• Journal of Korean Society of Rural Planning
• /
• v.9 no.3 s.20
• /
• pp.41-46
• /
• 2003

The study was focused on setting priority for future core technologies in rural development and resources using AHP. The technologies were derived by Delphi method. Evaluation criteria for the priority setting were decided as 'technology', 'market oriented', and 'public concerns' by council. The future core technologies were divided as four groups by importance and R&D level. Technologies in upper two groups were considered in the study. Group I had high importance and high R&D level. Group II had high importance and lower R&D level. Questionnaires were given to 9 specialists in agricultural resources. As the results, 'public concerns' was decided as a most important evaluation criterion. The most important technologies are "technology developing for animal feces and urine treatment, and restoration it to farm land" in group I, and "technology developing for agricultural by-products as energy source" in group II.

• Journal of information and communication convergence engineering
• /
• v.11 no.3
• /
• pp.167-172
• /
• 2013

Recently, mobile communication systems are suffering from exponentially increasing data traffic. As a promising solution to the increase in data traffic, a coordinated multi-point transmission and reception (CoMP) scheme has been proposed. Although a great deal of research has been done on this new technology, the performance of mobile communication systems with CoMP has not been evaluated properly in a typical indoor environment. To address this, we have developed a system-level simulator and evaluated the performance of mobile communication systems with CoMP. Unlike previous works, we have used an actual antenna pattern in our simulator and link-level results are properly taken into account through link-level abstraction. By using a system-level simulator, we have evaluated the performance of mobile communication systems with CoMP in an indoor environment and found that unlike an outdoor cellular environment, CoMP may not improve the performance of overall mobile communication systems in an indoor environment.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.8
• /
• pp.271-276
• /
• 2014

This study analyzed that N/A check items affect the results of the security level degree, when performing vulnerability analysis evaluation. For this, we were used vulnerability analysis evaluation range, check items and quantitative calculation method. Furthermore, were applied grade and weight for the importance of the items. In addition, because technology develop rapidly, the institution is always exposed risk. therefore, this study was carried out empirical analysis by applying RAL(Risk Acceptabel Level). According to the analyzed result N/A check items factors affecting the level of security has been proven. In other words, this study found that we shall exclude inspection items irrelevant to the institution characteristics, when perform vulnerability analysis evaluation. In this study suggested that security level evaluation shall performed, after that exclude items irrelevant to the institution characteristics based on empirical verification. And also, it proposed that model research is required for establish check items for which analysis-evaluate vulnerability based on empirical verification.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.599-601
• /
• 2009

In currently being adopted as a e-leaning standard, SCORM it is difficult to provide the customized contents to a learner by changing the learner's level at runtime, and to control selective studying. So, we designed and implemented the customized contents organization engine(CCOE) in order to complement SCORM's faults in this paper. The CCOE consists of a level evaluation module, a contents re-organization module and a question item selection module. A level evaluation module evaluates the learner's level based on a question item reaction theory. And a question item selection module selects some random items by each level or by considering the learner's level which is then provided to a studying before evaluation, a section evaluation, and a quiz. And then this module transmits the selected items to the contents reorganization module for providing the quiz. A contents re-organization module selects the customized contents based on the learner's level by searching the tagged difficulty to the content, and creates the sequence with the selected items and the transmitted items from the question item selection module. If proposed in this paper CCOE is applied, the higher effectiveness of learning is expected by providing the customized learning contents based on the re-evaluated learner's level by each section.

• Journal of Korea Technology Innovation Society
• /
• v.2 no.2
• /
• pp.249-265
• /
• 1999

This study examines the efficiency of engineering education using DEA(data envelopment analysis) which is often used in the efficiency evaluation of public services. We evaluate 27 mechanical engineering departments according to academy-basis, general basis, and employment-basis considering students' academic level and input costs as input factors. Our empirical results suggest that an evaluation method using DEA can give us useful informations such as benchmarks to improve education specialization where it is desirable, decisions about whether a department should expand its gross input or not, and proper directions about which input factors should be controlled and how much control is needed.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.59-64
• /
• 2007

This study introduces an environmental noise evaluation procedure and results for a wind turbine (W/T) system. Test and evaluation are required by the international standard IEC 61400-11 in the aspect of environmental effect. Test and evaluation are performed on U-50 WT model which is first developed by the domestic W/T manufacturer. W/T test model is under operation in Daekwanryung wind test site. An integrated monitoring system in the test site is utilized for the evaluation. With the noise signal, meteorological data and W/T operational data are monitored in real time by the integrated monitoring system using LabVIEW. From the measured noise data, acoustic power level are estimated and compared with those of other similar size WT under the wind speeds required by international standard.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.3
• /
• pp.263-269
• /
• 2017

