• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.668-673
• /
• 2000

The influence of storage atmosphere on ethylene production, quality attributes and storage injury of 'Tsugaru' apples was investigated. Apples were stored in 1% $O_2+1%\;CO_2,\;1%\;O_2+3%\;CO_2,\;3%\;O_2+1%\;CO_2,\;3%\;O_2+3%\;CO_2$ and air at $0^{\circ}C$ for 5 months. Ethylene production was more suppressed by 1% $O_2$ than 3% $O_2$ atmospheres regardless $CO_2$ levels. The loss of flesh firmness and the decrease of titratable acidity were not significantly different among the storage atmospheres until 3 months of storage but more retarded by 1% $O_2$ than 3% $O_2$ atmospheres thereafter. Soluble solid content was unaffected by the storage atmosphere, but the content tended to be increased until 2 months of storage and then not varied. Ethanol content increased up to a peak level followed by a gradual loss during storage in CA but increased continuously in air. In the sensory evaluation after storage for 5 months, hardness, tartness and overall acceptability of apples stored in 1% $O_2$ atmospheres were significantly higher than those stored in the others. There was no fruit injury or off-flavor production resulting from the 1% $O_2$ atmospheres. The incidence of bitter pit was reduced as storage $O_2$ level decreased. The results show that the optimum conditions of CA storage for 'Tsugaru' apples are $0^{\circ}C$ and 1% $O_2+1{\sim}3%\;CO_2$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.446-458
• /
• 2017

In order to make a decision about the acquisition of command control communication weapon systems considering the client's technology level requirements, the improvement of the domestic technology level and security of core technology, the person in charge can perform technology evaluation/analysis based on command control communication weapon system patent data. As a method of collecting such patent data, we can collect the patent data of government-designated (Defense Acquisition Program Act Article 35) companies (11 Major defense companies/9 General defense companies) through the Korea Intellectual Property Rights Information System (KIPRIS) of the Korean Intellectual Property Office (KIPO) In this way, we collected 1,526 patents and 134 International Patent Classification (IPC) types through the KIPRIS of the KIPO. Based on these data, we performed three types of analysis, General information analysis, Principal Components Analysis (PCA) and Network analysis, and extracted 27, 19 and 13 IPC types from them, respectively. Based on the above three analysis results, we confirmed 8 IPC types (F41A, F41G, G06F, G01S, H04B, H04L, H04M and H04W) as the key technologies and representative technology fields of domestic communication-electronics defense companies.

• Korean small business review
• /
• v.43 no.1
• /
• pp.51-83
• /
• 2021

This study empirically examined how the technology innovation competence of the 4th Industrial Revolution Enterprises affects management performance. It also analyzed whether there would be any difference in business performance between the 4th Industrial Revolution Enterprises and the non-4th Industrial Revolution Enterprises. The samples for analysis were analyzed using in-situ data of 2,543 enterprises classified as technical innovation enterprises and the 4th Industrial Revolution Enterprises through Korea Technology Finance Corporation's in-house technical evaluation. Variables for technology innovation competence were analyzed using variables such as the size of manpower of research and development, the level of research and development organizations, the number of intellectual property rights, the ratio of intangible assets, the amount of knowledge properties, the amount of research and development investment, and the intensiveness degree of research and development. In terms of the impact of the 4th Industrial Revolution Enterprises' technology innovation competence on business performance, all factors except for the level of research and development organizations were found to affect business performance, which supported the study hypothesis. In particular, it was confirmed that the amount of knowledge properties has had a relatively greater impact on business performance. In addition, the average comparative analysis between the 4th Industrial Revolution Enterprises and the non-4th Industrial Revolution Enterprises confirmed that the 4th Industrial Revolution Enterprises conducted higher values in the business performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.701-707
• /
• 2016

