-chilled plants were recovered at room temperature for 24 h and their chlorophyll fluorescences were induced with light doubling technique, light-chilled plants showed more smaller magnitude and rate of fluorescence relaxation than dark-chilled plants. These suggest that light-chilling might cause some alterations in transthylakoid pH formation, and that photosynthetic apparatus of cucumber cotyledons is more susceptible to light-chilling. In the fast fluorescence induction kinetics, FR was decreased by 60% in the light-chilled plants with reference to $25^{\circ}C$ light-grown plants, while the dark-chilled plants showed a decreased rate of only 20% with reference to $25^{\circ}C$ dark-treated plants for 24 h, indicating that cucumber seedling is very sensitive to chilling stress. So, it is certain that chilling injury to the photosynthetic apparatus is strongly dependent on the presence of light in cucumber seedlings.

  • PDF

열수 추출 미역액의 정상유동특성에 관한 연구 (Studies on the Steady Shear Flow Properties of Sea Mustard Aqueous Extracts)

  • 최희숙;오성훈
    • 한국식품영양학회지
    • /
    • 제13권1호
    • /
    • pp.78-82
    • /
    • 2000
  • For the purpose of investigation of the food processing fittness of the sea mustard aqueous extracts, the steady shear flow have been measured over a wide range of shear rate using a Brookfield digital viscometer(SPDL21). The rheological behaviors of the sea mustard aqueous extracts which were extracted at 10$0^{\circ}C$ for 2 hours exhibited pseudoplastic behavior with yield stress. In the test of the relationship between temperature and apparent viscosity of samples at 10 rpm decreased along with the increment of temperature. The sea mustard aqueous extracts appeared greatly temperature dependent characteristics(Ea=1.51 ㎉/mole).

  • PDF

변형률 속도에 따른 Fe-24.5Mn-4Cr-0.45C 합금의 인장 특성과 동적 변형시효 (Influence of Strain Rate on Tensile Properties and Dynamic Strain Aging of an Fe-24.5Mn-4Cr-0.45C Alloy)

  • 이승용;황병철
    • 한국재료학회지
    • /
    • 제26권5호
    • /
    • pp.281-286
    • /
    • 2016
  • In the present study, the tensile properties and dynamic strain aging of an Fe-24.5Mn-4Cr-0.45C alloy were investigated in terms of strain rate. During tensile testing at room temperature, all the stress-strain curves exhibited serrated plastic flows related to dynamic strain aging, regardless of the strain rate. Serration appeared right after yield stress at lower strain rates, while it was hardly observed at high strain rates. On the other hand, strain-rate sensitivity, indicating a general relationship between flow stress and strain rate at constant strain and temperature, changed from positive to negative as the strain increased. The negative strain-rate sensitivity can be explained by the Portevin Le Chatelier effect, which is associated with dynamic strain aging and is dependent on the strain rate because it is very likely that the dynamic strain aging phenomenon in high-manganese steels is involved in the interaction between moving dislocations and point-defect complexes.

Hygrothermal Fracture Analysis in Dissimilar Materials

  • Ahn, Kook-Chan;Lee, Tae-Hwan;Bae, Kang-Yul
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제2권2호
    • /
    • pp.65-72
    • /
    • 2001
  • This paper demonstrates an explicit-implicit, finite element analysis for linear as well as nonlinear hygrothermal stress problems. Additional features, such as moisture diffusion equation, crack element and virtual crack extension(VCE) method for evaluating J-integral are implemented in this program. The Linear Elastic Fracture Mechanics(LEFM) Theory is employed to estimate the crack driving force under the transient condition for an existing crack. Pores in materials are assumed to be saturated with moisture in the liquid form at the room temperature, which may vaporize as the temperature increases. The vaporization effects on the crack driving force are also studied. The ideal gas equation is employed to estimate the thermodynamic pressure due to vaporization at each time step after solving basic nodal values. A set of field equations governing the time dependent response of porous media are derived from balance laws based on the mixture theory. Darcy's law is assumed for the fluid flow through the porous media. Perzyna's viscoplastic model incorporating the Von-Mises yield criterion are implemented. The Green-Naghdi stress rate is used for the invariant of stress tensor under superposed rigid body motion. Isotropic elements are used for the spatial discretization and an iterative scheme based on the full Newton-Raphson method is used for solving the nonlinear governing equations.

