• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.419-424
• /
• 1998

Removal of monochloropropanediol (MCPD) and improvement of quality of the soy-sauce made from acid-hydrolyzate of defatted soy protein (SAHSP) were examined by fermenting the soy-sauce with soy-sauce koji or koji plus Pediococcus soya or/and Saccharomyces rouxii. The overall fermentation process performed in this work consisted sequentially of autodigestion of soy-sauce koji $(at\;45^{\circ}C\;for\;12\;days)$, lactic acid fermentation $(at\;30^{\circ}C\;for\;14\;days\;in\;S3\;and\;S4)$, ethanol fermentation $(at\;30^{\circ}C\;for\;14\;days\;in\;S2\;and\;S4)$,and aging $(at\;25^{\circ}C\;for\;20\;days)$. At the end of the autodigestion period, the highest MCPD removal (from the initial 38.6 ppm to 1.3 ppm) was observed in the S-2. Reducing sugar contents of the S-2 and S-4 sharply decreased from the 30th day of incubation, from the initial concentration of about 5.0% to less than 0.5% at the end of the process. Total soluble nitrogen content of all the soy-sauce products slightly increased during the overall fermentating period.The level of free glutamic acid, a major amino acid that is known to determine the taste of soy-sauce was determined to be an average value of $1270{\sim}1323\;mg/100\;mL$ of soy-sauce. The results of sensory evaluation of the fermented SAHSPs show that qualities of the S-2 and S-4 samples are nearly on the same level with that of the commercially fermented soy-sauce (p<0.05). This result suggests that the fermentation process in this work, especially the process performed with S. rouxii has a good effect for removing MCPD from SAHSP and also for improving quality of the SAHSP product.

• The Korean Journal of Malacology
• /
• v.24 no.3
• /
• pp.253-260
• /
• 2008

A total of 15 different residues of polycyclic aromatic hydrocarbons (PAHs) in each 20 samples of Pacific oysters, dried laver and rockfish obtained from seafood markets were analyzed. The prevalence of samples in which more than one PAH residues were found was 75% in oyster, 35% in rock fish hepatopancreas, 0% in rockfish muscle and laver, respectively. To estimate factors contributing to this residue level difference among organisms, tissue concentrations were analyzed after exposing three organisms to phenanthrene, a representative PAH, with concentration of 0.01 or $0.1{\mu}g/mL$ for 2 weeks. Phenanthrene levels after exposure were higher in the oyster digestive gland, laver and rockfish hepatopancreas, but were lower in the oyster whole meat or rockfish muscle. This finding disproved that any close relationship between the residue difference of market samples and concentrating properties of PAHs. The second possible factor analyzed was total lipid contents in the three organisms. Although higher lipid level in hepatopancreas of rockfish may contribute accumulation of PAH residues in the rockfish, lipid factor did not affect to PAH levels in other organism samples. Activity of 7-ethyoxyresorufin-O-deethylase (EROD), a kind of cytochrome $P_{450}$ enzyme, was measured to evaluate the eliminated amount of PAHs through metabolism. The higher EROD activity in rockfish, compared to that in oyster, was likely to contribute to the lower PAH residues in the rockfish. More factors, such as different exposure history, organisms' ability to escape, ingestion through prey organisms, and post-harvest loss, should be studied in the future.

• Journal of radiological science and technology
• /
• v.32 no.4
• /
• pp.361-370
• /
• 2009

The image quality management of bone mineral density is the responsibility and duty of radiologists who carry out examinations. However, inaccurate conclusions due to lack of understanding and ignorance regarding the methodology of image quality management can be a fatal error to the patient. Therefore, objective of this paper is to understand proper image quality management and enumerate methods for examiners and patients, thereby ensuring the reliability of bone mineral density exams. The accuracy and precision of bone mineral density measurements must be at the highest level so that actual biological changes can be detected with even slight changes in bone mineral density. Accuracy and precision should be continuously preserved for image quality of machines. Those factors will contribute to ensure the reliability in bone mineral density exams. Proper equipment management or control methods are set with correcting equipment each morning and after image quality management, a phantom, recommended from the manufacturer, is used for ten to twenty-five measurements in search of a mean value with a permissible range of ${\pm}1.5%$ set as standard. There needs to be daily measurement inspections on the phantom or at least inspections three times a week in order to confirm the existence or nonexistence of changes in values in actual bone mineral density. in addition, bone mineral density measurements were evaluated and recorded following the rules of Shewhart control chart. This type of management has to be conducted for the installation and movement of equipment. For the management methods of inspectors, evaluation of the measurement precision was conducted by testing the reproducibility of the exact same figures without any real biological changes occurring during reinspection. Bone mineral density inspection was applied as the measurement method for patients either taking two measurements thirty times or three measurements fifteen times. An important point when taking measurements was after a measurement whether it was the second or third examination, it was required to descend from the table and then reascend. With a 95% confidence level, the precision error produced from the measurement bone mineral figures came to 2.77 times the minimum of the biological bone mineral density change. The value produced can be stated as the least significant change (LSC) and in the case the value is greater, it can be stated as a section of genuine biological change. From the initial inspection to equipment moving and shifter, management must be carried out and continued in order to achieve the effects. The enforcement of proper quality control of radiologists performing bone mineral density inspections which brings about the durability extensions of equipment and accurate results of calculations will help the assurance of reliable inspections.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.12-17
• /
• 2012

