• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1996.10a
• /
• pp.194-197
• /
• 1996

냉장실의 온도분포의 추정은 냉장고의 과냉현상 방지, 운전효율 향상을 위해 필요할 뿐만이 아니라 최근 많은 제품에서 제공하고 있는 집중냉각기능을 실현하는데 있어서도 필수 불가결한 과정이라 할 수 있다. 본 연구에서는 냉장실내 온도분포추정에 있어서의 문제점을 개관하고, 온도분포추정을 위한 퍼지불감대(Fuzzy Dead Zone)를 갖는 퍼지동정모델(Fuzzy Identification Model)을 제안한다. 또한, 얻어진 모델을 이용하여 냉장실내 온도센서의 최적위치에 관하여 고찰한다.

• Proceedings of the SAREK Conference
• /
• 2003.07a
• /
• pp.139-139
• /
• 2003

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.2012-2015
• /
• 2010

In this paper, the mathematical models of the superheater and the desuperheater are derived based on the fundamental laws of physics, mass and energy balance. The parameters of the models are developed for the 500[MW] thermal power plant using the actual data. The simulated model outputs are well matched with the actual ones. It is expected that the proposed models are useful for the temperature controller design of the thermal power plant.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.876-878
• /
• 2003

It was studied on the choice of potential area for red tide occurrence from oceanographic factors. Oceanographic factors of favorable marine environmental conditions for the red tide formation included warm water temperature, low salinity, high suspended solid, low phosphorus, low nitrogen. It was founded the potential areas for red tide occurrence in August 2000 by GIS conception: Yeosu~Dolsan coast, Gamak bay, Namhae coast, Marado coast, Goheung coast, Deukryang bay, respectively.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.295-298
• /
• 2002

본 논문에서는 한 장의 칼라 영상을 형성시키는 광원의 색온도를 추정하는 새로운 방법을 제안한다. 주어진 한 장의 칼라 영상으로부터 광원의 색도 좌표를 계산하는데 필요한 R,G,B 값이 특정한 칼라에 편향되지 않는 기준 백색 영역을 추출한다. 추출된 기준 백색 영역 내에서 계산된 (x,y) 색도 좌표로부터 등 색온도선을 이용하여 최종적으로 주어진 칼라 영상을 형성시키는 광원의 색온도를 추정한다. 캐나다 Simon Fraser 대학에서 제공되는 205장의 영상을 이용하여 제안된 방법과 기존 방법들을 비교 실험한 결과로부터 제안된 방법으로 추정한 색온도가 상대적으로 작은 오차를 나타냄을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.3
• /
• pp.132-135
• /
• 1985

Four types of the phase diagrams indicating the partial miscibilities in polymer-polymer or polymer-solvent systems have been explained in terms of the extended Flory-Huggins lattice theory. In this article, the term $kT_{\chi}$ in the theory is expressed as a function of temperature. Using such $a_{\chi}$-parameter, the simplest forms of geometrical conditions are derived for each type of the four partial miscibilities in polymer systems. The calculated partial miscibilities are in good agreement with the experiment.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2019.08a
• /
• pp.280-280
• /
• 2019

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2019.08a
• /
• pp.155-156
• /
• 2019

• Journal of Mechanical Science and Technology
• /
• v.16 no.11
• /
• pp.1550-1557
• /
• 2002

Diode laser sensor for measuring gas temperature and species concentration in combustion chamber was developed using 2.0 tim distributed feed back lasers. To evaluate the measurement sensitivity of diode laser sensor system, CO2 survey spectra near 2.0 Um were measured and compared with the calculated one. This diode laser absorption sensor was applied to measure gas temperatures in a premixed flat flame of CH$_4$-air mixture. Experimental results were in good agreement with the values by an R-type thermocouple within 6.12%. In addition, successful demonstration of measurement of gas temperature and species concentration in a soot flame showed the promising possibility of diode laser absorption sensors for practical combustion system with non-intrusive method.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1575-1577
• /
• 1999

XLPE is widely used as a main insulation in EHV power cables, deeply connected with thermal stress. In this study, the thermal history of XLPE insulation was examined using DSC(Differential Scanning Calorimetry). The principle is on the basis of the phenomenon that crystal in polyethylene is rearranged as it is annealed near/below the melting temperature. From the result, it was possible to define accurate temperature which was really applied on the XLPE insulation and this method was assured as a useful tool in characterization of thermal history in XLPE cable insulation.