• Structural Engineering and Mechanics
• /
• v.6 no.7
• /
• pp.801-815
• /
• 1998

An overview of an analytical model to predict mortar joint failure in unreinforced masonry (URM) structures is presented. The validity of the model is established by comparison with experimental results at element level as well as structure level. This model is then used to study the behavior of URM walls and two commonly used retrofitting schemes. Finally, effectiveness of the two retrofitting schemes in increasing strength and stiffness of existing URM walls is discussed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.132-137
• /
• 2007

The dynamic range of the radar which uses digital signal processors is limited by ADC(Analog-to-Digital Converter). That parameter and ADC loss depend on the noise level of radar receiver. In order to stabilize the performance of radar systems, it is necessary to maintain the noise level constantly. This paper presents the noise AGC(Automatic Gain Control) concept that can keep the noise level constantly and proves that the concept is acceptable through the hardware test and evaluation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1304-1312
• /
• 2008

In this study, the analysis to the preference level on slope measuring instrument of weight values on effect factors find out the reasonable monitoring on slope was performed, in which used AHP(Analytic Hierarchy Process) techniques. The results on professional group, such as the industry, academic, institute and government, analyzed that the very important effect factors, which were indicator of various collapse type, convenience of instrument management, The evaluation of preference level on the slope measuring instrument analyzed the invar wire extensometer which was high level at convenience of install, economical efficiency of install and convenience of instrument management.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.4
• /
• pp.92-97
• /
• 1998

Four urea-formaldehyde (UF) resins were synthesized as a particleboard (PB) binder with the four different initial formaldehyde/urea mole ratio and the final mole ratio of 1.15. The UF resins were characterized according to the standard method of resin adhesive analysis. PBs were manufactured using liquid UF resins at 5 minutes press time and 6% resin solids levels on an ovendry particle weight basis. A total of 20 PBs was fabricated for 5 panel replication per UF resin types. The panels were tested for physical strength properties per the procedure ASTM D 1037. The formaldehyde emission levels from the PBs bonded with the UF resins were tested according to 2-hour desiccator test method ASTM D 5582. There were no significant differences among UF resin types for internal bond strength of PBs. But there were significant differences among UF resin types for formaldehyde emission level of PBs. The results showed that the formaldehyde emission level was influenced by the UF resin types without reducing the adhesive performance.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.4
• /
• pp.291-296
• /
• 2022

Capacitor is one of the reliability-critical components in power converters. The lifetime of the capacitor decreases as the operating temperature increases, and power losses caused by capacitor current are the main cause of the capacitor temperature increase. Therefore, various studies are being conducted to improve the lifetime of the capacitor by reducing the current of DC-link capacitors. In this study, pulse width modulation methods proposed for improving the lifetime of DC-link capacitors of the three-level NPC inverter are comparatively analyzed. The lifetime evaluation of the DC-link capacitor under different modulation methods is performed at component level first and then system level by considering all capacitors by applying Monte Carlo simulation. Furthermore, their effects on the efficiency and THD of the output current are also considered.

• Steel and Composite Structures
• /
• v.50 no.6
• /
• pp.643-658
• /
• 2024

The main aim of this study is to quantify the code seismic design coefficients of the RCS system, which consisted of reinforced concrete columns and steel beams, based on the FEMA P-695 methodology. The underlying intention is to evaluate the seismic performance of the RCS system at the system level rather than the connection level. A set of 24 archetype buildings with a various number of stories, beam span lengths, gravity load levels, and seismic load levels are selected and designed based on the prevailing code requirements. Nonlinear analytical models are developed and validated by experimental tests. The pushover and response history dynamic analyses are conducted to evaluate the required data in the performance quantification process. The results show that the design coefficients suggested by the code are acceptable. However, the level of conservatism is very high. Thus, it is possible to use a larger R-factor in the design process or make some relaxations in the design requirements related to this structural system.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1619-1626
• /
• 2017

Electronic components that are used in high-level radiation environment require a semiconductor device having a radiation-hardened characteristic. In this paper, we proposed a radiation-hardened I-gate n-MOSFET (n-type Metal Oxide Semiconductors Field Effect Transistors) using a layout modification technique only. The proposed I-gate n-MOSFET structure is modified as an I-shaped gate poly in order to mitigate a radiation-induced leakage current in the standard n-MOSFET structure. For verification of its radiation-hardened characteristic, the M&S (Modeling and Simulation) of the 3D (3-Dimension) structure is performed by TCAD (Technology Computer Aided Design) tool. In addition, we carried out an evaluation test using a $Co^{60}$ gamma-ray source of 10kGy(Si)/h. As a result, we have confirmed the radiation-hardened level up to a total ionizing dose of 20kGy(Si).

