• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.1-5
• /
• 2001

This paper presents an investigation into the operational comparison of SPOT triangulation to build GCP library by analytical plotter and DPW (digital photogrammetric workstation). GCP database derived from current SPOT images can be used to other image sensors of satellite, if any reasons, such as lack of topographic maps or GCPs. But, general formulation of a photogrammetric process for GCP measurement has to take care of the scene interpretation problem. There are two classical methods depending on whether an analytical plotter or DPW is being used. Regardless of the method used, the measurement of GCPs is the weakest point in the automation of photogrammetric orientation procedures. To make an operational comparison, five models of SPOT panchromatic images (level 1A) and negative films (level 1AP) were used. Ten images and film products were used for the five GRS areas. Photogrammetric measurements were carried out in a manual mode on P2 analytical plotter and LH Systems DPW770. We presented an approach for exterior orientation of SPOT images, which was based on the use of approximately eighty national geodetic control points as GCPs which located on the summit of the mountain. Using sixteen well-spaced geodetic control points per model, all segments consistently showed RMS error just below the pixel at the check points in analytical instrument. In the case of DPW, half of the ground controls could not found or distinguished exactly when we displayed the image on the computer monitor. Experiment results showed that the RMS errors with DPW test was fluctuated case by case. And the magnitudes of the errors were reached more than three pixels due to the lack of image interpretation capability. It showed that the geodetic control points is not suitable as the ground control points in DPW for modeling the SPOT image.

• The Journal of the Korea Contents Association
• /
• v.13 no.4
• /
• pp.389-398
• /
• 2013

This study aims to support rational security investment decision making through prioritizing on operational level of management measures strategically, in carrying out industrial security activities. For this, AHP survey is conducted against industrial security professionals and analyzed. Thereafter, the importance and the priority of industrial security management measures are determined. As a result, in a comparison evaluation among the criteria, 'ICT service management' represents the highest weight (0.54). And the sub-criteria could be divided into three groups (Group I, II, III), depending on their importance. The sensitivity analysis results show that if the weight of the criterion, 'ICT systems/networks access control' is doubled, the sub-criteria, 'O/S access control', 'application access control', and 'wired/wireless network access control' are enter into top rank group. In case of the criterion, 'physical/environmental security' is doubled, the sub-criteria, 'protection zoning/access control' and 'disaster prevention on business equipment/counter-terrorism' are enter into the top rank group, 'securing utilities' is enter into the mid rank group.

• Journal of Convergence for Information Technology
• /
• v.10 no.2
• /
• pp.9-14
• /
• 2020

This study studied on innovation and R&D performance measurement, and especially the dimensions of measuring performance. The Empirical study is based on the opinions of 169 experts from a R&D group with a career for SMBA's support. The results reveal that what the most optimal and appropriate measures of project-level success are will depend on the type of innovation involved and the development project type and the relatively low significance of financial measures for innovation projects in general. Additionally, measurability is not major significance factor for selecting measures, whereas the level of innovativeness were to be selected as important factor. The roles of the evaluators are affected. It is expected to help make government policy for R8D performance evaluation.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.20 no.4
• /
• pp.639-649
• /
• 2014

Purpose: This study evaluates the feasibility of Korean Advance Directives (K-AD) developed earlier. Method: From January 1 to February 28, 2013, data were collected from 330 adults through a self-reported questionnaire established by the authors based on literature review and expert consultation. The feasibility of K-AD was multi-dimensionally evaluated through four criteria: cognitive, psychological, document making and socially expecting aspects. Data were analyzed using t tests, one-way ANOVA, and Scheffe post hoc tests via the SAS 9.1.3 program. Results: The feasibility of K-AD differed significantly by gender (p=.003), educational level (p<.001), religion (p=.002), and self-reported health status (p=.039). Differences in the level of easiness with K-AD by gender (p=.008) and education (p=.047) were significant. Perceived simplicity of AD differed significantly by religion (p=.005), and the necessity of AD differed significantly by gender (p=.025) and religion (p=.005). Conclusion: K-AD are sufficiently feasible to be tentatively utilized in practice. This is the first study to explore the feasibility of K-AD on the basis of multiple aspects. However, further studies involving diverse populations and methodologies to validate the usefulness of K-AD are warranted.

• Current Research on Agriculture and Life Sciences
• /
• v.20
• /
• pp.83-90
• /
• 2002

Resistance to Phytophthora Capsici and horticultural characteristics of selections from the resistance sources such as PI123469, PI201234, PI201232, AC2258 (=Line 29), CM334, KC268, KC358, KC820, KC821, KC822, KC823 (Line 29), KC462, KC463, KC464 were evaluated and recorded in the process of seed increase. Selections of PI123469, PI201234, PI201232, AC2258, KC823 (Line 29 = AC2258) of them showed the highest level of resistance. A considerable difference in the level of resistance was observed between lines selected from the same sources. The variation between selections derived from the same source was thought to be attributable to natural cross-pollination that may have occurred during the seed increase. Therefore, securing self-pollinated seed by wrapping the flower buds before anthesis would be necessary to obtain genetically pore resistant lines. The next alternative would be to increase the seed in small net houses for single line or field cage.

