• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.4
• /
• pp.22-32
• /
• 2000

Development of index for evaluation of environmental nature and its application for the purpose of construction of industrial complex with environmentally friendly. Industrial complex comes to be recognized as a disgusting zone according to the increasing environment consciousness of residents. And the objection about the exploitation of geographically unwanted land site is increased during development process and it is possible to cause Nimby phenomenon. Therefore, ecology and environment-oriented strategies tends to be adopted for industrial complex development. Furthermore, the maximization of profit mainly directed by enterprises as of today cannot guarantee its future and the efforts of adopting environmental constancy and harmony as a new objective are made progressively. For the development of city and region, in particular such as residence complex, farming and special city, the discussion of environmental consistency, new paradigm with environmentally friendly is briskly under progress, but the relevant discussion for the development of industrial estate is not done so much. Just only few studies are realized from the viewpoint of industrial ecology but its level remains in the understanding of the concepts and presentation of development direction. This study is to prepare for the foundation of the construction of industrial estate with environmentally friendly under the current condition of Korea against coming future environment era and to try to develop of evaluation range and index which are the basis of evaluation of environment. I applied the above evaluation index to the residents of actual industrial estate to understand their consciousness of decreased environment. And I obtained 7 evaluation ranges and 37 evaluation indexes for the relevant residents. Among them, I get the value less than the average in 19 index items. And they represent very sensible reaction about environment pollution including decrease of waste materials. This study has several limits but is meaningful in that the development of evaluation index for environmental nature in industrial complex is done, and that the basic discussion of the plan and design for environmentally friendly industrial estate is made under the above evaluation and that 37 evaluation items are applied to the reality.

• Journal of Radiation Protection and Research
• /
• v.29 no.1
• /
• pp.41-48
• /
• 2004

A safety assessment code, called SAGE (Safety Assessment Groundwater Evaluation), has been developed to describe post-closure radionuclide releases and potential radiological doses for low- and intermediate-level radioactive waste (LILW) disposal in an engineered vault facility in Korea. The conceptual model implemented in the code is focused on the release of radionuclide from a gradually degrading engineered barrier system to an underlying unsaturated zone, thence to a saturated groundwater zone. The radionuclide transport equations are solved by spatially discretizing the disposal system into a series of compartments. Mass transfer between compartments is by diffusion/dispersion and advection. In all compartments, radionuclides ate decayed either as a single-member chain or as multi-member chains. The biosphere is represented as a set of steady-state, radionuclide-specific pathway dose conversion factors that are multiplied by the appropriate release rate from the far field for each pathway. The code has the capability to treat input parameters either deterministically or probabilistically. Parameter input is achieved through a user-friendly Graphical User Interface. An application is presented, which is compared against safety assessment results from the other computer codes, to benchmark the reliability of system-level conceptual modeling of the code.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2007.04a
• /
• pp.37-47
• /
• 2007

Factor : Structure Metal pad & SMO size Board level TC test : - Large SMO size better Board level Drop test : - Large SMO size better Factor : Structure Substrate thickness Board level TC test : - Thick substrate better Board level Drop test : - Substrate thickness is not a significant factor for drop test Factor : Material Solder alloy Board level TC test : - Not so big differences over Pb-free solder and NiAu, OSP finish Board level Drop test : - Ni/Au+SAC105, CuOSP+LF35 are better Factor : Material Pad finish Board level TC test : - NiAu/NiAu is best Board livel Drop test : - CuOSP is best Factor : Material Underfill Board level TC test - Several underfills (reworkable) are passed TCG x500 cycles Board level Drop test : - Underfill lots have better performance than non-underfill lots Factor : Process Multiple reflow Board level TC test : - Multiple reflow is not a significant actor for TC test Board level Drop test : N/A Factor : Process Peak temp Board level TC test : - Higher peak temperature is worse than STD Board level Drop test : N/A Factor : Process Stack method Board level TC test : - No big difference between pre-stack and SMT stack Board level Drop test : - Flux dipping is better than paste dipping but failure rate is more faster

• Journal of Information Technology Services
• /
• v.13 no.4
• /
• pp.169-188
• /
• 2014

Recently the complexity and difficulty of the IT projects are increasing due to technological and environmental risks, resulting in the adoption of PMO(Project Management Office) onto IT project management practices, including public area projects. For example, the Korean government regulated the application of PMO onto large scale public IT projects. However, since there has been no reliable method to estimate the cost to execute PMOs, a PMO cost evaluation model to support the budget and cost planning of PMO projects is required. Thus, the purpose of this research is to develop a systematic cost evaluation model for PMO projects. We identified the dimensions that determine the PMO execution cost to be the scale of the subject project, the technical difficulty level of the subject project, and the tasks to be executed in the PMO project. Based on the determinants, the PMO execution cost model were developed from historical data and experts opinion. Upon verification, the validity of the developed model has high level of consistency compared with their experiences of real PMO project costs.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.475-479
• /
• 2010

For a rational evaluation of the spatial distribution of consolidation settlement, it is necessary to adopt probabilistic method. In this study, mean and standard deviation of consolidation settlement of whole analysis region are evaluated by using the spatial distribution of consolidation layer which is estimated from kriging and statistics of soil properties. Using these results and probabilistic method, the area need to be raised the ground level for balancing the final design ground level are determined.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.1002-1008
• /
• 2014