  • PDF

겔라틴화(化)된 감자 전분(澱粉)의 리올로지 특성(特性) (Rheological Properties of Gelatinized Potato Starch)

  • 장영일;장규섭;박영덕
    • 농업과학연구
    • /
    • 제18권1호
    • /
    • pp.41-48
    • /
    • 1991
  • 각(各) 조건별(條件別) 감자전분(澱粉) 호화액(湖化液)을 Brookfield 단원통(單圓筒) 회전점도계(回轉粘度計)로 실험(實驗)한 리올로지 특성(特性)을 살펴보면, 3-7%의 감자전분(澱粉) 호화액(湖化液)은 모두 강복응력(降伏應力)을 갖는 의가소성(擬可塑性) 유체(流體)로서 시간의존성(時間依存性) 구조붕괴(構造崩壞)를 나타내는 Thixotrophic 특성(特性)을 나타내었다. 여기서 점조도지수(粘租度指數)와 강복응력(降伏應力)은 농도(濃度)에 비례(比例)하였으나, 유동거동지수(流動擧動指數)는 각(各) 조건(條件)에서 일정(一定)한 관계(關係)를 보이지 않았다. 첨가제(添加製)인 인산염(燐酸鹽)을 첨가(添加)하였을 때 호화(湖化) 감자전분(澱粉)의 점조도지수(粘租度指數)와 강복응력(降伏應力)값은 크게 감소(減少)하였으나 유동거동지수(流動擧動指數)의 값은 약간 증가(增加) 하였다. 또한 4% 감자 전분(澱粉) 호화액(湖化液)에서 초기(初期) 및 평충상태(平衝狀態) 에서 활성화(活性化) 에너지를 측정(測定)한 값은 각각 1.52Kcal/g.mole과 1.27 Kcal/g.mole 이었다.

  • PDF

ER유체의 역학적 특성이 반능동 현가시스템에 미치는 영향 (Influence of Bingham Characteristics for ER Fluid on Semi-Active Suspension System)

  • 김옥삼;김일겸;조남철;박우철
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제28권3호
    • /
    • pp.434-440
    • /
    • 2004
  • The electro-rheological fluids for semi-active suspension system are a class of colloidal dispersion which exhibit large reversible changes in their rheological behavior when they are subjected to external electrical fields. This paper presents Bingham properties of ER fluids subjected to temperature variations. In addition, an appropriate size of the ER damper for a passenger car is proposed to investigate the effects of Bingham characteristics on the damping performance. The filed-dependent damping forces are evaluated according to the temperature variation and sedimentation ratio.

Small and Large Deformation Rheological Behaviors of Commercial Hot Pepper-Soybean Pastes

  • Choi, Su-Jin;Kang, Kyoung-Mo;Yoo, Byoung-Seung
    • Food Science and Biotechnology
    • /
    • 제15권6호
    • /
    • pp.871-876
    • /
    • 2006
  • Rheological behavior of commercial hot pepper-soybean paste (HPSP) was evaluated in small amplitude oscillatory and steady shear tests. Storage modulus (G'), loss modulus (G"), and complex viscosity (${\eta}^*$) as a function of angular frequency (${\omega}$), and shear stress (${\sigma}$) as a function of shear rate (${\gamma}$) data were obtained for 5 commercial HPSP samples. HPSP samples at $25^{\circ}C$ exhibited a non-Newtonian, shear-thinning flow behavior with high yield stresses and their flow behaviors were described by power law, Casson, and Herschel-Bulkley models. Time-dependent flow properties were also described by the Weltman, Hahn, and Figoni & Shoemaker models. Apparent viscosity over the temperature range of $5-35^{\circ}C$ obeyed the Arrhenius temperature relationship with activation energies (Ea) ranging 18.3-20.1 kJ/mol. Magnitudes of G' and G" increased with an increase in ${\omega}$, while ${\eta}^*$ decreased. G' values were higher than G" over the most of the frequency range (0.63-63 rad/sec), showing that they were frequency dependent. Steady shear viscosity and complex viscosity of the commercial HPSP did not fit the Cox-Merz rule.

폴리카보네이트(PC)의 가속 피로수명 시험을 위한 시간-온도 호환성 (Time-Temperature Superposition Behavior for Accelerated Fatigue Lifetime Testing of Polycarbonate(PC))

  • 김규호
    • 대한기계학회논문집A
    • /
    • 제30권8호
    • /
    • pp.976-984
    • /
    • 2006
  • Time-temperature superposition has been studied to determine the long-term fatigue life over millions of cycles for glassy polymers. π le superposition is supposed to make an accelerated lifetime testing (ALT) technique possible. Dog-bone shaped specimens made of carbon filled Polycarbonate (PC) were tested under fatigue, based on the stress-lifetime approach (S-N curve). Fatigue-induced localized yield-like deformation is considered as the defect leading to fatigue and its evolution behavior is characterized by a modified energy activation model in which temperature is considered as fatigue acceleration factor. This model allows the reduced time concept to account for effects of different temperature in short-term fatigue data to determine long-term fatigue life through the use of time-temperature superposition that is applicable under a low frequency and isothermal conditions. The experimental results validated that the proposed technique could be a possible method for accelerated lifetime testing (ALT) of time-dependent polymeric materials.