Purpose : The patient's clothes and sheet after radioiodine therapy must be disposed of by related regulation. That must be disposed of as radioactive wastes, but that is reusing after radioactivity decay by keeping for the certain period of time. In general, The minimum storage period calculate by standard of take radioactive substance out of radiation controlled area based on measured surface contamination level. But the measurements of surface contamination level are able to differ by measurement method. In this paper, I wish to calculate the minimum storage period of patient's clothes and sheet after radioiodine therapy by measure nuclide concentration offered by the regulation on self-disposal of radioactive wastes. Materials and Methods : The whole area of patient's clothes and sheet measured 31 patients(male:9 patients, female:22 patients), who had radioiodine therapy(3.7 GBq:13 patients, 5.55 GBq:16 patients, 7.4 GBq:2 patients) from july 2011 to march 2012. The minimum storage period is calculated by the regulation on self-disposal of radioactive waste(100 Bq/g) and standard of take radioactive substance out of radiation controlled area(4 kBq/m2) Results : The minimum storage period of pillow sheet, upper uniform, lower uniform by standard of take radioactive substance out of radiation controlled area were each 4.6 days, 63days, 78 days. The minimum storage period of pillow sheet, upper uniform, lower uniform by the regulation on self-disposal of radioactive waste were each 18.1 days, 43 days, 62 days. Conclusion : We can verify that patient's clothes and sheet after radioiodine therapy exists a great deal of radioactive contamination. The minimum storage period calculation of patient's clothes and sheet is better suited to applying nuclide concentration offered by the regulation on self-disposal of radioactive waste. I recommend, To keep for at least 2 months of the patient's clothes and sheet contaminated radioactivity, for prevent contamination and unnecessary radiation exposure.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.466-472
• /
• 2007

A technology platform for wafer-level three-dimensional integration circuits (3D-ICs) is presented, and that uses wafer bonding with low-k polymeric adhesives and Cu damascene inter-wafer interconnects. In this work, one of such technical platforms is explained and characterized using a test vehicle of inter-wafer 3D via-chain structures. Electrical and mechanical characterizations of the structure are performed using continuously connected 3D via-chains. Evaluation results of the wafer bonding, which is a necessary process for stacking the wafers and uses low-k dielectrics as polymeric adhesive, are also presented through the wafer bonding between a glass wafer and a silicon wafer. After wafer bonding, three evaluations are conducted; (1) the fraction of bonded area is measured through the optical inspection, (2) the qualitative bond strength test to inspect the separation of the bonded wafers is taken by a razor blade, and (3) the quantitative bond strength is measured by a four point bending. To date, benzocyclobutene (BCB), $Flare^{TM}$, methylsilsesquioxane (MSSQ) and parylene-N were considered as bonding adhesives. Of the candidates, BCB and $Flare^{TM}$ were determined as adhesives after screening tests. By comparing BCB and $Flare^{TM}$, it was deduced that BCB is better as a baseline adhesive. It was because although wafer pairs bonded using $Flare^{TM}$ has a higher bond strength than those using BCB, wafer pairs bonded using BCB is still higher than that at the interface between Cu and porous low-k interlevel dielectrics (ILD), indicating almost 100% of bonded area routinely.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.4
• /
• pp.357-368
• /
• 2008

On July 31, 2008, the Government issued the construction and operation permit for the first low and intermediate level radioactive waste disposal facility in the Republic of Korea. In this paper, the fundamental regulatory framework, regulatory requirements and technical standards of the disposal facility are introduced, and the phased review process adopted for evaluation of the safety of the facility is briefly described. The Atomic Energy Act sets forth a stepwise regulatory framework for the whole life-cycle of the disposal facility such as siting, design, construction, operation, closure and institutional control. More detailed regulatory requirements and technical standards are stipulated in the subsequent regulations of the Atomic Energy Act and a series of Notices issued by the Ministry of Eduction, Science and Technology. The Korea Institute of Nuclear Safety, as entrusted by the Ministry under the Atomic Energy Act, conducted safety review on the disposal facility, and evaluated the compliance with relevant criteria in all technical elements(i.e. siting and structural safety, radiological environmental impact, operational safety, systems and components, quality assurance, and total systematic performance assessment, etc.). The overall safety review process can be phased into inception phase, initial review phase, main review phase and completion phase. The review results were reported to and deliberated by the five Sub-committees of the Special Committee on Nuclear Safety, and then reported to the Ministry. The Ministry issued the construction and operation permit of the disposal facility through the deliberation of the review results by the Nuclear Safety Commission. Hereafter, the safety of the repository will be reassured by a series of subsequent regulatory inspections and reviews under the Atomic Energy Act. In addition, the licensee's continuous implementation of the "Safety Promotion Plan" may also enhance the long-term safety of the repository and contribute to build-up the confidence of the safety case.

