• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1091-1097
• /
• 2002

In order to improve palatability and quality of traditional kochujang, kiwifruit (Actinidia deliciosa) was added to traditional kochujang fermented for 3 months. Physicochemical and microbial characteristics were investigated during fermentation at $30^{\circ}C$. Moisture contents of all treated kochujangs increased with increasing amount of kiwifruit added during fermentation. pH of kiwifruit-added kochujang was lower than that of the control kochujang, whereas no significant differences in titratible acidity was observed among all treatments. Crude protein and salt contents of kiwifruit-added kochujang were lower than those of the control, whereas no difference in crude fat contents were found. Ethanol and amino-nitrogen contents of 6 and 9% kiwifruit-added kochujang were higher than those of the control. Fructose contents of kiwi-added kochujangs were higher than that of the control. Major organic acids of kochujang were in the order of malic acid > citric acid > succinic acid > acetic acid > lactic acid > oxalic acid. Succinic acid level increased significantly during fermentation and was higher in kiwifruit-added kochujang than in the control. Bacterial cell counts of all treatments were not different, and viable cell count of yeast was slightly higher in kiwifruit-added kochujang only at the initial fermentation period. Sensory evaluation revealed that the addition of 9% kiwifruit was the optimum condition for improving kochujang quality.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.3
• /
• pp.342-351
• /
• 2016

This study was carried out to develop an optimized analytical method using high-performance liquid chromatography (HPLC) applied to canthaxanthin, which is not yet designated as a food colorant in Korea, as well as to perform validation and uncertainty evaluation of this method. Official methods of AOAC, UK, and Japan with HPLC-UV detection were evaluated for the analysis of canthaxanthin by comparison of linearity, resolution, selectivity, limit of detection (LOD), limit of quantitation (LOQ), accuracy, precision, recovery, inter-laboratory tests, and uncertainty measurement. The calibration curves showed high linearity with an $R_2$ value of over 0.999 for canthaxanthin standard solutions in all three official methods. The official method of Japan exhibited the best results in terms of resolution and selectivity, including the lowest LOD and LOQ. The average coefficients of variation were calculated as less than five of three institutes with a precision value less than 1, accuracy near 100%, and recovery ratio between $100{\pm}10%$. The expanded uncertainty for canthaxanthin was estimated to be $39.5{\pm}5.29mg/kg$ (95% confidence level, k=2), and the uncertainty of measurement was 13.4%. In this study, official methods of canthaxanthin were compared and the validities verified. The results will be further applied to establish an authorized analytical method for canthaxanthin in Korea.

• Food Science and Preservation
• /
• v.16 no.4
• /
• pp.463-471
• /
• 2009

We evaluated the physicochemical properties and sensory characteristics of, bioactive compounds in grape juice prepared from different grape varieties grown in Korea, such as Campbell Early, Steuben, and Muscat Bailey A (MBA), with respect to heating time (30, 45, or 60 min) and temperature ($60^{\circ}C$, $70^{\circ}C$, $80^{\circ}C$, or $90^{\circ}C$). We found that long heating time and high temperature, especially treatment at $90^{\circ}C$ for 60 min, significantly affected the physicochemical properties and bioactive compound levels of grape juice. Among the grape juice varieties, Campbell Early juice had the highest level of bioactive compounds. Sensory evaluation scores showed that heating of musts at $80^{\circ}C$ for 30 min was associated with the most preferred sensory attributes for Campbell Early grape juice, whereas the most preferred juices from Steuben and MBA grapes were from musts heated at $70^{\circ}C$ for 60 min and at $70^{\circ}C$ for 30 min, respectively. The bioactive compounds of juice from the three grape varieties were optimal using the above-mentioned processing times and temperatures.

