• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.75-76
• /
• 2007

• The Journal of the Acoustical Society of Korea
• /
• v.5 no.4
• /
• pp.46-56
• /
• 1986

Hyperthermia를 사용하여 종양세포를 치료하는데 있어서 시간에 따른 동적 온도분포를 추정하 고 또, 그 온도분포에 관계하는 인자들이 동적 온도특성에 미치는 영향을 살펴보는 것은 실제 치료시에 정확한 온도제어를 위해서 반드시 필요하다. 본 논문에서는 몸속 10cm 깊이에 존재하는 원통형 종양모 델을 설정하고 초음파 동심환 변환기로 열을 집속시켰을 때 동적 온도분포 추정을 위해서 2차원 유한요 소법과 유한차분법을 이용하였다. 결과로서, 동적 온도분포에 가장 큰 영향을 미치는 인자는 혈류량이었 고, 추출된 동적 온도분포 특성값을 가지고 간단한 ON/OFF 온도제어에 적용할 수 있음을 보였다.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.5-8
• /
• 2002

Daily potential evapotranspiration was estimated using meteorological data which are observing regularly such as rainfall, temperature, humidity, wind speed, and duration of sunshine. Penman method is used practically in estimating evapotranspiration at present, and its regional coefficients were derived at 19 stations in the Korean Peninsular. Because meteorological data are observing at 77 stations under the Korea Meteorological Administration, the methodology of estimating evapotranspiration using meteorological data will be able to be applied in more regions than Penman method.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.386-389
• /
• 2006

The sea surface wind speed (SSWS) derived by microwave radiometer can be contaminated by change of microwave brightness temperature owing to the angle between the sensor azimuth and the wind direction (Relative Wind Direction). We attempt to correct the contamination to the SSWS derived by Advanced Microwave Scanning Radiometer (AMSR) on Advanced Earth Observing Satellite II (ADEOS-II), by applying the method proposed by Konda and Shibata (2004). The improvement of accuracy of the SSWS estimation amounts to roughly 60% of the error caused by the RWD effect.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.212-217
• /
• 1993

In this paper, the hardening depth in Laser surface hardening process is estimated using a multilayered neural network. Input data of the neural network are surface temperature of five points, power and travelling speed of Laser beam. A FDM(finite difference method) is used for modeling the Laser surface hardening process. This model is used to obtain the network's training data sample and to evaluate the performance of the neural network estimator. The simulational results showed that the proposed scheme can be used to estimate the hardening depth on real time.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.803-805
• /
• 2008

For the life estimation of CCFLs in edge-lit LCD modules has been required CCFL blackening test, which is executed in the state of low current and long-time operation under the high temperature condition. We investigated the reason why CCFL blackening happened more easily in the above test conditions and the way how mechanical parts had influence upon CCFL blackening in the edge-lit LCD modules.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.396.1-396
• /
• 2002

The AVT under traffic-induced vibrations was carried out on Namhae Suspension bridge in Korea. Mode shapes as well as natural frequencies up to the 15th mode were acquired exactly, and the effect of traffic mass and temperature on measured natural frequencies was investigated. The results from the AVT are compared with those from forced vibration test(FVT) and FE analysis. (omitted)

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.166-169
• /
• 1995

An intelligent system which is an integration of multi-functional instrumentation (MFI) and a neural network is discussed. According to some experiments of temperature and wind velocity it is clear that this system can learn the data structure of two parameters above. So it makes good performances for estimations of non-sample data.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.497-500
• /
• 2000

This paper describes the procedures to estimate for the design thermal loads on prestressed concrete box girder bridges on th basis of the extreme analysis of the temperature data obtained from long-term thermal analyses. Long-term thermal analyses using the environmental data for three years were conducted, and the extreme distributions of th thermal loads are then determined by the tail-equivalence method, and the thermal loads corresponding to selected return period are calculated. Finally, the results are compared to the specifications suggested in a current design code for thermal loads.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.145-146
• /
• 2002

1960년 이전 대기 중 PCBs(polychlorinated biphenyls)의 유입은 여러 나라에서 다량으로 사용한 PCBs에 의해 많이 좌우되었다. 대기 중 PCBs의 최대 배출은 1960년대 후반이었으며 그 이후로 점점 감소하는 추세이다. 오늘날 이 화합물은 사용이 금지되었으며 대부분의 국가에서 법적인 근거를 마련하였다. 그러므로 최근 대기 중 PCBs의 발생원은 이전에 배출된 화합물이 재휘발(revolatilzation)한 결과라고 할 수 있다. 그러나 현재에도 PCBs가 포함된 설비를 사용하고 있으며, PCBs가 함유된 쓰레기가 여전히 환경중으로 배출되고 있는 실정이다. (중략)