• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.5 no.3
• /
• pp.291-299
• /
• 2015

With recent surge of attention to heating and air conditioning energy consumption, the need for evaluating performance of heating and air conditioning energy is also on the rise. This research aims to propose daily-life based evaluation method as an alternative to existing one, as well as to apply the method in real life to prove its validity. The results are as following. 1) I studied temperatures preferred by persons indoors and appropriate level of temperature, and the results show that properties of such persons such as age is directly linked with pleasantness of the room, but the issue lies with the fact that such properties are not considered in existing performance evaluation of heating and air conditioning. 2) Daily life based evaluation proposed herein reflects such properties of persons indoors. It controls heating / air conditioning devices installed in the test bed with the same size as a real life room to get quantitative and visual performances in our daily life as well as simple temperature information. 3) To verify validity of daily life based evaluation, I conducted different evaluation sessions with and without a blind and also based on ages of persons indoors. Results based on properties of persons showed difference of 77.6%, leading to effective analysis of energy consumption pattern by heating / air conditioning devices. This research takes significance in that it comes with a new performance evaluation method based on real life, and I gather that further studies are required to develop more multilateral performance evaluation in order to verify and improve technology for reduction of energy consumption.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.541-550
• /
• 2024

The aim of this study is to find a way to improve the effectiveness of feedback that can contribute to the development of government work evaluation through comparison of systems between Korea and the United States. To this end, this study compared and analyzed the cases of Korea and the United States in relation to the feedback system of political affairs evaluation. In the case of the United States, it was confirmed that it was linked to a relatively high level of the learning dimension of the feedback system of achieving and improving policy goals, while in Korea, such linkage was segmented and controlled. In the case of Korea, it was confirmed that the government work evaluation system was in power, and its purpose was to improve policies and to control the evaluation target rather than learning for it. In the case of the United States, it is noteworthy that the autonomy of its own ministries is guaranteed as much as possible, the clarity and achievement of the goals presented by the ministries are prioritized, and the feedback also has a support and learning system as a regular system, not an ex post system. It is necessary to focus on policy improvement that can be linked to the achievement of policy goals in government work evaluation. It is also necessary to take a quarterly monitoring system, but to transform the ex post evaluation system into a learning and supportive system that can achieve policy goals, not control.

• International Journal of Quality Innovation
• /
• v.9 no.1
• /
• pp.22-40
• /
• 2008

Unnatural working postures usually cause musculoskeletal problems for workers in work field, especially in traditional industry. Many analysis and survey methodologies have been developed to identify unnatural postures and disorder risks in workplaces. The Ovako Working Posture Analyzing System (OWAS) and Nordic Musculoskeletal Questionnaire (NMQ) are the representative methods and applied widely. This study applied the both tools to investigate the work field of a manufacturing factory of the water heater's case. We divided the manufacturing process into nine workshops, took the pictures of working motions by DV camera and analyzed the postures on OWAS. From the OW AS results, we could identify the risks level of musculoskeletal symptoms as four Action Categories (AC). And from the comparison of OWAS and NMQ results, we could provide the suggestions to improve the working methods and environment. From the results of OWAS, we found that the operators' head/neck and back were above AC3 in some workshops. If the situation continued in long period, the operators might have the risk to get musculoskeletal symptoms. From the investigation of NMQ, we also found that the percentage of aches on neck, shoulders and lower back were higher than other parts of body. The correlation between aches and jobs was more than 75%. So we provided some suggestions to improve: work rotation and adjustment of work surface/height to fit in with Ergonomics. Then the risks of musculoskeletal symptoms would be reduced.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.12
• /
• pp.5231-5248
• /
• 2016

As a service-oriented paradigm, web service composition has obtained great attention from both academia and industry, especially in the area of cloud service. Nowadays more and more web services providing the same function but different in QoS are available in cloud, so an important mission of service composition strategy is to select the optimal composition solution according to QoS. Furthermore, the selected composition solution should satisfy the service level agreement (SLA) which defines users' request for the performance of composite service, such as price and response time. A composite service is feasible only if its QoS satisfies user's request. In order to obtain composite service with the optimal QoS and avoid SLA violations simultaneously, in this paper we first propose a QoS evaluation method which takes the SLA satisfaction into account. Then we design a service selection algorithm based on our QoS evaluation method. At last, we put forward a parallel running strategy for the proposed selection algorithm. The simulation results show that our approach outperforms existing approaches in terms of solutions' optimality and feasibility. Through our running strategy, the computation time can be reduced to a large extent.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.81-87
• /
• 2014

In this study, along with the expansion of the national R&D projects, by analyzing the case of K research center of Land and Transport R&D projects, and was evaluated in the value of technology. The evaluation of the value of technology, were analyzed using the SMART3 targeting patents K research center indicate best technical aspects have registered. Analysis technical value of research center K, was found to have maintained the same level as the average of about of Land and Transport R&D projects. The significance of this study is that it was approached by more concrete approach of valuation of technology principle of national R&D projects. We expect that the study of evaluation method and diverse objective to achieve the intended purpose of the national R&D projects are carried out more.

