• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.2
• /
• pp.95-101
• /
• 2019

High voltage impulse(HVI) has been gained attention as an alternate technique controlling $CaCO_3$ scale formation. Investigation of key operational parameters for HVI is important, however, those had not been reported yet. In this study, the effect of temperature and applied voltage of HVI on $Ca^{2+}$ concentration was studied. As the applied voltage from 0 to 15kV and the temperature increased from 20 to $60^{\circ}C$, the $Ca^{2+}$ concentration decreased, indicating that the aqueous $Ca^{2+}$ precipitated to $CaCO_3$. The $Ca^{2+}$ concentration decreased up to 81% under the condition of 15kV and $60^{\circ}C$. Rate constant for the precipitation reaction, k was determined under different temper1ature and voltage. The reaction rate constant under the 15kV and $60^{\circ}C$ condition was evaluated to $66{\times}10^{-3}L/(mmol{\cdot}hr)$, which was 5 times greater than the k of the reaction without HVI at same temperature. The increases in k by HVI at higher temperature region(40 to $60^{\circ}C$) was much greater than at lower temperature region(20 to $40^{\circ}C$), which implies temperature is more important parameter than voltage for reducing $Ca^{2+}$ concentration at high temperature region. These results show that the HVI induction accelerates the precipitation to $CaCO_3$, particularly much faster at higher temperature.

• Steel and Composite Structures
• /
• v.39 no.4
• /
• pp.401-417
• /
• 2021

This study experimentally reveals the influence of welding on grade S690Q high strength steel (HSS) butt joints from both micro and macro levels. Total eight butt joints, taking plate thickness and welding heat input as principal factors, were welded by shielded metal arc welding. In micro level, the microstructure transformations of the coarse grain heat affected zone (CGHAZ), the fine grain heat affected zone (FGHAZ) and the tempering zone occurred during welding were observed under light optical microscopy, and the corresponding mechanical performance of those areas were explored by micro-hardness tests. In macro level, standard tensile tests were conducted to investigate the impacts of welding on tensile behaviour of S690Q HSS butt joints. The test results showed that the main microstructure of S690Q HSS before welding was tempered martensite. After welding, the original microstructure was transformed to granular bainite in the CGHAZ, and to ferrite and cementite in the FGHAZ. For the tempering zone, some temper martensite decomposed to ferrite. The performed micro-hardness tests revealed that an obvious "soft layer" occurred in HAZ, and the HAZ size increased as the heat input increased. However, under the same level of heat input, the HAZ size decreased as the plate thickness increased. Subsequent coupon tensile tests found that all joints eventually failed within the HAZ with reduced tensile strength when compared with the base material. Similar to the size of the HAZ, the reduction of tensile strength increased as the welding heat input increased but decreased as the thickness of the plate increased.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.9 no.1
• /
• pp.98-104
• /
• 1998

A 12-year-old girl with a 6 year history of childhood-onset schizophrenia required 2 hospitalizations and long-term clozapine trial due to inadequate responses to combinations of typical neuroleptics and traditional treatments of schizophrenic disorder. On admission, she had continuous auditory and visual hallucinations, persecutory delusion, emotional instability, regression of behaviors including temper tantrums as well as specific developmental delays in learning, language, and motor coordination. The clozapine trial significantly reduced most of the positive symptoms, and facilitated in successful discharge from the hospital. During the 4 year clozapine treatment, no significant adverse reactions were noted, and she returned to a structured school setting with minimal degrees of schizophrenic symptoms. From this clinical experience, we suggest that clozapine might be safe and effective in treating treatment-refractory schizophrenic children.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.2 s.38
• /
• pp.77-87
• /
• 1991