• Journal of Animal Science and Technology
• /
• v.50 no.4
• /
• pp.499-508
• /
• 2008

This study was conducted to evaluate the effect of bio-starch from corn processing to replace dried whey in weaned pigs. A total of 120 crossbred [(Landrace×Yorkshire)×Duroc] pigs were weaned at 21 days of age weighing 6.01±0.34 kg in average. Five week feeding trial consisted of phase 1(0~2 wks) and phase 2(3~5 wks). Dietary treatments included 1) CON(basal diet), 2) BS5(whey 5%, partial substitution of bio-starch), 3) BS10(whey 10%, partial substitution of bio-starch) and 4) BS15(whey 15%, partial substitution of bio-starch). There were four dietary treatments with six replicate pens per treatment and five pigs per pen. During the overall period, there were no significant differences in the ADG(average daily gain) and gain/feed ratio among the treatments(P>0.05). However, the ADFI(average daily feed intake) was higher in BS5 and BS15 treatments than in CON treatment(P<0.05). At the 2nd week, dry matter and nitrogen digestibility were increased(quadratic effect, P=0.03 and P=0.01, respectively; cubic effect, P<0.001 and P=0.01, respectively) with the highest at 10% of bio-starch inclusion in the diets. At the last week of the experiment, dry matter, nitrogen and energy digestibility were increased(P<0.05) with the highest at 5% of bio-starch inclusion in the diets. At the 2nd week total protein concentration was increased(linear effect, P=0.04; cubic effect, P=0.01) with the highest at 10% of bio-starch inclusion in the diets. Also, BUN(blood urea nitrogen) was increased(linear effect, P=0.01) as the level of bio-starch inclusion increased in the diets. Fecal consistency score was inclined to lowers CON treatment than other treatments. In conclusion, the result of trial indicates that bio-starch can be included at the level of 5~10% of weaning pig diet replacing part of the dried-whey, and digestibilities were positively affected by bio-starch at growth stage.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.5
• /
• pp.67-80
• /
• 2022

This study was conducted to derive policy measures such as fostering and supporting by examining the actual conditions of domestic startups. The subject of this study was the start-ups located in Seongnam-si, where Pangyo Techno Valley, which is the highest-level innovation cluster in Korea and is evaluated as a start-up mecca. Startups were defined as startups under 7 years old based on new technologies such as IT, BT, and CT, and the subjects of the study were selected. This can be seen as a step forward from previous research in that it embodies the concept of a startup that was previously abstract in a quantitatively measurable way. As a result of the analysis, about 94% of startups are distributed in the so-called "Death Valley" growth stage, and startups above scale-up, which means full-scale growth beyond BEP, account for about 6%. appeared to be occupied. He cited the problem of start-up funds as the biggest difficulty in the early stages of startups, and cited the loan evaluation method that prioritizes sales or collateral in raising funds as the biggest problem. In addition, start-ups rated the access to private investment capital such as VC, AC, and angel investors at a low level compared to policy funds, which are public funds. Most startups showed a lot of interest in overseas expansion, and they chose matching overseas investors such as overseas VCs as the biggest support for overseas expansion. The overall competitiveness in the overseas market was 49.6 points, which is less than 50 points out of 100, indicating that the overall competitiveness was somewhat inferior. It was analyzed that public support and investment in overseas sales channels (sales channels, distribution networks, etc.) should be prioritized along with enhancement of technological competitiveness in order for domestic startups to increase their competitiveness in overseas markets as well as in the domestic market.

• Journal of Animal Science and Technology
• /
• v.66 no.5
• /
• pp.962-980
• /
• 2024