Temperature-dependent axial mechanical properties of Zircaloy-4 with various hydrogen amounts and hydride orientations

  • Bang, Shinhyo;Kim, Ho-a;Noh, Jae-soo;Kim, Donguk;Keum, Kyunghwan;Lee, Youho
    • Nuclear Engineering and Technology
    • /
    • 제54권5호
    • /
    • pp.1579-1587
    • /
    • 2022
  • The effects of hydride amount (20-850 wppm), orientation (circumferential and radial), and temperature (room temperature, 100 ℃, 200 ℃) on the axial mechanical properties of Zircaloy-4 cladding were comprehensively examined. The fraction of radial hydride fraction in the cladding was quantified using PROPHET, an in-house radial hydride fraction analysis code. Uniaxial tensile tests (UTTs) were conducted at various temperatures to obtain the axial mechanical properties. Hydride orientation has a limited effect on the axial mechanical behavior of hydrided Zircaloy-4 cladding. Ultimate tensile stress (UTS) and associated uniform elongation demonstrated limited sensitivity to hydride content under UTT. Statistical uncertainty of UTS was found small, supporting the deterministic approach for the load-failure analysis of hydrided Zircaloy-4 cladding. These properties notably decrease with increasing temperature in the tested range. The dependence of yield strength on hydrogen content differed from temperature to temperature. The ductility-related parameters, such as total elongation, strain energy density (SED), and offset strain decrease with increasing hydride contents. The abrupt loss of ductility in UTT was found at ~700 wppm. Demonstrating a strong correlation between total elongation and offset strain, SED can be used as a comprehensive measure of ductility of hydrided zirconium alloy.

Effects of Supplemental Levels of Saccharomyces cerevisiae Fermentation Product on Lactation Performance in Dairy Cows under Heat Stress

  • Zhu, W.;Zhang, B.X.;Yao, K.Y.;Yoon, I.;Chung, Y.H.;Wang, J.K.;Liu, J.X.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제29권6호
    • /
    • pp.801-806
    • /
    • 2016
  • The objectives of this study were to evaluate the effects of different supplemental levels of Saccharomyces cerevisiae fermentation product (SCFP; Original XP; Diamond V) on lactation performance in Holstein dairy cows under heat stress. Eighty-one multiparous Holstein dairy cows were divided into 27 blocks of 3 cows each based on milk yield ($23.6{\pm}0.20kg/d$), parity ($2.88{\pm}0.91$) and day in milk ($204{\pm}46d$). The cows were randomly assigned within blocks to one of three treatments: 0 (control), 120, or 240 g/d of SCFP mixed with 240, 120, or 0 g of corn meal, respectively. The experiment was carried out during the summer season of 2014, starting from 14 July 2014 and lasting for 9 weeks with the first week as adaption period. During the experimental period, average daily temperature-humidity index (measured at 08:00, 14:00, and 20:00) was above 68, indicating that cows were exposed to heat stress throughout the study. Rectal temperatures tended to decrease linearly (p = 0.07) for cows supplemented with SCFP compared to the control cows at 14:30, but were not different at 06:30 (p>0.10). Dry matter intake was not affected by SCFP supplementation (p>0.10). Milk yield increased linearly (p<0.05) with increasing levels of SCFP. Feed efficiency (milk yield/ dry matter intake) was highest (p<0.05) for cows fed 240 g/d SCFP. Cows supplemented with SCFP gained (p<0.01) body weight, while cows in the control lost body weight. Net energy balance also increased linearly (p<0.01) with increasing levels of SCFP. Concentrations of milk urea nitrogen (p<0.01) decreased linearly with increasing levels of SCFP, while no difference (p>0.10) was observed among the treatments in conversion of dietary crude protein to milk protein yield. In summary, supplementation of SCFP alleviated the negative effect of heat stress in lactating Holstein dairy cows and allowed cows to maintain higher milk production, feed efficiency and net energy balance. Effects of SCFP were dose-dependent and greater effects were observed from higher doses.