The purpose of this study were to investigate the bed climate and the physiological responses in sleep on the traditional Korean floor heating system called Ondol. Ondol has been the most widely used heating system in Korea, yet there has been a no systematic studies examined its environmental effects on human body. Experimental room was constructed to match the typical thermal environment of Ondol. (floor surface temperature; $32\~33^{\circ}C$, air temperature; $22.5{\pm}1.0^{\circ}C$, relative humidity; $64.0{\pm}4.0\%$RH, air velocity; 0.25 m/sec.) Three different combinations of bedclothes were chosen for the experiment based on the study results showing that they were the most widely used types in Korea. Type 1 was the combination of a cotton-padded mattress with a cotton-padded Korean style blanket. Type 2 was a cotton-padded mattress with a cotton-guilted Korean style blanket. Type 3 was a cotton-padded matless with a polyacryl blanket. Thermal resistance of each of these combina-tions in the bedclothes was measured using thermal manikin. Two adult female was chosen for the seven hour sleeping experiment which was known to be the average sleeping hours of Korean adult female. The bed climate was measured with the temperature under the mattress, the surface temper-ature of the mattress, and the air temperature and the relative humidity of the space between the mattress and blanket. The skin temperature, rectal temperature of the subjects and the bed climate were measured eight times, one hour before the experiment and every hour during the experiment. The weight loss and the subjective sensation were measured for the each subjects before and after the experiment. The procedure was repeated twice with two subjects and three types of bedclothes, yielding twelve combinations of results. The results were as follows; 1. With the surface temperature of $32\~33^{\circ}C$ of Ondol, air temperature was $22.5{\pm}1.0^{\circ}C$ with $64.0{\pm}4.0\%$ RH. The bed climates were $39.2{\pm}40.8^{\circ}C$ under the mattress, $35.3\~36.2^{\circ}C$ on the mattress, and $26.9\~32.0^{\circ}C$ with $56.0\~71.3\%$ RH between the mattress and the blanket. 2. Mean skim temperature during sleep was 34.2"C with local skin temperature of $34.0\~35.5^{\circ}C$. The skin temperatures of abdomen, thigh, foot were higher than the other parts of the body. 3. The skin temperature of chest, thigh, leg and back varied significantly according to the combinations of bedclothes. With the cotton-padded blanket, the skin temperature was the highest, while with the cotton-guilted blanket showed lowest. 4. Examining the relationship between the mean skin temperature and the local skin temper-ature, the chest temperature showed the highest correlation with the former. Therefore, the chest temperature can be recommended to represent the skin temperature in measuring the bed climate. 5. The subjective bed climates were $39.0\~40.4^{\circ}C$ under the mattress, $35.2\~35.9^{\circ}C$ on the mattress, $29.8\~31.6^{\circ}C$ with $56.8\~68.4\%$ RH between the mattress and blanket. In sum, from this experiment we not only obtained the reliable value of bed climates on Ondol, but also showed that the bed climates and the physiological responses were affected differently according to the materials of bed clothes.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.138-164
• /
• 2022

The Neolithic shell midden in Daejuk-ri, Seosan, is distributed on the gentle slope of a low hill close to the west coast. The bedrock of the area consists mainly of schist with various mafic minerals, but shows a partial gneiss pattern. The site consists of loamy topsoil and clay loam subsoil, and the degree of siallization is relatively low. Although the pottery excavated from the shell midden shares mostly similar features, a variety of shapes and patterns coexist. The surface colors, thickness and physical properties are slightly different. The pottery can be subdivided into three types (IA, IB and II) according to the composition of the body clay, the temper and the existence of a black core. Types IA and IB are colorless mineral pottery with a non-black or black core respectively. TypeII is colored mineral pottery with a non-black core. Type I pottery also contains non-plastic colored minerals, but type II contains a large amount of biotite, chlorite, talc, amphibole, diopside and tremolite, which include a large amount of Mg and Fe. The studied pottery contains a small amount of organic matter. Considering the grain size and relatively poor sorting and roundness of the non-plastic particles, the pottery appears to be made by adding coarse non-plastic tempers for special purposes to the untreated weathered soil around the site. The three types of pottery seem to have been incompletely fired in general. While type IB has the lowest degree of oxidation, typeII shows the highest degree of redness and oxidation. It can be interpreted that these differences depend on the firing temperature and the ratio of non-plastic particles. Through a synthesis of the minerals, geochemical data and thermal history, it can be determined that the firing temperature ranged from 600 to 700℃. The pottery types of the Daejuk-ri Shell Midden have slightly different production conditions, mineral compositions, and physical properties, but have undergone similar production processes with basically the same clay materials. The clay is almost identical to the composition of the bedrock and weathered soil distributed in the Daejuk-ri area. Currently, there is an industrial complex in the area, so it is difficult to confirm the soil and geological distribution of the site. However, it is highly probable that the area around the site was self-sufficient for the clay and tempers required for the production of the Neolithic pottery. Therefore, it can be interpreted that the group that left the shell midden in Daejuk-ri lived near the site, visited the site for the purpose of collecting and processing shellfish, and discarded the broken pottery along with shells.