This paper describes insulation design and its reliability evaluation of ${\pm}80kV$ HVDC XLPE cable. Recently, the construction of HVDC transmission system, which is combined overhead line with underground cable, has been completed. This system is installed with existing 154 kV AC transmission line on the same tower. In this paper, the lightning transient analysis is firstly reviewed for selection of basic impulse insulation level and nominal insulation thickness. Then the electrical performance tests including load cycle test and superimposed impulse test based on CIGRE TB 496 are performed to evaluate the reliability of newly designed HVDC cable. There is no breakdown for ${\pm}80kV$ HVDC XLPE cable during electrical performance test. Finally, this system is installed in Jeju island based on successful electrical performance test (Type test). After installation tests are also successfully completed.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.3
• /
• pp.325-332
• /
• 2014

High cognitive workload decreases a driver's ability of judgement and response in traffic situation and could result in a traffic accident. Electrocardiography (ECG) has been used for evaluation of drivers' cognitive workload; however, individual differences in ECG response corresponding to cognitive workload have not been fully considered. The present study developed an evaluation method of individual driver's cognitive workload based on ECG data, and evaluated its usefulness through an experiment in a driving simulator. The evaluation method developed by the present study determined the optimal ECG evaluation condition for individual participant by analysis of area under the receiver operating characteristic curve (AUC) for various conditions (total number of conditions = 144) in terms of four aspects (ECG measure, window span, update rate, and workload level). AUC analysis on the various conditions showed that the optimal ECG evaluation condition for each participant was significantly different. In addition, the optimal ECG evaluation condition could accurately detect changes in cognitive workload for 47% of the total participants (n = 15). The evaluation method proposed in the present study can be utilized in the evaluation of individual driver's cognitive workload for an intelligent vehicle.

• Journal of Information Science Theory and Practice
• /
• v.8 no.2
• /
• pp.68-78
• /
• 2020

This study is a preliminary study to develop an evaluation framework necessary for evaluating the DataON platform. The first objective is to examine expert perceptions of the level of DataON platform construction. The second objective is to evaluate the importance, stability, and usability of DataON platform features over OpenAIRE features. The third objective is to derive weights from the evaluation perspective for future DataON platform evaluation. The fourth objective is to examine the preferences of experts in each evaluation perspective and to derive unbiased evaluation criteria. This study used a survey method for potential stakeholders of the DataON platform. The survey included 12 professionals with at least 10 years of experience in the field. The 57 overall functions and services were measured at 3.1 out of 5 for importance. Stability was -0.07 point and usability was measured as -0.05 point. The 42 features and services scored 3.04 points in importance. Stability was -0.58 points and usability was -0.51 points. In particular, the stability and usability scores of the 42 functions and services provided as of 2018 were higher than the total functions were, which is attributed to the stable and user-friendly improvement after development. In terms of the weight of the evaluation point, the collection quality has the highest weight of 27%. Interface usability is then weighted 22%. Subsequently, service quality is weighted 19%, and finally system performance efficiency and user feedback solicitation are equally weighted 16%.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.6
• /
• pp.27-40
• /
• 2023

This study analyzes the factors affecting the survival of young start-up companies. A youth start-up company was defined as a company with a founder's age under 39. The study was based on evaluation data from 3,540 companies evaluated by the Technology Guarantee Fund to support youth start-up guarantees during the period from 2012 to 2015. In this study, independent variables were defined as founder characteristics, start-up environment, and start-up strategy, and entrepreneurship, knowledge level, and development capabilities were set as variables for start-up characteristics, competition conditions and comparative advantage with alternatives in the start-up environment, and item novelty, commercialization plan and financing plan were set as variables. For variable measurement, the evaluation index of the youth start-up evaluation model of the Technology Guarantee Fund was used. Management performance was defined as the survival of a company, and the survival of 12, 36, 60, and 84 months was measured based on the occurrence of insolvency registered by the Korea Technology Guarantee Fund. The Cox proportional risk model was used for hypothesis testing. As a result of the analysis, knowledge level and development capability were statistically significant in the characteristics of the founder, and the financing plan in the start-up strategy was statistically significant regardless of the survival period. Among the start-up strategies, the novelty of the item had a positive effect on survival after 36 months. Entrepreneurship was significant only in 12-month survival. The most important order for survival was identified in the order of financing plan, knowledge level, item novelty and development capability, of which the founder's knowledge level in the beginning and the funding plan in the second half had the greatest impact.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.1 s.17
• /
• pp.88-98
• /
• 2004

In recent, Information Technology(IT) is the biggest issue on the social whole including the construction industry. IT is recognized as a key strategic means to reinforce competitive power and raise the effectiveness. However, CEOs of each firm have trouble with IT investment decision-making. Because there is neither any case to measure real value of IT nor any confidence to economic effect of information system. IT evaluation is so helpful for most construction firms to make a plan of IT investment. In addition, which will eventually facilitate to achieve their management goal and have the maximum of the firms' value. Therefore, the purpose of this research is to develop IT evaluation system for monitoring IT level continually. And this will be enable a construction company to increase IT investment and improve the level of IT in the construction industry.