• 한국전기전자재료학회논문지
• /
• 제11권1호
• /
• pp.74-81
• /
• 1998

It is not good joint that today's traffic control system that the course of traffic volume increase tendency is followed, in the traffic volume is approched into the time of my car. Accordingly when we analyzed the existing traffic signal control system, the traffic signal system is developed from the machine type that the motor was centered, to get up to date, to the intelligence electron signal control system. But yet, when we have a test and a A/S on the control circuit, the circuit that is designed to the center IC and ROM are complicated. Also, the time of pass lamp that the car line stream is going, can not extended automatically a time till the traffic volume is decreased to the same direction. This theme must be a real time intelligence control system that the time of pass lamp can extend aumatically. The circuit of sequence ladder diagram on the traffic signal control of a crossroads that is desinged, can be satisfied the complicated vehicle order. Therefore when the circuit is changed, the new developed system is economical with that dosen't needs any of components to require the circuit equipment, and the time is saved with needlessness of the circuit wiring again, and have a much trustworthy. The control method of pass signal lamp in the car line stream connecting among PLC and Relay and Temp Sensor, can be changed to hand operation and to semi-automation and to all-automation. New intelligence traffic signal system is composed with all-together system of T Sensor + Video Camera + IBM PC that is able to guiding the establishment of traffic order.

• 한국세라믹학회지
• /
• 제27권4호
• /
• pp.529-535
• /
• 1990

This paper describes the factors which control the impedance-relative humidity characteristics of the TiO2-V2O5 humidity sensor. To obtain the quantitative relationships between impedance and many manufacturing parameters such as V2O5mol%, the sintering time and temperature, various sets of samples are preared and tested. With changing relative hymidity from 20% to 80%, it is measrued that the corresponding capacitance and impedance from the semicircles which complex impedance plots make. As a result we found that the impedance-relative humidity characteristics are mainly controlled by the doping amount of V2O5 total pore volume and bulk resistence of the elements. We can assume the equivalent circuits of each samples and finally control the sintering time to get a linear humidity impedance response curve which plays an important role in device making. 4mol% V2O5-TiO2 specimen sintered at 90$0^{\circ}C$ for 10min. show liear log(Z) vs. RH characteristics and 10mol% V2O5-TiO2 specimen sintered at the same temp. for 20min. show linear (Z) vs. RH.

• 조명전기설비학회논문지
• /
• 제22권12호
• /
• pp.115-121
• /
• 2008

현재 추진되고 있는 무선통신을 기반으로 하는 열차제어시스템 개발 프로젝트에서는 상호운영성 및 상호교환성을 고려하는 하부시스템의 개발을 목표로 하고 있다. 이 프로젝트는 상위 시스템 수준의 설계보다는 주로 하부시스템의 설계에 집중되어 있다. 시스템에 대한 시험평가는 시스템 사양에 대한 만족 여부를 확인하는 것이며, 이에 따라 시스템 수준으로 통합된 시스템 사양서가 필요하다. 본 연구에서는 시스템 사양서가 마련되지 않은 하부시스템의 설계단계에서 최상위 시스템 수준의 시험평가에 대한 방안을 제시하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제12권2호
• /
• pp.3-9
• /
• 1984

This study was carried out to examine the practicality of DAP[$(NH_4)_2HPO_4$] as fire retardant for plywood by static bending test the redried plywoods which had been soaked in 20% $(NH_4)_2HPO_4$ solution. Being hot/cold soaked in the solution for 3/3, 6/3, 9/3 and 12/3 hours and redried by cyclic press-drying method at the platen temp. of 130, 145, 100 and $175^{\circ}C$, the treated plywoods were tested to offer the mechanical data, that is, $S_{pl}$(stress at proportional limit), MOE(modulus of elasticity), MOR(modulus of rupture) and $W_{pl}$(work per unit volume to proportional limit ) in flexure. The results obtained were summarized as follows. 1. $S_{pl}$ of fire retardant treated plywoods ("FRP" would be used hereinafter) decreased as the platen temperature increased, but it was superior to that of non-treated plywoods(Control) at $160^{\circ}C$ or higher. 2. MOE of FRP decreased roughly with the increase of temperature, hut this tendency was not constant. And the value of FRP was higher than that of Control even at $175^{\circ}C$. 3. MOR of FRP showed same temperature-dependent tendency as MOE, but it was influenced more sensitively at the higher temperature. 4. $W_{pl}$ of FRP also decreased gradually with the increase of platen temperature and the value in DAP 9/3 treatment was Jess than 70% of control plywoods. 5. In view of redrying time and mechanical properties, the most reasonable platen temperature for DAP treated FRP was $160^{\circ}C$ in this study.

