• The Korean Journal of Food And Nutrition
• /
• v.36 no.6
• /
• pp.479-488
• /
• 2023

In this study, quality properties of rapeseed oil by different roasting temperatures (140, 160, 180, and 200℃) were investigated. Roasted-pressed oil (RPO) showed a decrease in lightness and an increase in redness and yellowness with an increase in temperature compared to cold-pressed oil (CPO). In addition, the β-carotene and tocopherol content also increased in RPO as the roasting temperature increased. The tocopherol content increased by 18~20% in RPO at 200℃ compared to CPO. This increase in bioactive components led to improved radical scavenging activity dependent on roasting temperature, and RPO at 200℃ showed a 2.7-fold improvement compared to CPO. Finally, it was observed that higher roasting temperatures resulted in an extended oxidation induction period, increasing by up to 3.3 times. In conclusion, roasting is an effective method for enhancing the oil functionality of domestic rapeseed varieties. This study provides basic data for producing high-quality oil.

• Korean journal of applied entomology
• /
• v.55 no.1
• /
• pp.35-43
• /
• 2016

The temperature-dependent development of Metcalfa pruinosa overwintering eggs was investigated at ten constant temperatures (12.5, 15, 17.5, 20, 22.5, 25, 27.5, 30, 32.5, and $35{\pm}1^{\circ}C$, Relative Humidity 20~30%). All individuals collected before April 13, 2012 failed to develop into first instar larvae. In contrast, some individuals that were collected on April 11, 2013 successfully developed when reared under $20{\sim}32.5^{\circ}C$ temperature regimes. The developmental duration was shortest at $30^{\circ}C$ (13.3 days) and longest at $15^{\circ}C$ (49.6 days) in the fourth collected colony (April 26 2013). Developmental duration decreased with increasing temperature up to $30^{\circ}C$ and development was retarded at high-temperature regimes ($32.5^{\circ}C$). The lower developmental threshold was $10.1^{\circ}C$ and the thermal constant required to complete egg overwintering was 252DD. The Lactin 2 model provided the best statistical description of the relationship between temperature and the developmental rate of M. pruinosa overwintering eggs ($r^2=0.99$). The distribution of the developmental completion of overwintering eggs was well described by the 2-parameter Weibull function ($r^2=0.92$) based on the standardized development duration. However, the estimated cumulative 50% spring emergence dates of overwintering eggs were best predicted by poikilotherm rate model combined with the 2-parameter Weibull model (average difference of 1.7days between observed and estimated dates).

• Korean journal of applied entomology
• /
• v.40 no.1
• /
• pp.45-45
• /
• 2001

Development and predation of an aphidophagous gall midge, Aphidoletes aphydimyza (Rondani) , on the green peach aphid, Myzus persicae Sulzer, were studied under laboratory and greenhouse conditions. The developmental threshold temperature of the gall midge larvae was estimated to be $13^{\circ}C$. Larval and total developmental periods were 5.3 and 29 days at 25 $\pm$$2^{\circ}C$. The gall midge attacked more aphids as increasing density of peach aphids, and consumed 4 out of 10 peach aphids per day in a petri dish (9 cm in diameter) at maximum. In green house, the gall midge could control the density of the green peach aphids efficiently with a delayed density dependent-like pattern.

• Food Science and Preservation
• /
• v.23 no.5
• /
• pp.696-703
• /
• 2016

The purpose of this study was to determine the optimum re-extraction conditions of ethanol from catechin in Korean green tea (Camellia sinensis L.) using response surface methodology (RSM). The experiments were carried out according to a five level and two variable central composite design (CCD). The two independent variables were solvent ratio to sample content (1, 4, 7, 10, 13 mL/g) and extraction temperature (-20, -10, 0, 10, $20^{\circ}C$) on the dependent variables including yield, epigallocatechin (EGC), epicathchin (EC), epigallocatechingallate (EGCG), epicatechingallate (ECG), total catechin and caffeine. ANOVA results showed that Coefficients of determination ($R^2$) of estimated models for dependent variables were ranged from 0.9054~0.9778, while $R^2$ of caffeine were estimated 0.8770. The optimum ranges for the maximized extraction including yield, EGC, EC, EGCG, ECG, caffeine and total catechin were 4.5~7.5 mL/g in ratio of ethanol to sample and $-8{\sim}8^{\circ}C$ in extraction temperature. The actual values of yield, EGC, EC, EGCG, ECG, caffeine and total catechin, respectively, at the optimized conditions were 35.02%, 13.31%, 3.978%, 19.11%, 4.29%, 5.30% and 40.68%.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.223-226
• /
• 1995

Polymers have been developed and applied in many biomedical areas as well as engineering and industrial fields. The first essential to achieve successful development and applications is that properties of such polymer materials would be investigated. In many cases, such investigations are accomplished by observing polymeric behavior arising from the environmental changes such as pH, temperature, and ionic concentration. It has long been known that NMR is extremely sensitive to many biochemical and physical changes occurring in the polymer samples. In the present study we focus our study on NMR Microimaging, which is one of the important NMR applications, to characterize the swelling effect by observing the time dependent spatial variations of polymer specimens. For the samples three kinds of polyvinyl alcohol (PVA) specimens are prepared with different degrees of cross linking density. $^1H$ NMR microimages are acquired as a function of time to visualize the swelling behavior as well as volumetric changes occurring in the specimens. From the acquired time dependent images, the swelling process is exploited.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.757-762
• /
• 2002