• The Korean Journal of Community Living Science
• /
• v.19 no.2
• /
• pp.283-295
• /
• 2008

The slimness favored trend made students shape up body image by weight control using restrained eating. Many students especially female ones tend to be in eating disorder status. The aim of this study was to find the relation between weight, eating habits and dietary self efficacy in the selected middle school girl students group with high risk eating disorder (7.9%) and the one with low risk eating disorder (24.1%). This study was conducted by EAT-26 questionnaire method and all the data was analyzed by SAS (Statistical Analysis System) program. The results were as follows; The physical condition of eating disorder students (159.5cm height, 50.7kg weight and 97.4% PIBW) was higher and bigger than that of normal students(158.2 cm, 47.2 kg, and 92.6% PIBW). Weight control experience in the high risk group (69.4%) was significantly more frequent than normal group (p<0.001). The gap between actual body weight and desired weight was higher in high risk eating disorder group than in normal group (p<0.001). Dietary self-efficacy score of middle school female students in the high risk eating disorder group was high when they were in temper, in confusion, and after argument. However, when they were in cooking (p<0.01), with friends (p<0.05), in assembling dishes (p<0.01), and with family (p<0.05) the dietary self-efficacy score of high risk group was lower than that of normal group. In the high risk eating disorder group, eating speed was often faster (p<0.05) and overeating rate (p<0.01) was higher than in normal group. In general, EAT-26 score was correlated positively with gap weight, but negatively correlated with dietary self efficacy score(p<0.01). Gap weight and dietary self efficacy were significantly different in normal group. however, there was no relation in high risk eating disorder group. Under the circumstance of high risk eating disorder, as weight and dietary self efficacy did not affect the relation with eating disorder score, when it is determined as eating disorder some other factors besides weight and diet self efficacy seem to affect the eating disorder score. In conclusion, the factors related with eating disorder were gap weight and some items of dietary self efficacy. Thus, correct understanding of healthy weight and dietary self efficacy enhancement require the development of nutrition education contents and the practice of nutrition education.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.2
• /
• pp.63-72
• /
• 2014

This study is conducted to investigate mineralogical characteristics and estimate firing temperature and condition of earthenwares in the 5-6th Century which are found at ancient tombs in Gyo-dong, Gyo-ri, Changnyeong-eup, Changnyeong-gun, Gyeongsangnam-do, TKorea by applying petrological methods. For this study, mineralogical analysis, microtexture observation and chemical analysis were conducted. According to observations using a polarization microscope, the potshreds are mainly composed of quartz and feldspar and consist of some felsic volcanics, tempers, opaques and mullite, hematite and spinel were found under XRD and FTIR analysis. The flow pastes are observed in many potshreds, and it indicate that this textures made by the mixing process or the pottery made from the mixture of 2 sorts of clays at least. They dose not show the features of the potshreds firing under temperature of $1,200-1,300^{\circ}C$ rather than the earthenware firing under relatively low temperature of $1,000^{\circ}C$ approximately because of the existence of a number of pores and the crystals of the specific minerals. The growths mostly of mullite on the surface and into the cracks of the potshreds indicate that the firing condition was not uniform to make even temperature and oxidation. Most of the pottery shreds have felsic volcanic fragments and some of them have cristobalite which is formed at the temperature of more than 1,470^{\circ}C$. But considering the estimated firing temperature, these are not formed during firing but included in the original clay.