Indigenous species are needed for more accurate toxicity assessments in tropical regions. Thus, we determined not only the optimum culture conditions for stable maintenance of Nitocra sp. isolated from tropical regions but also the availability of copepods for marine ecotoxicological evaluation. Experiments on temperature, salinity, and diet as factors for optimum culture conditions as well as acute and chronic toxicity tests for ecotoxicological assessment were carried out. Data on optimum culture conditions were analyzed for statistically significant observations using one-way analysis of variance (ANOVA). Optimum temperature and salinity for Nitocra sp. were $29^{\circ}C$ and 24~39‰, and Nitocra sp. fed Tetraselmis suecica had relatively faster development and higher survival than other microalga. Under optimum culture conditions, toxicity tests were carried out. The $LC_{50}$ level and NOEC (no observed effect concentration) levels of copper and arsenic were calculated in the acute toxicity test. In the chronic test of Cu and As, developmental time and survival traits were usable endpoints for toxicity assessments. As a result, tropical copepod Nitocra sp. seems to be a potential candidate organism for marine ecotoxicological evaluation.

• Progress in Medical Physics
• /
• v.24 no.1
• /
• pp.68-75
• /
• 2013

The purpose of this research is to compare and analyze $SUV_{LBM}$-maximum of normal regions using VOI (the volume of interest) in order to enhance the diagnostic level in whole body images of PET/CT and PET/MRI for 26 health check-up participants. In particular, we try to set up $SUV_{LBM}$-maximum data that can be used in synchronous evaluation for PET/CT and PET/MRI without contrast media. The evaluation of $SUV_{LBM}$-maximum for normal regions of whole body PET/CT and whole body PET/MRI shows that the image of PET/MRI differs very significantly from the reference image of PET/CT (p<0.0001). However, they exhibit high correlations in view of statistics (R>0.8). From this research, we suggest that the decision in the evaluation of $SUV_{LBM}$-maximum for PET/MRI should be made with the reduction of about 26.3%, while one should decide with the reduction of about 29.3% when the contrast media is used. It is helpful to interpret all image of PET/CT and PET/MRI using $SUV_{LBM}$-maximum for convenience and efficiency.

• Korean Journal of Food Science and Technology
• /
• v.42 no.4
• /
• pp.377-382
• /
• 2010

This study was conducted to establish a method to analyze biurea decomposed from azodicarbonamide in processed foods such as wheat flour and bread. New method was developed using high performance liquid chromatography mass/mass spectrometry to determine biurea in wheat flour and bakery products. The recovery rate was 94.3-112.5%. The limit of detection for biurea was 0.003 mg/kg, and the limit of quantification was 0.01 mg/kg. The monitoring results for biurea content using established methods showed that biurea was detected at 2.76 mg/kg in the azodicarbonamide-detected flour (detection rate, 2%). The detection rate in processed foods such as baked goods was 27% (16/59). The detection range was 0.19-18.01 mg/kg (average, 3.79 mg/kg). However, it was thought that the detection level was safe due to much lower values than the standard (45 mg/kg). As a result, the newly established biurea analytical method will contribute to the management of azodicarbonamide in processed foods such as wheat flour and bakery products.

• Journal of Wetlands Research
• /
• v.16 no.1
• /
• pp.113-124
• /
• 2014

The observed rainfall may be different along with the altitude of rain gauge, resulting in the fact that the characteristics of rainfall events occurred in urban or mountainous areas are different. Due to the mountainous effects, in higher altitude, the uncertainty involved in the rainfall observation gets higher so that the density of rain gauges should be more dense. Basically, a methodology for the rain gauge network evaluation, considering this altitude effect of rain gauges can account for the mountainous effects and becomes an important step for forecasting flash flood and calibrating of the radar rainfall. For this reason, in this study, we suggest a methodology for rain gauge network evaluation with consideration of the rain gauge's altitude. To explore the density of rain gauges at each level of altitude, the Equal-Altitude-Ratio of the density of rain gauges, which is based on the fixed amount of elevation and the Equal-Area-Ratio of the density of rain gauges, which is based on the fixed amount of basin area are designed. After these two methods are applied to a real watershed, it is found that the Equal-Area-Ratio generates better results for evaluation of a rain gauge network with consideration of rain gauge's altitude than the Equal-Altitude-Ratio does. In addition, for comparison between the soundness of rain gauge networks in other watersheds, the Coefficient of Variation (CV) of the rain gauge density by the Equal-Area-Ratio is served as the index for the evenness of the distribution of the rain gauge's altitude. The suggested method is applied to the five large watersheds in Korea and it is found that rain gauges installed in a watershed having less value of the CV shows more evenly distributed than the ones in a watershed having higher value of the CV.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.535-541
• /
• 2020