Antimicrobial resistance poses challenges to humans and animals, especially to the poultry sector in control of fowl typhoid with antibiotics, leading to increased mortality and food insecurity. Therefore, it is essential to develop more effective medications as alternatives to antibiotics. Currently, zinc oxide and copper oxide nanoparticles are of such significant interest due to their antibacterial properties. This study aimed to evaluate antimicrobial activity of zinc oxide and copper oxide nanoparticles against fowl typhoid in broilers. Ninety broiler chicks were raised under suitable management conditions. On day 10 of age, chicks were divided into six groups: control negative, control positive, T₁, T₂, T₃, and T₄. On day 19 of age, chicks in all groups except control negative were infected with Salmonella gallinarum (0.2 mL, 10⁸ CFU/mL). After appearance of clinical signs, the treatments (Florfenicol; 50 mg/L drinking water [T₁], and zinc oxide + copper oxide nanoparticles; 25 + 10 mg/kg/d [T₂], 37.5 + 15 mg/kg/d [T₃], and 50 + 20 mg/kg/d [T₄]) were administered to chicks. Chicks were sacrificed on 26th and 30th day of age, and samples of blood and tissue were obtained. Hematological analysis with gross and histopathological examination of spleen, thymus and bursa of Fabricius was performed. Results revealed that there was no visible congestion in spleen and thymus of T₃ and T₄ at 11th day post infection. Antibody level against new castle's disease and lymphoproliferative response showed no significant difference in all groups. However, phagocytic response in nanoparticles treated groups exhibited a notable (p < 0.01) distinction compared to control positive. Notably, T₃ demonstrated the highest level of phagocytic activity. Hematological parameters, including lymphocytes, heterophils, eosinophils, and heterophils/lymphocytes ratio in groups T₂, T₃, and T₄, indicated significant (p < 0.01) difference compared to control positive. However, lymphocytes, heterophils, and heterophils/lymphocytes ratio in groups T₂, T₃, and T₄ showed no significant difference when compared to T₁. Nanoparticle treated groups showed decreased (p < 0.01) congestion of spleen and thymus as compared to control positive. Overall, zinc oxide and copper oxide nanoparticles have potential to serve as an alternative to florfenicol in treatment of fowl typhoid.

• Journal of Intelligence and Information Systems
• /
• v.24 no.4
• /
• pp.111-136
• /
• 2018

In this paper, we propose a methodology to extract answer information about queries from various types of unstructured documents collected from multi-sources existing on web in order to expand knowledge base. The proposed methodology is divided into the following steps. 1) Collect relevant documents from Wikipedia, Naver encyclopedia, and Naver news sources for "subject-predicate" separated queries and classify the proper documents. 2) Determine whether the sentence is suitable for extracting information and derive the confidence. 3) Based on the predicate feature, extract the information in the proper sentence and derive the overall confidence of the information extraction result. In order to evaluate the performance of the information extraction system, we selected 400 queries from the artificial intelligence speaker of SK-Telecom. Compared with the baseline model, it is confirmed that it shows higher performance index than the existing model. The contribution of this study is that we develop a sequence tagging model based on bi-directional LSTM-CRF using the predicate feature of the query, with this we developed a robust model that can maintain high recall performance even in various types of unstructured documents collected from multiple sources. The problem of information extraction for knowledge base extension should take into account heterogeneous characteristics of source-specific document types. The proposed methodology proved to extract information effectively from various types of unstructured documents compared to the baseline model. There is a limitation in previous research that the performance is poor when extracting information about the document type that is different from the training data. In addition, this study can prevent unnecessary information extraction attempts from the documents that do not include the answer information through the process for predicting the suitability of information extraction of documents and sentences before the information extraction step. It is meaningful that we provided a method that precision performance can be maintained even in actual web environment. The information extraction problem for the knowledge base expansion has the characteristic that it can not guarantee whether the document includes the correct answer because it is aimed at the unstructured document existing in the real web. When the question answering is performed on a real web, previous machine reading comprehension studies has a limitation that it shows a low level of precision because it frequently attempts to extract an answer even in a document in which there is no correct answer. The policy that predicts the suitability of document and sentence information extraction is meaningful in that it contributes to maintaining the performance of information extraction even in real web environment. The limitations of this study and future research directions are as follows. First, it is a problem related to data preprocessing. In this study, the unit of knowledge extraction is classified through the morphological analysis based on the open source Konlpy python package, and the information extraction result can be improperly performed because morphological analysis is not performed properly. To enhance the performance of information extraction results, it is necessary to develop an advanced morpheme analyzer. Second, it is a problem of entity ambiguity. The information extraction system of this study can not distinguish the same name that has different intention. If several people with the same name appear in the news, the system may not extract information about the intended query. In future research, it is necessary to take measures to identify the person with the same name. Third, it is a problem of evaluation query data. In this study, we selected 400 of user queries collected from SK Telecom 's interactive artificial intelligent speaker to evaluate the performance of the information extraction system. n this study, we developed evaluation data set using 800 documents (400 questions * 7 articles per question (1 Wikipedia, 3 Naver encyclopedia, 3 Naver news) by judging whether a correct answer is included or not. To ensure the external validity of the study, it is desirable to use more queries to determine the performance of the system. This is a costly activity that must be done manually. Future research needs to evaluate the system for more queries. It is also necessary to develop a Korean benchmark data set of information extraction system for queries from multi-source web documents to build an environment that can evaluate the results more objectively.