• Journal of Information Technology Applications and Management
• /
• v.18 no.4
• /
• pp.149-168
• /
• 2011

The current study initiated from an action-plan level perspective of revitalizing Green IT (Information Technology) in Korea by building a standardized national Green IT brand. In order to setting up a national level brand, there should be a big quantitative survey for identifying Green IT brand concepts. For this, the current study provides exploratory research results based on preliminary interviews and literature survey before the quantitative survey. The present article suggests a research framework and describes important factors for setting up a national level Green IT brand. In-depth interviews with panels were executed and existing Green IT brands in other countries are summarized and asked for evaluation to a small number of panels. The research results show that (1) National level Green IT brand should include wider concepts of IT, (2) Green IT brand will be more appealed by the public when it is simple, straightforward, and intuitive, (3) Earth, Tree, and/or Water show higher correlation with Green IT concepts. Green IT brand will offer marketing promotion effects to companies who adopt national level Green IT brand as well as increase public use of Green IT in daily life. For this reason, Green IT brand will be a win-win strategy and this should be cared and executed by the related government agencies with long term perspective.

• Journal of Korean Home Economics Education Association
• /
• v.18 no.3 s.41
• /
• pp.61-79
• /
• 2006

The purpose of this research was to evaluate concretely how the 7th Technology Home Economics(HE) curriculum was operated In school fields by using context evaluation, input evaluation using the CIPP model focusing HE. In this research. a questionnaire survey was done targeting HE teachers in charge of technology and home economics subject for the 7th curriculum implementation at 250 randomly selected middle schools in Gpoungsangnamdo, and 109 returned questionnaire papers were used for the final analysis. The frequency, percent, mean and standard deviation of these data were obtained by using the SPSS 10.0 for Windows Program. The results of this research were outlined below: First, with a regard to the context evaluation (evaluating educational contexts), the requirement degree of seeking for career appeared to be the highest at the requirement survey of the education goal and character of HE area, and the requirement degree of elevating understanding home living' were very low. Interest and concern of students towards these subject as well as the self-confidence of HE teachers in charge were low. Second, as for the input evaluation (evaluating education plans), time allocation, content level, and content amount were not regarded to be not proper, and the composition of HE educational curriculums and the class guideline of teachers also were not so faithful from the aspect of school level. Among surveyed items, establishing plans in school level towards evaluation was relatively sincere, but discussions about curriculums were not so faithful, suggesting various kinds of content are not fully discussed. As shown by the results above, it is difficult to say that the operation of the 7th HE educational curriculums has secured its position perfectly. It is necessary to examine systematically the educational goals. character of the 7th HE educational curriculum and the appropriateness of curriculum content, and to seek various methods to elevate the self confidence of teachers and the interests of students. Because how to operate national level educational curriculums in school levels with self-regulation and elasticity will be an important variable in realizing educational goals, teachers, the main body of educational curriculums and direct performers, should establish and perform educational plans in school levels to elevated the satisfaction of teachers and educational effects for normally operating educational curriculums. In addition, educational curriculums should be operated and evaluated mainly by teachers at school fields to make it possible to confirm and check the achievement of the goals of educational curriculums qualitatively.

• Journal of Korean Association for Spatial Structures
• /
• v.17 no.2
• /
• pp.53-62
• /
• 2017

This study aims to establish a seismic resistance performance evaluation method that makes sure to secure the seismic resistance performance of the existing mid-low story reinforced concrete structures. This study focuses on the development of the seismic resistance performance evaluation method for the overall seismic resistance performance evaluation on the buildings by applying fuzzy theory. This seismic resistance performance evaluation method considers the mutual relations among the type of force, the type of member, the type of story, and the states of deterioration of the buildings. The total seismic resistance performance index from this method was calculated by the intensity weight of each evaluation item, fuzzy measure, fuzzy integration. Moreover, the evaluation methodology was established in this study to identify the performance level of the Immediate Occupancy, Life Safe, Collapse Prevention by applying the fuzzy theory.