• Journal of Information Management
• /
• v.41 no.4
• /
• pp.23-40
• /
• 2010

The needs for independent 'lifelong learning' is on the rise for the individuals living in today's fast-paced society. As a result, the significance of 'information literacy' as the core requirement for lifelong learning has become widely recognized. Some countries have even established standards for information literacy at the national level, and introduced programs to improve the overall level of information literacy in the school curriculum. In Korea, various studies have been done to identify the importance of information literacy, and also there are increasing offerings of information literacy programs in regular curriculum. Based on the result of self-efficiency assessment by the students who attended the information literacy courses, this study tries to examine the effects of those programs. It consequently confirms that these curriculums resulted in improvement of the information literacy of the students, and also provide some suggestions and guidelines for the design of the curriculum for information based on the findings.

• Journal of the Korea Society for Simulation
• /
• v.25 no.4
• /
• pp.43-52
• /
• 2016

Wireless sensor network (WSN) technology has been implemented using commercial off-the-shelf microcontrollers (MCUs), In this paper, we propose a simulation environment to realize the physical evaluation of FPGA-based node by considering vertically cross-layered WSN in terms of physical node device and network interconnection perspective. The proposed simulation framework emulates the physical FPGA-based sensor nodes to interoperate with the NS3 through the runtime infrastructure (RTI). For the emulation and interoperation of FPGA-based nodes, we extend a vendor-providing FPGA design tool from the host computer and a script to execute the interoperation procedures. The standalone NS-3 is also revised to perform interoperation through the RTI. To resolve the different time-advance mechanisms between the FPGA emulation and event-driven NS3 simulation, the pre-simulation technique is applied to the proposed environment. The proposed environment is applied to IEEE 802.15.4-based low-rate, wireless personal area network communication.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.3
• /
• pp.21-28
• /
• 2018

The objects of PV (Photovoltaic) monitoring system is to reduce the loss of system and operation and maintenance costs. In case of PV plants with configured of centralized inverter type, only 1 PV module might be caused a large loss in the PV plant. For this reason, the monitoring technology of PV module-level that find out the location of the fault module and reduce the system losses is interested. In this paper, a fault diagnosis algorithm are proposed using thermal and electrical characteristics of PV modules under failure. In addition, the monitoring system applied with proposed algorithm was constructed. The wireless sensor using LoRa chip was designed to be able to connect with IoT device in the future. The characteristics of PV module by shading is not failure but it is treated as a temporary failure. In the monitoring system, it is possible to diagnose whether or not failure of bypass diode inside the junction box. The fault diagnosis algorithm are developed on considering a situation such as communication error of wireless sensor and empirical performance evaluation are currently conducting.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.302-307
• /
• 2009

In this study, four Korean black raspberry wines were developed from different regions in Korea; Gochang (G), Heongsung (H), Jeongup (J), and Sungchang (S). Their flavor profiles were determined using a combination of volatile analysis and sensory evaluation. From the volatile analysis of the developed wines, 8 acids, 17 alcohols, 12 esters, 9 terpenes, 3 aldehydes and ketones, and 4 miscellaneous compounds were identified. Preferences of appearance, aroma, full-body, and overall acceptability in the developed wines were determined using 9-point hedonic scale by 43 panelists, compared with one commercial black raspberry wine (Sunw). The sweetness, sourness, astringency levels were also evaluated using 9-point just-about-right (JAR) scale. The mean overall acceptability score of Sunw (5.58) was the highest among the tested wines, followed by G (4.81), S (4.44), H (4.41), and J (4.13) (p<0.05). Sweetness levels in the developed wines were overall lower than JAR level, while sourness and astringency levels were overall higher than JAR level.

• Journal of radiological science and technology
• /
• v.42 no.4
• /
• pp.271-277
• /
• 2019

CareDose 4D which is the Siemens's Automatic Exposure Control (AEC) can adjust the level of radiation dose distribution which is based on organ characteristic unlike other manufacturer's AEC. Currently, a wide scan range containing different organs is sometimes examined at once (defined as one scan). The purpose of this study was to figure out which organ characteristic option is suitable when one scan method is utilized. Two types of anthropomorphic phantoms were scanned in the same range which were from frontal bone to carina level according to three different organ characteristics such as Thorax, Abdomen, and Neck. All scans and image reconstruction parameters were equally applied and radiation dose were compared. Radiation dose with Thorax organ characteristic was lower than that with Neck. Also, that with Abdomen oran characteristic was lower than Thorax. There were significant differences in radiation dose according to different organ characteristics at the same parameters (P<0.05). Usage of Neck organ characteristic had a result of the highest radiation dose to all phantom. On the other hand, utilization of Abdomen organ characteristic showed the lowest radiation dose. As a result, it is desirable to set appropriate organ characteristic according to examined body part when you checkup patients. Also, when you implement one scan method, selection of Abdomen-based organ characteristic has reduced more radiation dose compared with two different organ characteristic.