A conventional elastic material replacement and performance evaluation are very complicated and time-consuming, and it is difficult to know when to replace the elastic material in advance. By comparing with the product limit and the functional limit, the necessity of elastic material replacement and the improvement of track support stiffness according to replacement can be immediately demonstrated based on experimental data. Using an evaluation system of track support stiffness, the performance evaluation data for elastic materials obtained through field tests using software for track support stiffness is integrated and managed on the administrator's computer. Therefore, the replacement plan is established and maintenance history is managed by identifying the replacement time and location of elastic materials. It is possible to evaluate the performance and condition of the elastic material at the various points during the working time of the track inspection and the track performance (track support stiffness) and durability of the elastic material (aging level, spring stiffness variation rate, etc.) at the operation condition. The elastic material could be replaced timely, and the deterioration of the elastic material can be continuously monitored.

• Korean Journal of Food Science and Technology
• /
• v.44 no.6
• /
• pp.666-672
• /
• 2012

The present study was carried out in order to assess the dietary exposure as well as the risk for lead (Pb) and cadmium (Cd) exposure through mushrooms among the Korean population. Various samples (n=536) covering 17 kinds of mushrooms were collected from retail outlets and markets in Korea. The contents of Pb were 0.005 (King oyster)-0.026 (Matsutake) mg/kg in raw mushrooms and 0.014 (Oyster)-16.411 (Manna lichen) mg/kg in dry mushrooms, respectively. The contents of Cd were 0.002 (Enoki)-0.205 (Hericium erinaciium) mg/kg in raw mushrooms and 0.021 (Vegetable worms)-2.650 (Agaricus blazei Muill) mg/kg in dry mushrooms, respectively. The mean dietary exposure of Pb for the general population was $0.053{\mu}g/day$, taking 0.03% of provisional tolerable weekly intake (PTWI). The mean dietary exposure of Cd for the general population was $0.168{\mu}g/day$, corresponding to 0.37% of provisional tolerable monthly intake (PTMI). Therefore, the level of the overall dietary exposure to heavy metals through mushroom for the Korean population was far below the recommended JECFA levels, indicating little possibility of concern.

• 대한공업교육학회지
• /
• v.40 no.2
• /
• pp.239-258
• /
• 2015

The purpose of this study is to provide basic data that can be used in a reasonable assessment of the learning outcomes of STEAM. It presented a learning outcome evaluation method, relative weights of key competencies standard that a learner should cultivate. For this study, a pairwise comparison questionnaire about the key competencies was conducted on the STEAM professionals, and AHP was applied to analyze the priority of main factors of key competencies. The results of this study are as follows. First, the importance of capabilities of convergence accomplishment and capabilities of convergent cognition, in the first layer of key competencies, were 39.4% and 36.8%, respectively. In the education evaluation of the STEAM, capabilities of convergence accomplishment and capabilities of convergent cognition showed similar level of importance, and were considered more important factor than capabilities of convergence attitude (23.8%). Second, the relative importance of capabilities of problem solving (20.0%) was highest in the second layer of key competencies, and followed by capabilities of creative thinking (18.3%), responsibility (15.3%), and understanding convergence knowledge (11.0%). Third, it will be a foundation of a competency evaluation, which reasonably evaluates, based on the relative weights, whether to accomplish educational objectives of the STEAM program In addition, this results is expected to become a guide to develop an education program that can improve the teaching and learning process and raise the learning outcome, as well as an education evaluation of the STEAM.