The mineral contents, and free amino acid, and fatty acid composition of rack and bag or suspended cultured oysters Crassostrea gigas were compared. The moisture content did not change much from 82.8% to 86.3% in the different culture methods. The glycogen level was low 4.7% during rack and bag culture but high 7.2% during suspended culture. The sodium level was the highest during suspended culture, while copper and zinc level were highest during rack and bag culture. The taurine level was 1,385-1,375 mg/100 g in oyster cultured using the rack and bag method, but that in the market sample was lowest at 1,015.8 mg/100 g. Hydroxyproline, glutamic acid, proline, glycine, and alanine were detected at high levels in the experimental oysters. The polyunsaturated fatty acid content was similar among samples. The docosahexaenoic acid level was 14% with rack and bag culture and 12% with suspended culture, whereas the eicosapentaenoic acid level was 15% with rack and bag culture and 20% with suspended culture. The atherogenic index (AI), thrombogenicity index (TI), and hypocholesterolemic/ hypercholesterolemic (h/H) ratio were important factors in the nutritional evaluation. The AI and TI values were 0.5-0.2, and the h/H ratio were 2.0 and 2.4 with the rack and bag and suspended culture, respectively.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.4
• /
• pp.229-236
• /
• 2005

This paper presents a system level architecture evaluation technique that leverages transaction level modeling but also significantly extends it to the realm of system level performance evaluation. A major issue lies with the modeling effort. To reduce the modeling effort the proposed technique develops the concept of worst case scenarios. Since the memory controller is often found to be an important component that critically affects the system performance and thus needs optimization, the paper further addresses how to evaluate and optimize the memory controllers, focusing on the test environment and the methodology. The paper also presents an industrial case study using a real state-of-the-art design. In the case study, it is reported that the proposed technique has helped successfully find the performance bottleneck and provide appropriate feedback on time.

• Journal of Intelligence and Information Systems
• /
• v.27 no.1
• /
• pp.1-21
• /
• 2021

As the global business environment changes, uncertainties in technology development and market needs increase, and competition among companies intensifies, interests and demands for R&D activities of individual companies are increasing. In order to cope with these environmental changes, R&D companies are strengthening R&D investment as one of the means to enhance the qualitative competitiveness of R&D while paying more attention to facility investment. As a result, facilities or R&D investment elements are inevitably a burden for R&D companies to bear future uncertainties. It is true that the management strategy of increasing investment in R&D as a means of enhancing R&D capability is highly uncertain in terms of corporate performance. In this study, the structural factors that influence the R&D capabilities of companies are explored in terms of technology management capabilities, R&D capabilities, and corporate classification attributes by utilizing data mining techniques, and the characteristics these individual factors present according to the level of R&D capabilities are analyzed. This study also showed cluster analysis and experimental results based on evidence data for all domestic R&D companies, and is expected to provide important implications for corporate management strategies to enhance R&D capabilities of individual companies. For each of the three viewpoints, detailed evaluation indexes were composed of 7, 2, and 4, respectively, to quantitatively measure individual levels in the corresponding area. In the case of technology management capability and R&D capability, the sub-item evaluation indexes that are being used by current domestic technology evaluation agencies were referenced, and the final detailed evaluation index was newly constructed in consideration of whether data could be obtained quantitatively. In the case of corporate classification attributes, the most basic corporate classification profile information is considered. In particular, in order to grasp the homogeneity of the R&D competency level, a comprehensive score for each company was given using detailed evaluation indicators of technology management capability and R&D capability, and the competency level was classified into five grades and compared with the cluster analysis results. In order to give the meaning according to the comparative evaluation between the analyzed cluster and the competency level grade, the clusters with high and low trends in R&D competency level were searched for each cluster. Afterwards, characteristics according to detailed evaluation indicators were analyzed in the cluster. Through this method of conducting research, two groups with high R&D competency and one with low level of R&D competency were analyzed, and the remaining two clusters were similar with almost high incidence. As a result, in this study, individual characteristics according to detailed evaluation indexes were analyzed for two clusters with high competency level and one cluster with low competency level. The implications of the results of this study are that the faster the replacement cycle of professional managers who can effectively respond to changes in technology and market demand, the more likely they will contribute to enhancing R&D capabilities. In the case of a private company, it is necessary to increase the intensity of input of R&D capabilities by enhancing the sense of belonging of R&D personnel to the company through conversion to a corporate company, and to provide the accuracy of responsibility and authority through the organization of the team unit. Since the number of technical commercialization achievements and technology certifications are occurring both in the case of contributing to capacity improvement and in case of not, it was confirmed that there is a limit in reviewing it as an important factor for enhancing R&D capacity from the perspective of management. Lastly, the experience of utility model filing was identified as a factor that has an important influence on R&D capability, and it was confirmed the need to provide motivation to encourage utility model filings in order to enhance R&D capability. As such, the results of this study are expected to provide important implications for corporate management strategies to enhance individual companies' R&D capabilities.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.1
• /
• pp.131-138
• /
• 2023

This study started with questioning the fact that in the assessmentof technology, which has taken place every two years since 2010, the technology gap in the most technologically advanced countries was evaluated as 4-5 years in each evaluation. To interrogate this question, regression estimation was performed using the Gompertz model based on time series data for technology level evaluation. As a result, it would take 17 years for high-speed rail vehicle technology to reach the level of 95 % of the country with the highest technology, and 72 years to reach the level of 100 %. Recognizing the technology gap is important in establishing a technology catchup strategy. A collaborative technology catchup strategy is the best strategy for moving to an original technology development stage while competing with large global leaders without much domestic market demand. This can occur regardless of where Korea is located in the technology catchup stage.