Many reports have been shown that the buoyancy, electromagnetic force, surface tension, and gas shear stress are the driving forces of weld pool circulation in arc welding. Among them, the surface tension of molten metal plays an important role in the flow in weld pool, which are clarified by the specially designed experiments with small particles as well as the numerical simulations. The surface tension is also related to the penetration in arc welding. Therefore, a quantitative evaluation of surface tension is demanded for the development of materials and arc process control. However, there are few available data published on the surface tension of molten metals, since it depends on the temperature and the composition of materials. In this study, a new method was proposed for the evaluation of surface tension and its temperature dependence, in which it is evaluated by the equilibrium condition of acting forces under a given surface geometry, especially back surface. When this method was applied to the water pool and to the back surface of molten pool in the stationary gas tungsten arc welding of thin plate, following results were obtained. In the evaluation of surface tension of water, it was shown that the back surface geometry was very sensitive to the evaluation of surface tension and the evaluated value coincided with the surface tension of water. In the measurement of molten pool in the stationary gas tungsten arc welding, it was also shown that the comparison between the surface tension and temperature distribution across the back surface gave the temperature dependent surface tension. Applying this method to the mild steel and stainless steel plates, the surface tension with negative gradient for temperature is obtained. The evaluated values are well matched with ones in the published papers.

• Journal of the Korea Concrete Institute
• /
• v.19 no.6
• /
• pp.693-700
• /
• 2007

The maturity method is used to estimate the effects of time and temperature on the strength development of concrete. The purpose of this paper is to show how variable curing temperatures affect strength development for both normal and high-strength concrete using the maturity concept. The experimental results for normal-strength concrete show clearly the cross-over effect of strength development as the time of the peak temperature varied. However, this cross-over effect does not exist after the actual ages are converted to the temperature dependent equivalent age. In other words, the existing maturity method does not include the effect of varying the time to peak temperatures but instead includes the effect of the magnitude of peak temperatures. For high-strength concrete, the results were inconclusive. This fact for normal-strength concrete coincides with the ASTM stated limitation that the existing maturity method doesn't take into account the effect of early age temperature on long-term ultimate strength. The results of this 3-year study are used as a basis for an improved concrete maturity function.

• Journal of fish pathology
• /
• v.12 no.2
• /
• pp.107-113
• /
• 1999

The pathogenicity of the fish nodavirus causing viral nervous necrosis (VNN) of sevenband grouper, Epinephelus septemfasciatus was examined in sevenband grouper and other marine fish by intramuscular injection. Sevenband groupers of 27~104 g in body weight were highly susceptible to the fish nodavirus, but yellowtail (537 g in body weight), red seabream (207 g), rock bream (43 g), flounder (41 g), tiger puffer (27 g) and rockfish (94 g) of the sizes used to this experiment were not. The pathogenicity of the viral agent to the sevenband grouper was high without regard to fish sizes at rearing water temperature over $20^{\circ}C$, but not at $15^{\circ}C$. Therefore, susceptibility of sevenband grouper to the viral agent causing VNN was thought to be water temperature-dependent rather than fish size (age-dependent). Compared to the infectivity of the viral agent to sevenband grouper with artificial infection methods, fish were successfully affected by intramuscular, intraperitoneal, oral, dipping and cohabitation administrations although there were slight differences in mortalities among infection methods. And survival sevenband grouper after infection with the fish nodavirus was resistant to the reinfection for a long time.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.87-87
• /
• 2011

Oxide semiconductors are attractive materials for thin-film electronics and optoelectronics due to compatibility with synthesis on large-area, glass and flexible substrate. However, development of thin-film electronics has been hampered by the limited number of semiconducting oxides that are p-type. We report on the effect of the oxygen partial pressure ratio in the gas mixture on the electrical and optical properties of spinel Mg:$ZnCo_2O_4$ thin films deposited at room temperature using RF sputtering, that exhibit p-type conduction. The thin-films are deposited at room temperature in a background of oxygen using a polycrystalline Mg:$ZnCo_2O_4$ ablation target. The p-type conduction is confirmed by positive Seebeck coefficient and positive Hall coefficient. The electrical resistivity and carrier concentration in on dependent Mg:$ZnCo_2O_4$ thin films were found to be dependent on the oxygen partial pressure ratio. As a result, it is revealed that the Mg:$ZnCo_2O_4$ thin-films were greatly influenced on the electrical and optical properties by the oxygen partial pressure condition. The visible region of the spectrum of 36~85%, and hole mobility of 1.1~3.7 $cm^2$/Vs, were obtained.

• Atmosphere
• /
• v.20 no.2
• /
• pp.73-89
• /
• 2010

An updateable model output statistics (UMOS) system for daily maximum and minimum temperature ($T_M$ and $T_m$) over South Korea based on the Canadian UMOS system were developed and validated. RDAPS (regional data assimilation and prediction system) and KWRF (Korea WRF) which have quite different physics and dynamics were used for the development of UMOS system. The 20 most frequently selected potential predictors for each season, station, and forecast projection time from the 68 potential predictors of the MOS system, were used as potential predictors of the UMOS system. The UMOS equations were developed through the weighted blending of the new and old model data, with weights chosen to emphasize the new model data while including enough old model data to ensure stable equations and a smooth transition of dependency from the old model to the new model. The UMOS equations are being updated by every 7 days. The validation results of $T_M$ and $T_m$ showed that seasonal mean bias, RMSE, and correlation coefficients for the total forecast projection times are -0.41-0.17 K, 1.80-2.46 K, and 0.80-0.97, respectively. The performance is slightly better in autumn and winter than in spring and summer. Also the performance of UMOS system are clearly dependent on location, better at the coastal region than inland area. As in the MOS system, the performance of UMOS system is degraded as the forecast day increases.