• Korean Journal of Food Science and Technology
• /
• v.38 no.6
• /
• pp.756-761
• /
• 2006

The physical and sensory properties of puffed mulberry-rice snack (PMRS) by pellet with mulberry leaf and brown rice flour were evaluated at different temper moisture contents and at varying puffing temperatures. The mulberry pellets were prepared using a food extruder to extrude the dough made from mulberry leaf powder and brown rice flour. The mulberry pellets were tempered to 14, 16, and 18% moisture content and were puffed at 220, 230, and 240$^{\circ}C$ for 4, 5, and 6 sec. The specific volume and breaking strength of PMRS increased with heating temperature and time; however, the breaking strength decreased as the moisture content increased. The Hunter L value decreased as the heating temperature and time increased, showing an especially large decrease with increased heating time. The a and b values increased with increasing heating temperature and time. These results indicated that PMRS, which has a distinctive flavor and color, could be effectively used as a functional food with the use of a puffing machine and that PMRS shows potential for use as new snack product.

• Research in Community and Public Health Nursing
• /
• v.14 no.2
• /
• pp.274-286
• /
• 2003

Purpose: The purpose of this study is to provide a basic data that may help develop health promotion programs by identifying health problems and perceived health status of the rural elderly. Method: The subjects of the study were 366 elders recruited from 24 villages located in Mari Myun, Geochang Gun, Korea. The sample was selected using a quota sampling method. The instruments used in the study included 117 items for health problems and 4 items for perceived health status. The data were analyzed with descriptive statistics, Pearson correlation coefficient, t-test, ANOVA and scheffe test using SPSS program. Results: 1) The most prevalent health problem was ailments in 'musculoskeletal system', followed by 'fatigue', 'eyes and ears', 'genitourinary system', 'mood & temper patterns', 'cardiovascular system', 'digestive system', 'nervous system', 'respiratory system' and 'skin'. 2) Womens health problems were more prevalent than men's health problems. 3) The mean score of perceived health status was 7.68. 4) Health problems of the rural elderly were significantly correlated with demographic variables such as education (F=9.532, p=0.000), gender (t=-4.246, p=0.000), marital status (t=-3.531, p=0.000), family type (F=5.742, p=0.00l), and occupation (t=3.356, p=0.001). 5) Perceived health status of the rural elderly was significantly correlated with demographic variables such as education (F=6.408, p=0.002), gender (t=2.949, p=0.003), marital status (t=0.802, p=0.034), family type (F=4.844, p=0.003), and occupation (t=-2.485, p=0.011). 6) Health problems of the rural elderly were significantly correlated with life style pattern variables such as drinking (F=5.223, p=0.006), smoking (F=4.087, p=0.007), salty food intake (F=3.424, p=0.034), greenish yellow vegetables intake (F=6.343, p=0.002) and fat food intake (F=5.327, p=0.005). 7) Perceived health status of the rural elderly was significantly correlated with life style pattern variables such as sleeping hours (F=3.966, p=0.020) and drinking (F=7.231. p=0.001). Conclusion: The findings of this study indicate that nurses need to understand health problems and perceived health status of the rural elderly and to develop health promotion programs for them in the future in the consideration of regional and environmental elements.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.229-245
• /
• 2010

The pupose of this study was to identify the material characteristics, firing environments and making techniques for the jar coffins from the Oryangdong kiln site and the Ungokdong tomb site in Naju. All jar coffins had very similar physical, mineralogical and geochemical characteristics, although it was excavated from the different sites. The wall thickness of the jar coffins was about 2.3 to 5.3 cm. Under the microscopy, the jar coffins include a large quantity of various quartz with some microcrystalline and showed partly orthoclase and biotite. It is presumed that the mineral sherds added to maintain the thick wall and to control the percentage of contraction during drying and firing of jar coffins and it has contained about 11.4 to 19.8 %. Firing temperature of the jar coffins is estimated as 1,000 to $1,150^{\circ}C$. Also, all jar coffins and soils show similar geochemical behavior of elements and clay-mineralization degree within the site. This indicates making that the soil is probable to be a raw material of the jar coffins. But it shows different characteristics in major elements of soils which is collected at the kiln floor and the trench region of the Oryangdong kiln site because of the lack of quartz and feldspar in the soils. Therefore, it can use of the jar coffins making clay, if it goes through a simple special process such as mixing temper.