• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.11
• /
• pp.1506-1511
• /
• 2018

This study presents a human sensibility evaluation method using neural network and multiple-template method on electroencephalogram(EEG). We used a multi-layer perceptron type neural network as the sensibility classifier using EEG signal. For our research objective, 10-channel EEG signals are collected from the healthy subjects. After the necessary preprocessing is performed on the acquired signals, the various EEG parameters are estimated and their discriminating performance is evaluated in terms of pattern classification capability. In our study, Linear Prediction(LP) coefficients are utilized as the feature parameters extracting the characteristics of EEG signal, and a multi-layer neural network is used for indicating the degree of human sensibility. Also, the estimation for human comfortableness is performed by varying temperature and humidity environment factors and our results showed that the proposed scheme achieved good performances for evaluation of human sensibility.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.291-296
• /
• 2002

Flammable compounds are indispensible in domestic as well as in industrial fields as fuel, solvent and raw materials. The fire and explosion properties necessary for safe storage, transport, process design and operation of handling flammable substances are lower explosive limits(LEL), upper explosive limits(UEL), flash point, fire point, AIT(auto ignition temperature), MIE(minimum ignition energy), MOC(minimum oxygen concentration) and heats of combustion.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.126-134
• /
• 2012

The purpose of this study is to investigate waterproofing performance of self adhesive sheet combined polymer resin and poly-iso butylene. For the performance estimation of external waterproofing of concrete underground structures, there can be required various properties such as adhesion strength, hair crack resistance, repeat low and high temperature test, and so on. In this study, there engineering properties of composite system using polymer resin and poly-iso butylene were examined and could be confirmed to satisfy the guidelines of KS. Especially, it was turn out that the adhesion properties was excellent and high crack-resistance up to 1.49mm will be perform.

• Journal of Applied Reliability
• /
• v.15 no.1
• /
• pp.52-59
• /
• 2015

In this Study, we tested electroluminescent film to accelerate life by temperature, humidity, voltage, and frequency. We analyzed brightness data to estimate activation energy and verify it's suitability. All of the tests performed in operating condition. Because electroluminescent film is mostly degraded by fluorescent in operating condition. Two different sample groups were tested and compared to find common parameter.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.41 no.3
• /
• pp.59-74
• /
• 2016

Electricity sales are directly measured from individual consumers, which could minimize the time gap between data collection and public announcement. Furthermore, industrial electricity sales are highly linked with production and output. Therefore, industrial electricity consumption can be used to track production and output in real time. By using the high-frequency data of industrial electricity sales, this study develops the daily electricity business index (DEBI) to capture the daily economic status. The steps used to formulate DEBI are as follows: (1)selection of the explanatory variables and period, (2) amendment of the seasonal adjustment to eliminate daily temperature and effective day effects, (3) estimation of the weighted value via variables by using PCA, (4) calculation of DEBI and commencement of validation tests. Our empirical analysis and the Hodrick-Prescott filter analysis show that DEBI is highly related to existing economic indices.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.1
• /
• pp.37-47
• /
• 2000

The Urban thermal environment is influenced and modified in many ways. One modification is brought by the anthropogenic heat generation emitted from the combustion processes and the use of energy such as industrial, domestic and traffic procedure. The anthropogenic heat generation affect an the increase of urban temperature, the well-known urban heat islands. The study on the urban thermal environment needs a great deal of the statistic data about the inner-structure of urban, the contribution of different constructions and the traffic amount on urban thermal environment in finite region. In order to overtake a quantitative analysis of effect of the anthropogenic heat, a distribution map of the urban anthropogenic heat was made using hte data of the energy consumption used at the several constructions and traffic amount of vehicles in Pusan Metropolitan. Annual mean heat flux over the 4$\textrm{km}^2$ urbanized area in Pusan is 41.5W/$m^2$, ranging from 31.4W/$m^2$ in summertime to 59.5W/$m^2$ in wintertime and maximum diurnal anthropogenic heat generation is corresponding to 10% of irradiance during summertime.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.523-537
• /
• 2004

In order to raise the accuracy of meteorological data, several numerical experiments about the usefulness of data assimilation to prediction of air pollution was carried out. Used data for data assimilation are surface meteorological components observed by Automatical Weather System with high spatial density. The usage of surface data assimilation gives changes of temperature and wind fields and the change caused by the influence of land-use on meterological simulation is more sensitive at night than noon. The data quality in assimilation it also one of the important factors to predict the meteorological field precisely and through the static IOA (Index of Agreement), simulated meteorological components with selected limited surface data assimilation are agree well with observations.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.1
• /
• pp.18-22
• /
• 2008

In this paper, the Ni-Co alloy was used for thermal stability estimation comparison with Ni structure. The proposed Ni/Ni-Co structure exhibited wider range of rapid thermal process windows, lower sheet resistance in spite of high temperature annealing up to $700^{\circ}C$ for 30 min, more uniform interface via FE-SEM analysis, NiSi phase peak. Therefore, The proposed Ni/Ni-Co structure is highly promising for highly thermal immune Ni-silicide for nano-scale MOSFET technology.

• Journal of the Korea Society for Simulation
• /
• v.5 no.1
• /
• pp.91-106
• /
• 1996

Control Variate (CV) is very useful technique for variance reduction in a wide class of queueing network simulations. However, the loss in variance reduction caused by the estimation of the optimum control coefficients is an increasing function of the number of control variables. Therefore, in some situations, it is required to select an optimal set of control variables to maximize the variance reduction . In this paper, we develop the Adaptive Control Variates (ACV) method which selects an optimal set of control variates during the simulation adatively. ACV is useful to maximize the simulation efficiency when we need iterated simulations to find an optimal solution. One such an example is the Simulated Annealing (SA) because, in SA algorithm, we have to repeat in calculating the objective function values at each temperature, The ACV can also be applied to the queueing network optimization problems to find an optimal input parameters (such as service rates) to maximize the throughput rate with a certain cost constraint.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.82-82
• /
• 2011

현재 도로 포장 설계시 동결심도의 결정은 30년간 관측한 기상자료 분석을 통해서 얻은 동결지수를 근거로 하여 동결심도를 산정한다. 그러나 기후 온난화 현상 등 변화된 기상조건과 대기온도를 근거로 작성된 동결지수와 대기온도에 따른 실제 포장 내부의 온도 변화를 반영하지 못하고 있다. 따라서, 본 연구에서는 설계시 산정된 동결심도와 실제 현장의 동결심도의 차이를 확인하기 위하여 한반도 북부지역을 동결지수에 따라 동결지수 $550{\sim}650^{\circ}C{\cdot}$일, $450{\sim}550^{\circ}C{\cdot}$일, $350{\sim}450^{\circ}C{\cdot}$일, $350^{\circ}C{\cdot}$일 이하로 구분하여 15개 지역을 선정하였고, 각 지역별로 절토부, 절성경계부, 저성토부(2m 이하 성토부) 구간으로 45단면을 구분하여 현장계측시스템을 구축하였다. 그리고 현장계측시스템으로부터 얻어진 대기온도와 포장층별 온도를 이용하여 현장 동결심도를 산정하고 동결심도 산정식의 동결심도와 비교하였다. 또한, 현장 동결심도를 이용하여 동결심도선도를 작성하였다.