• Fire Science and Engineering
• /
• v.28 no.4
• /
• pp.81-88
• /
• 2014

This study identified the complaint ratio of musculoskeletal symptom by 119 EMTs and investigated the work risk extent through ergonomics evaluation about the patient transport works, which cause work-related musculoskeletal disorders (WMSDs) to 119 EMTs. For this, the complaint ratio of musculoskeletal symptom utilized questionnaire tool based on KOSHA Code H-30-2008 and the risk extent about the patient transport work evaluated by using ergonomics evaluation tools such as OWAS, RULA and REBA. According to the study result, 60.9% of 119 EMTs experienced musculoskeletal symptom. Among them, the symptom on back was the most common (36.1%). The work, which mostly causes WMSDs, has been found as patient transport work (48.4%). Among the patient transport motion, loading/unloading of ambulance cot to/from ambulance and the lifting of patient by stretcher were OWAS risk-level 3 and RULA/REBA risk-level 3 to 4. Among the patient transport environment, carrying patient on stairway using emergency mini-stretcher, moving patient in vehicle using spine board and piggy-back carrying or cradle carrying patient on stairway or slope way were OWAS, RULA, REBA risk level 3 to 4. It is suggested that immediate improvement in work postures for these works should contribute to prevention against WMSDs to 119 EMTs.

• Analytical Science and Technology
• /
• v.31 no.1
• /
• pp.14-22
• /
• 2018

After signing the WHO FCTC in 2003, South Korea ratified the FCTC in 2005. This study was conducted to provide data on toxic constituents that can be used as useful information for the level of exposure to Korean smokers. Emissions data from five brands of cigarettes were tested under the ISO and "Canadian Intense (HCI)" smoking regimes, respectively. We conducted an analysis of 25 compounds containing nicotine, tar, carbonyls, phenolics, volatile organic compounds (VOCs), and semi-VOC cigarette smoke. Tar and nicotine showed levels of 4.3 to 5.8 mg/cig and 0.4 to 0.5 mg/cig, respectively, which are within the range of tolerance presented in ISO 8243. In the case of carbonyls, formaldehyde was detected within a range of 8.2 to $14.3{\mu}g/cig$, and acetaldehyde was present within a range of 224.7 to $327.2{\mu}g/cig$ under the ISO smoke regime. Crotonaldehyde was not detected under the ISO regime, and all of the carbonyls showed values 2.3 to 4.5 times higher under the HCI regime than those under the ISO regime. Catechol, which showed a level of 47.0 to $80.5{\mu}g/cig$ under the ISO regime and 117.5 to $184.7{\mu}g/cig$ under the HCI regime, was the highest constituent among the phenols. The amount of isoprene was 91.7 to $158.3{\mu}g/cig$ under the ISO regime and 221.0 to 377.0 under the HCI regime. To summarize, most of the constituents showed a tendency to be detected at levels 2 to 4 times higher under the HCI regime than under the ISO regime. Above all, these results represent the first analysis in Korea from an independent institute of tobacco companies under accreditation of ISO 17025.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.228-240
• /
• 2022

A comprehensive safety management system will be required in accordance with the implementation of the Major Disaster Punishment Act for close-up safety management of construction sites. Safety management level evaluation management requires a comprehensive relationship between safety management under the Construction Technology Promotion Act and health and health management system under the Industrial Safety and Health Act. Purpose: Safety under the Serious Accidents Punishment Act. The ultimate goal is to study the comprehensive analysis and relationship of health management and to improve the safety evaluation level of health and health management. Methods: The feasibility of the questionnaire was confirmed through the second Delphi analysis of construction site experts and safety managers, and the regression coefficient and path analysis of potential variants in safety management, safety management, health management and safety inspection were confirmed. Result and Conclusion: In the structural model, the regression coefficient (89%) from safety management, health system, and safety management to safety inspection execution and lambda values of appropriate observation variables were confirmed. In the path analysis, the total effect (.809) was confirmed by mediating health hygiene in the relationship between health plan establishment adequacy and post-inspection management, and the path coefficient (.82) of temporary structure safety was confirmed.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.235-242
• /
• 2021

Unmanned Aerial Vehicles (UAVs), which were used for military purposes, are gradually expanding their application fields under the influence of electrification and digitalization. Starting from the field of aerial imaging and Intelligence Surveillance and Reconnaissance (ISR) mission, nowadays the possibility of Urban Air Mobility (UAM), which transports passengers and cargo with drones, is widely under discussion. In order to occupy the rapidly growing global unmanned aerial vehicle market in advance, it is necessary to secure core technologies and develop key UAVs components based on the new technologies. In the navigation field, it is necessary to secure a precise position with guaranteed reliability and continuity, unrelated to the operating environments. The reliability and continuity should be secured in the algorithm level and in the H/W component levels also. In order to achieve this technical goal, the Ministry of Science and ICT has launched the 'Unmanned Vehicle Core Technology Research and Development Program' in 2019 to support the R&D on the unmanned vehicle technologies. In this paper, authors introduce the unmanned vehicle core technology research and development program to the related researchers. The authors summarize the backgrounds of the program and show the technological tasks and objectives on the sub-programs in the unmanned vehicle navigation program. We present the program schedules especially focused on the test and evaluation of the developed technologies and components.

• Geomechanics and Engineering
• /
• v.32 no.2
• /
• pp.233-244
• /
• 2023

With the increasing amount of resources required by the society development, mining operations go deeper, which raises the requirements of studying the effects of temperature on the physical and mechanical properties of coal and adjacent rock. For now, these effects are yet to be fully revealed. In this paper, a mechanical-electromagnetic radiation (EMR) test system was established to understand the mechanical deterioration characteristics of coal by the effect of thermal treatment and its deformation and fracture characteristics under thermo-mechanical coupling conditions. The mechanical properties of high-temperature-treated coal were analyzed and recorded, based on which, reasons of coal mechanical deterioration as well as the damage parameters were obtained. Changes of the EMR time series under unconstrained conditions were further analyzed before characteristics of EMR signals under different damage conditions were obtained. The evolution process of thermal damage and deformation of coal was then analyzed through the frequency spectrum of EMR. In the end, based on the time-frequency variation characteristics of EMR, a method of determining combustion zones within the underground gasification area and combustion zones' stability level was proposed.