• 한국식품영양과학회지
• /
• 제28권3호
• /
• pp.586-592
• /
• 1999

Microwave assisted extraction(MAE) is known as a more environmental friendly process with economic advantages in terms of less time, less solvent, less energy and less wastes than the current time consuming reflux method. It was applied to develop a rapid extraction method for soluble ginseng components that are major materials used for the processing of ginseng products. In a comparative study between pre established MAE(ethanol 60%, power 80 W, process time 4 min$\times$5) and current extraction method(ethanol 80%, temp. 85oC, time 8 hr$\times$5), MAE was more efficient than the current method to obtain an extract yield(soluble solid), but it was insufficient to extract individual ginsenosides, total phenols, reducing components and acidic polysaccharides. MAE with 80% ethanol by 5 times showed, however, that its extraction efficiency on soluble solid, crude saponin, major ginsenosides, and the other components was equal or superior to that of the current method, indicating that ethanol concentration is one of the critical parameters influencing the MAE process. The quality of ginseng extracts from MAE was assured by evaluating the corresponding standards and by comparing TLC and HPLC patterns with the control.

• KSBB Journal
• /
• 제14권5호
• /
• pp.621-627
• /
• 1999

용량 450 L의 음식물 쓰레기 퇴비화 장치를 설계하여, 유입공기량, 교반, 접종 조건에 변화를 주어 퇴비화 장치의 성능을 실험하였다. RUN 1은 1일 2회 5분간 교반하고, 유입공기량을 22.7 L/min로 고정하였다. RUN 2, 3에서는 지속적으로 교반하고, 유입공기량은 퇴비내부의 온도를 5$0^{\circ}C$ 이상 유지하고, 또 산소농도를 7 mol% 이하로 떨어지지 않도록 10 L/min, 15 L/min, 20 L/min으로 수시로 조절하였다. RUN 3는 접종효과를 보기 위하여 퇴비에 완성된 퇴비를 10 wt% 접종하여 RUN 1, 2와 비교하였다. 지속적으로 교반하고, 온도와 산소 농도에 따라 유입공기량을 조절한 RUN 2와 3에서 RUN 1보다 더 빠른 퇴비화가 이루어졌다 .그리고, $CO_2$농도와 휘발성 유기물 감소에서는 접종한 RUN 3가 RUN 1, 2보다 높았으나, C/N 비, pH 변화, 미생물 개체수에서는 뚜렷한 접종효과가 나타나지 않았다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.108-108
• /
• 2009

니켈기지의 석출강화 초내열합금은 가스터빈의 고온부 부품 제조에 널리 사용되고 있다. 장시간 동안 부품의 강성 유지와 구조적 안정성을 확보하기 위해서는 니켈기지의 합금에 감마프라임 생성을 위한 원소를 첨가하는데 이에 따른 용접성의 저하 때문에 보통 초합금의 용접은 고온에서 수행하게 된다. 그러나 레이저용접의 경우는 용접변수 및 입열제어가 용이해 상온에서 초합금의 용접이 가능한 장점이 있다. 본 연구에서는 일반적인 재료로 연성이 좋은 STS304 판재와 실제 블레이드의 재료로 사용되는 니켈계 석출강화 합금인 GTD 111DS 모재에 $CO_2$ 레이저를 이용하여 용접을 실시하였고 적용파우더와 파워, 용접속도 및 파우더 공급량 등을 달리 하였다. STS304 판재 사용시 Rene 80과 IN 625 파우더 모두 용접부에서 균열이 발생하지 않았다. 그러나 GTD 111DS 모재의 경우 IN 625 파우더에서는 결함이 없었으나 Rene 80 파우더를 사용시에는 용접부에 균열이 발생하였다. IN 625 파우더는 모재보다 기계적 성질이 떨어지는 문제가 있으나 Rene 80은 모재와 동등 이상의 기계적 성질을 보유하고 있기 때문에 Rene 80 의 적용을 위해 균열이 발생하지 않는 용접변수의 제어를 시도하였다. 용접변수의 조정 결과 레이저 파워와 파우더 공급량을 낮추고 용접속도를 높여 균열이 발생하지 않는 최적의 용접변수를 설정할 수 있었다. 최적화된 용접변수를 적용, 용접한 시편의 인장값을 보면 GTD 111DS 모재에 Rene 80 파우더로 용접된 시편의 인장강도가 상온/고온($760^{\circ}C$)의 조건에서 각각 GTD 111DS 모재의 인장강도 보다 높은 값을 나타내었다.