• The Mathematical Education
• /
• v.61 no.2
• /
• pp.287-303
• /
• 2022

The purpose of this study is to draw implications for the improvement in the CSAT by analyzing structures and tasks in the Abitur. To this end, it analyzes the mathematics test system with a focus on the basic and advanced level examination systems, the operator, the using technology, and mathematical formulas. And the characteristics of tasks in the 2021 Abitur were analyzed. As a result of the analysis, first, Germany evaluates whether students have the competency emphasized in the curriculum at Abitur. Second, Germany, which emphasizes the proper use of technology, utilizes both tasks that use technology and those that do not in the Abitur. Third, the Abitur consists of most of the tasks using promised operators and uses various types of operators to present various types of questions to evaluate competence. Fourth, the Abitur includes not only simple structured items consisting of 2-3 subtasks but also tasks dealing in depth with a single situation centered on a big idea. Finally, mathematical justification and proof play an important role in the Abitur. Based on this, some specific measures for improving the CSAT were suggested.

• Journal of Animal Environmental Science
• /
• v.17 no.sup
• /
• pp.61-68
• /
• 2011

To assess the total cost with all stages of facilities, the feasibility of Life Cycle Cost (LCC) analysis was examined in this study to estimate the livestock manure treatment system and optimal decision making process. For the economic evaluation, the plant/equipment investment and annual operation cost of four Public Livestock Recycling Facilities, whose treatment capacity is 100 ton piggery manure per day, was compared. The initial cost was in the range of 2,699 million won to 3,202 million won, where T and E methods were highest and lowest, respectively. The annual operation cost was in the level of 378 million to 498 million won, which decreased in the following order : T method > J method > E method > B method. For the LCC analysis, 4.7% of interest rate, 3.13% of inflation rate, and 1.52% of net discount rate was considered by the data received from Bank of Korea and Statics Korea in the period of 2000 to 2009. Also, for the calculation of present value factor, the durable years of civil engineering & construction, machinery and electric instrument was 30 years, 10 years and 15 years, respectively. Based on these consideration, operation cost was in the range of 17,570 won/ton to 20,661 won/ton, and E method (17,570 won/ton) was economical and B method (20,661 won/ton) was non-economical. Though initial cost of T method was higher than that of B method, LCC analysis of T method was lower than that of T method due to the lower operation cost. Therefore, LCC analysis, which considers both initial cost and operation cost, is more reasonable evaluation method than either initial cost or annual operation cost. For the change of LCC analysis according to the uncertainty, the sensitivity analysis was carried out using fluctuation magnitude of discount rate in the period of 2000 to 2009. As a result, LCC analysis evaluated by discount rate was stable for the uncertain factors since the cost leadership did not change even though the sensitivity analysis varied. In summary, the economic evaluation using LCC analysis could be an efficient reference to choose the suitable livestock manure treatment plants. Furthermore, standardization of statement calculation for the actual cost analysis should be conducted and more detailed study is necessary to validate this summary. Therefore, the application of comprehensive technology evaluation, which considers LCC analysis, should contribute in obtaining objectivity and enhancing reliability for the 'Evaluation of Livestock Manure Treatment System and its Technology'.

• Journal of radiological science and technology
• /
• v.40 no.1
• /
• pp.27-34
• /
• 2017

The author investigated interventional radiology patient doses in several other countries, assessed accuracy of DAP meters embedded in intervention equipments in domestic country, conducted measurement of patient doses for 13 major interventional procedures with use of Dose Area Product(DAP) meters from 23 hospitals in Korea, and referred to 8,415 cases of domestic data related to interventional procedures by radiation exposure after evaluation the actual effectives of dose reduction variables through phantom test. Finally, dose reference level for major interventional procedures was suggested. In this study, guidelines for patient doses were $237.7Gy{\cdot}cm^2$ in TACE, $17.3Gy{\cdot}cm^2$ in AVF, $114.1Gy{\cdot}cm^2$ in LE PTA & STENT, $188.5Gy{\cdot}cm^2$ in TFCA, $383.5Gy{\cdot}cm^2$ in Aneurysm Coil, $64.6Gy{\cdot}cm^2$ in PTBD, $64.6Gy{\cdot}cm^2$ in Biliary Stent, $22.4Gy{\cdot}cm^2$ in PCN, $4.3Gy{\cdot}cm^2$ in Hickman, $2.8Gy{\cdot}cm^2$ in Chemo-port, $4.4Gy{\cdot}cm^2$ in Perm-Cather, $17.1Gy{\cdot}cm^2$ in PCD, and $357.9Gy{\cdot}cm^2$ in Vis, EMB. Dose referenece level acquired in this study is considered to be able to use as minimal guidelines for reducing patient dose in the interventional radiology procedures. For the changes and advances of materials and development of equipments and procedures in the interventional radiology procedures, further studies and monitorings are needed on dose reference level Korean DAP dose conversion factor for the domestic procedures.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.5
• /
• pp.438-444
• /
• 2012