• 한국식품저장유통학회지
• /
• 제9권3호
• /
• pp.315-320
• /
• 2002

전통메주의 과다건조로 인한 품질저하 및 유해 곰팡이 오염으로 인한 위생적 문제를 개선하기 위하여 백국균(Roligosporus)을 종국 제조에 이용하여 "캡슐형 메주"를 착안하고 그 품질특성을 조사하였다. R oligosporus을 0.5, 1, 2% (w/w) 비율로 첨가하여 캡슐형 메주와 종국을 넣지 않고 성형한 대조구 I,II형을 10~15$^{\circ}C$에서 3일간의 자연 건조하였다. 27일간 실외에서 발효한 대조구 I형이라 하고, 대조구 II형과 캡슐 타입 메주는 $25^{\circ}C$에서 7일간의 1차 발효(습도 80%)와 20일간의 실외 2차 발효(2.7$^{\circ}C$, 12월)를 실시하여 제조하여 이들의 품질특성을 상호, 비교하였다. 수분함량은 대조구 메주보다 캡슐형 메주에서 2.88~7.55%까지 높은 함량 차이를 보였다. pH값과 적정산도는 유의적인 차이가 없었다. 아미노태 질소는 대조구 I형(347.2 mg%)보다 캡슐형 메주군(800.80, 816.0, 901.60 mg%)은 대조구 I형보다 2.2~2.6배의 높은 발효율을 보였다. 환원당 함량은 캡슐형 메주군이 2.78~3.13%로 대조구 I형은 2.10%, 대조구 II형은 2.31%에 유사한 값을 나타냈다. 대조구 I형의 색차계 색도의 명도(L)값은 대조구 II형 및 캡슐형 메주보다 높았다. 메주보다 높았다.

• 한국식품조리과학회지
• /
• 제14권1호
• /
• pp.106-113
• /
• 1998

The purpose of this study is to investigate the antimicrobial effect of mugwort (Artemisia asiatica Nakai) on the rice cake and bread preservation, and to identify their antimicrobial compounds. The mugwort extracts showed complete inhibition on the growth of Bacillus subtilis and Staphylococcus aureus at 250 $\mu\textrm{g}$/ml level. Antimicrobial activi쇼 of mugwort extract were stronger than that of commercial antimicrobial agent. Five % of sodium propionate solution showed complete inhibition on the growth of B. subtilis, E. coli and S. aureus, but L. plantarum was inhibited 50.87% at the same concentration. When various amounts of freeze-dried mugwort powder were added in sulgis (steamed rice cake), 3% ssooksulgi (mugwort powder added sulgi) had quite lower level of total bacterial count (5.5$\times$$10^/5 CFU/g) compared with the control group (1.4$\times$$10^/7 CFU/g) at ambient temp. (30$\pm$1$^{\circ}C$) after 72 hr. Three % addition of mugwort showed 2 days extention of shelf-life of rice cake. The sensory qualities of ssooksulgi has no significant difference in moistness, consistency, cohesiveness, afterswallowing and overall quality compared with control group. Ssooksulgi with 3% of mugwort powder had the best overall quality in sensory test. The methanol extract of 500 $\mu\textrm{g}$/ml of mugwort could lead the successful retardation of the growth of putrefactive microorganism during the incubation of rice cake at 37$^{\circ}C$ for 24 hr. On the other hand, coumarin (Sigma) had 54% inhibitory effect at 500 $\mu\textrm{g}$/ml level, and (E,E)-2,4-decadienal completely inhibited the growth of putrefactive microorganism of whitesulgi at 100 $\mu\textrm{g}$/ml level during the incubation at 37$^{\circ}C$ for 48 hr.48 hr.

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.19-27
• /
• 2013

PURPOSES : This study aims to investigate the snow-melt effects of an underground electric heater's snow-melt system via a field performance test, for evaluating the suitability of the system for use on a concrete pavement. The study also investigates the effectiveness of dynamic measures for clearing snow after snowfall events. METHODS : In order to check the field applicability, in November 2010, specimens were prepared from materials used for constructing concrete pavements, and underground electric heating meshes (HOT-mesh) were buried at depths of 50 mm and 100 mm at the site of the Incheon International Airport Construction Research Institute. Further, an automatic heating control system, including a motion sensor and pavement-temperature-controlled sensor, were installed at the site; the former sensor was intended for determining snow-melt effects of the heating control system for different snowfall intensities. Pavement snow-melt effects on snowy days from December 2010 to January 2011 were examined by managing the electric heating meshes and the heating control system. In addition, data on pavement temperature changes resulting from the use of the heating meshes and heating control system and on the dependence of the correlation between the outdoor air temperature and the time taken for the required temperature rise on the depth of the heating meshes were collected and analyzed. RESULTS : The effects of the heating control system's preheat temperature and the hot meshes buried at depths of 50 mm and 100 mm on the melting of snow for snowfalls of different intensities have been verified. From the study of the time taken for the specimen's surface temperature to increase from the preheat temperature ($0^{\circ}C$) to the reference temperature ($5{\sim}8^{\circ}C$) for different snowfall intensities, the correlation between the burial depth and outdoor air temperature has been determined to be as follows: Time=15.10+1.141Depth-6.465Temp CONCLUSIONS : The following measures are suggested. For the effective use of the electric heating mesh, it should be located under a slab it may be put to practical use by positioning it under a slab. From the management aspect, the heating control system should be adjusted according to weather conditions, that is, the snowfall intensity.