This study was investigated the effect of gamma irradiation (GI) on the shelf-life and quality improvement of squid sundae (a traditional Korean sausage) stored at room temperature after 0 (control), 10 and 20 kGy doses of irradiation. The total viable cells decreased with increasing irradiation dose, and no viable cells were detected with the doses of 20 kGy. There were no significant changes in pH compared to the control. The volatile basic nitrogen (VBN) and thiobarbituric acid reactive substance (TBARS) values of GI (20 kGy) squid sundae were significantly lower than those of the control. In addition, the induction period for the GI (20 kGy) squid sundae measured by the Rancimat method was higher level than that of the control. In a sensory evaluation, there were no significant differences between the control and GI samples during storage.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.4
• /
• pp.140-153
• /
• 2008

The recent stagnation of construction market draw more attention to construction technology development which is believed to be playing a important role in increasing the competitiveness of the construction industry. Thus, increasing pressures has been on the government playing a catalytic role of strengthen technology competitiveness. Hereupon, this study analyzed technology skill evaluation items of the Pre-Qualification system to facilitate construction technology development at the national level and tried to show the correlation between the PQ system and patent application through multilateral analysis of patent applications. Analysis results are intended to provide basic reference in decision-making process related to governmental regulation improvement especially on the PQ system. This research also attempted to draw implications to increase the use of technology related regulations such as patent & utility model based on PQ system analysis results. To do so, a comprehensive trend Analysis on the PQ system has been conducted from the view points of construction technology. Similar analysis has been done with the patent system & Utility model system. Based on Analysis result, implications of regulation improvements was outlined to promote construction technology development, due to eventually increase the competitiveness of Korean construction industry.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.3
• /
• pp.67-79
• /
• 2017

Increasing transportation dependence on the metro system has lead to the convenience of passengers becoming as important as the transportation capacity. In this study, a pedestrian simulator has been developed that can quantitatively assess the pedestrian environment in terms of attributes such as speed and distance. The simulator consists of modules designed for 3D indoor map authoring and algorithmic pedestrian modeling. Module functions for 3D indoor map authoring include 3D spatial modeling, network generation, and evaluation of obtained results. The pedestrian modeling algorithm executes functions such as conducting a path search, allocation of users, and evaluation of level of service (LOS). The primary objective behind developing the said functions is to apply and analyze various scenarios repeatedly, such as before and after the improvement of the pedestrian environment, and to integrate the spatial information database with the dynamic information database. Furthermore, to demonstrate the practical applicability of the proposed simulator in the future, a test-bed was constructed for a currently operational metro station and the quantitative index of the proposed improvement effect was calculated by analyzing the walking speed of pedestrians before and after the improvement of the passage. The possibility of database extension for further analysis has also been discussed in this study.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.1
• /
• pp.55-61
• /
• 2015

When a radiation detector is applied to the measurement of the radioactivity of high-level of radioactive materials or the rapid response to the nuclear accident, several collimators with the different inner radii should be prepared according to the level of dose rate. This makes the in-situ measurement impractical, because of the heavy weight of the collimator. In this study, an IRIS collimator was developed so as to have a function of controlling the inner radius, with the same method used in optical camera, to vary the attenuation ratio of radiation. The shutter was made to have the double tungsten layers with different phase angles to prevent the radiation from penetrating owing to the mechanical tolerance. The performance evaluation through the MCNP code was conducted by calculating the attenuation ratio according to the inner radius of the collimator. The attenuation ratio was marked on the outer scale ring of the collimator. It is expected that when a radiation detector with the IRIS collimator is used for the in-situ measurement, it can change the attenuation ratio of the incident photon to the detector without replacing the collimator.